1. הקדמה
This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your Pedrollo CPm 170 Water Pump. Please read this manual thoroughly before operating the pump to ensure proper use and to prevent damage or injury. Keep this manual for future reference.
2. זיכערקייַט אינסטרוקציעס
Always adhere to the following safety precautions to reduce the risk of electric shock, injury, or fire.
- עלעקטריקאַל זיכערקייַט: Ensure the pump is connected to a properly grounded electrical outlet. Do not operate the pump with a damaged power cord or plug. Disconnect power before performing any maintenance or installation.
- וואַסער זיכערקייַט: Do not operate the pump dry. Ensure the pump is fully submerged or primed before starting. Protect the pump from freezing temperatures.
- ייַנמאָנטירונג: Install the pump in a well-ventilated area. Ensure all connections are secure and leak-free.
- אָפּעראַציע: Do not allow children or untrained personnel to operate the pump. Avoid touching moving parts.
- וישאַלט: Only qualified personnel should perform repairs. Use only genuine Pedrollo replacement parts.
3. פּראָדוקט איבערview
The Pedrollo CPm 170 is a high-quality electric water pump designed for reliable performance in various applications. Below is an image illustrating the pump's main components.
This image displays the Pedrollo CPm 170 water pump, a blue-colored electric pump. It features a robust motor housing with cooling fins and a volute-shaped pump body. The inlet and outlet ports are visible, along with the electrical connection point.
4. סעטאַפּ און ייַנמאָנטירונג
פֿאָלגט די סטעפּס פֿאַר ריכטיקער אינסטאַלאַציע פֿון אייער וואַסער פּאָמפּע:
- אויספּאַקן: נעמט פֿאָרזיכטיק אַרויס די פּאָמפּע פֿון איר פֿאַרפּאַקונג. קוקט איבער צי עס זענען פֿאַראַן סימנים פֿון שאָדן בעתן טראַנספּאָרט.
- אָרט: Position the pump on a stable, level surface. Ensure adequate ventilation around the motor.
- פּייפּינג קאַנעקשאַנז: Connect the inlet pipe to the suction port and the outlet pipe to the discharge port. Use appropriate fittings and sealants to prevent leaks. Ensure pipes are adequately supported to avoid strain on the pump.
- עלעקטריקאַל קשר: Connect the pump to a grounded power supply that matches the voltage and frequency specifications of the pump. Consult a qualified electrician if unsure.
- Priming (if applicable): For non-self-priming pumps, fill the pump casing and suction line with water before starting to ensure proper operation.
5. אַפּערייטינג ינסטרוקטיאָנס
To operate the Pedrollo CPm 170 Water Pump:
- Ensure the pump is properly installed and primed (if necessary).
- Verify all connections are secure and there are no leaks.
- Switch on the power supply to the pump. The pump should start immediately.
- Monitor the pump during its initial operation for any unusual noises or vibrations.
- To stop the pump, switch off the power supply.
6. וישאַלט
רעגולערע אויפהאלטונג גאראנטירט די לאנגעוויטי און אפטימאלע פערפארמאנס פון אייער פאמפ.
- רעגולער דורכקוק: Periodically check for leaks, loose connections, or signs of wear on the power cord.
- רייניקונג: Keep the pump exterior clean and free from debris. Ensure cooling fins on the motor are not obstructed.
- ווינטעריזאַטיאָן: If the pump is exposed to freezing temperatures, drain all water from the pump and pipes to prevent damage from ice expansion.
- סטאָרידזש: Store the pump in a dry, protected area when not in use for extended periods.
7. טראָובלעשאָאָטינג
זעט די טאבעלע אונטן פאר אלגעמיינע פראבלעמען און זייערע מעגליכע לייזונגען.
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| פּאָמפּע טוט נישט אָנהייבן | No power; tripped circuit breaker; motor overload. | Check power supply; reset breaker; allow motor to cool. |
| פּאָמפּע אַרבעט אָבער קיין וואַסער פֿלוס נישט | Pump not primed; air in suction line; clogged impeller. | Prime the pump; check for air leaks in suction line; clean impeller. |
| רידוסט וואַסער לויפן | Partial clog; worn impeller; low voltage. | Check for clogs; inspect impeller; verify power supply voltage. |
| יבעריק ראַש אָדער ווייבריישאַן | Cavitation; bearing wear; loose mounting. | Ensure proper priming; inspect bearings (professional service); tighten mounting bolts. |
If problems persist after attempting these solutions, contact a qualified technician or Pedrollo customer support.
8. ספּעסאַפאַקיישאַנז
Key technical specifications for the Pedrollo CPm 170 Water Pump:
| באַשרייַבונג | ווערט |
|---|---|
| פאַבריקאַנט | פּעדראָלאָ |
| טייל נומער | קפּם 170 |
| פּונקט וואָג | 25 קילאָגראַמס |
| פּעקל דימענשאַנז | 42 X 29.8 X 26.7 סענטימעטער |
| נומער מאָדעל נומער | קפּם 170 |
| קאָליר | בלוי |
| מאַטעריאַל | ומבאַפלעקט שטאָל |
| מאַכט מקור טיפּ | ווייערד עלעקטריק |
| ערשטער דאַטע בנימצא | 30 מערץ 2021 |
| ASIN | B091BVPXRT |
9. וואָראַנטי און שטיצן
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized Pedrollo dealer. You may also visit the official Pedrollo webפּלאַץ פֿאַר ווייַטער הילף.
