TASCAM TM-82 Dynamic Microphone Instruction Manual

1. הקדמה

The TASCAM TM-82 is a dynamic microphone engineered for capturing vocals and instruments. Its robust construction and cardioid directivity make it suitable for various live and studio applications, providing clear sound reproduction while minimizing unwanted ambient noise.

The TASCAM TM-82 dynamic microphone is designed for capturing vocals and instruments.

2. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

• TASCAM TM-82 Dynamic Microphone
• מיק האָלדער

The TM-82 microphone comes with a compatible mic holder for standard microphone stands.

3. סעטאַפּ

1. Attach the Mic Holder: Securely screw the included mic holder onto a standard microphone stand.
2. אָנקלאַפּן די מיקראָפאָן: Insert the TASCAM TM-82 microphone into the mic holder. Ensure it is firmly seated.
3. פאַרבינדן די קאַבלע: Connect an XLR cable (not included) to the XLR output connector at the base of the microphone. Connect the other end of the XLR cable to your mixer, audio interface, or ampליפער.
4. מאַכט: The TM-82 is a dynamic microphone and does not require phantom power for operation.

4. אַפּערייטינג ינסטרוקטיאָנס

4.1. מיקראָפאָן פּלאַצירונג

Optimal microphone placement is crucial for sound quality. Experiment with distance and angle to achieve the desired sound. The TM-82 features a cardioid directivity, meaning it is most sensitive to sound coming from the front and rejects sound from the sides and rear. This helps reduce feedback and isolate the intended sound source.

4.2. For Vocals

Position the microphone 2-6 inches (5-15 cm) from the vocalist's mouth. Adjust the distance to control proximity effect (increased bass response when close to the mic) and prevent plosives (harsh 'p' and 'b' sounds). The cardioid pattern helps minimize stage bleed from other instruments.

The TM-82 is suitable for vocal performances, capturing nuances while minimizing room noise.

4.3. For Instruments

When miking instruments, place the microphone in front of the sound source. For acoustic guitars, aim towards the soundhole or where the neck meets the body for a balanced sound. For guitar amplifiers, position the microphone close to the speaker cone. The robust metal construction ensures reliable performance.

The microphone can be used for miking instruments, providing clear sound reproduction.

5. ספּעסאַפאַקיישאַנז

This diagram illustrates the frequency response and unidirectional (cardioid) polar pattern of the TM-82 microphone, showing its sensitivity across different frequencies and directions.

6. וישאַלט

• רייניקונג: Use a soft, dry cloth to clean the microphone body. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
• סטאָרידזש: האַלט דעם מיקראָפאָן אין אַ טרוקענער, שטויב-פֿרײַער סביבה ווען ער ווערט נישט גענוצט. פֿאַרמײַדט עקסטרעמע טעמפּעראַטורן און פֿײַכטקייט.
• האַנדלינג: The TM-82 is built tough with metal materials, but avoid dropping or subjecting it to severe impacts, which can affect performance.

7. טראָובלעשאָאָטינג

• קיין סאָונד רעזולטאַט:
  • Ensure the XLR cable is securely connected to both the microphone and the input device (mixer, interface).
  • Check the input device's volume and gain settings.
  • Verify that the input channel on your device is selected and active.
• נידעריק באַנד:
  • פֿאַרגרעסערט דעם געווינס אויף אײַער מיקסער אָדער אַודיאָ אינטערפֿייס.
  • זיכער מאַכן אַז דער מיקראָפאָן איז אָפּטימאַל פּאַזיציאָנירט אין באַצוג צו דער געזונט מקור.
• Unwanted Noise/Feedback:
  • Reposition the microphone to utilize its cardioid pattern, aiming it away from speakers or noise sources.
  • קוק נאָך דעפעקטיווע קאַבלען אָדער פֿאַרבינדונגען.
  • Reduce gain levels if feedback persists.

8. וואָראַנטי און שטיצן

פֿאַר וואָראַנטי אינפֿאָרמאַציע און טעכנישע שטיצע, ביטע זען די באַאַמטער טאַסקאַם website or contact your local Tascam dealer. Warranty terms and conditions may vary by region.

באַזוכן די Tascam Store פֿאַר מער פּראָדוקטן און אינפֿאָרמאַציע.