NVS AMP50 B III UHF 1 Output Pole Ampליפער באַניצער מאַנואַל

1. הקדמה

Thank you for choosing the NVS AMP50 B III UHF 1 Output Pole Amplifier. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your amplifier. Please read this manual thoroughly before using the product and retain it for future reference.

2. זיכערקייַט אינפֿאָרמאַציע

וויכטיק זיכערהייט אינסטרוקציעס:

• Ensure the power supply (PSUP01, not included) is disconnected before installation or maintenance.
• This device is designed for outdoor pole mounting. Ensure it is securely fastened.
• Protect all connections from moisture. The included rain cover must be used.
• דו זאלסט נישט ויסשטעלן די amplifier to extreme temperatures or direct sunlight for prolonged periods without proper shielding.
• Only use a 12V DC power supply as specified. Using an incorrect power supply may damage the device and void the warranty.
• די אינסטאַלאַציע זאָל דורכגעפירט ווערן דורך אַ קוואַליפֿיצירטן טעכניקער אויב איר זענט נישט זיכער וועגן קיין שריט.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

• NVS AMP50 B III UHF 1 Output Pole Ampליפער
• רעגן קאָווער
• באַניצער מאַנואַל (דעם דאָקומענט)

Note: The PSUP01 12V DC power supply is not included and must be purchased separately.

4. פּראָדוקט פֿעיִקייטן

The NVS AMP50 is a vertical audio amplifier designed to boost B III and UHF signals, ensuring optimal reception.

• Vertical audio amplifier with wide-band input (B III + UHF).
• Separate gain adjustments for B III (max. 18 dB) and UHF (max. 30 dB).
• Single signal output with F-connectors.
• Powered by 12V DC from the signal drop line via a PSUP01 power supply (not included).
• Includes a rain cover for outdoor protection.

פיגורע 4.1: NVS AMP50 B III UHF 1 Output Pole Ampליפיער. דאס בילד ווייזט דעם קאמפאקטן דיזיין פון דעם amplifier, highlighting its F-connectors for signal input and output, and the robust casing designed for outdoor use with a rain cover.

5. סעטאַפּ און ייַנמאָנטירונג

Follow these steps for proper installation of your NVS AMP50 ampלייבער:

1. מאָונטינג: סיקיורלי אָנקלאַפּן די amplifier to a pole in a suitable outdoor location, preferably close to the antenna. Ensure the mounting is stable and can withstand environmental conditions.
2. אַנטענע קשר: Connect your B III and UHF antenna cables to the respective input F-connectors on the amplifier. Ensure connections are tight and secure.
3. רעזולטאַט קשר: פאַרבינדן די amplifier's single output F-connector to your signal drop line, which leads to your television or distribution system.
4. רעגן קאָווער: Place the provided rain cover over the amplifier to protect it from weather elements. Ensure it is properly seated to prevent water ingress.
5. Power Supply (PSUP01): Connect the 12V DC power supply (PSUP01, not included) to the signal drop line. The amplifier receives power through this line. Ensure the power supply is connected indoors and away from moisture.
6. מאַכט אויף: Once all connections are secure and protected, plug in the PSUP01 power supply.

6. אַפּערייטינג ינסטרוקטיאָנס

The NVS AMP50 amplifier is designed for continuous operation once installed.

• געווינס אַדזשאַסטמאַנט: די amplifier features separate rotary controls for B III and UHF gain adjustment. Use a small screwdriver to carefully adjust the gain for each band to achieve optimal signal strength without over-amplification. Start with the lowest gain setting and gradually increase until desired signal quality is achieved on your television.
• סיגנאַל מאָניטאָרינג: Monitor your television's signal strength and quality indicators while adjusting the gain. Over-amplification can lead to signal distortion.
• מאַכט ינדיקאַטאָר: The PSUP01 power supply typically has an LED indicator to confirm it is receiving power and supplying it to the ampליפער.

7. וישאַלט

The NVS AMP50 ampדער ליפיער דארף מינימאַלע אויפהאלטונג.

• פּעריאָדיש דורכקוק: פּיריאַדיקלי דורכקוקן די amplifier and its connections for any signs of wear, corrosion, or damage, especially after severe weather conditions.
• רעגן קאָווער: Ensure the rain cover remains securely in place and is not damaged. Replace if necessary.
• רייניקונג: If necessary, gently clean the exterior of the ampליפיער מיט א ווייכע, דamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the power supply is disconnected before cleaning.
• פֿאַרבינדונג אָרנטלעכקייט: Check F-connections for tightness to prevent signal loss or ingress of moisture.

8. טראָובלעשאָאָטינג

אויב איר דערפאַרונג ישוז מיט דיין ampליפיער, זעט די פאלגענדע פראבלעם-לייזונג אנווייזונג:

If the problem persists after following these steps, please contact customer support.

9. ספּעסאַפאַקיישאַנז

10. וואָראַנטי און שטיצן

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official NVS webזייטל. האַלט דיין קויפן באַווייַז פֿאַר וואָראַנטי קליימז.

For further assistance, please contact NVS customer support through their official channels.