1. הקדמה
This manual provides detailed instructions for the installation, operation, and maintenance of the Visionis VIS-3002 FPC-5674 Access Control Keypad System. This standalone indoor access control system features a digital touch keypad, a mini controller, Wiegand 26 compatibility, and supports EM cards and key fobs for up to 1000 users. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. פּעקל אינהאַלט
באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען אַרייַנגערעכנט אין אייער פּעקל:
- (1) VIS-3002 Access Control Indoor Only Digital Touch Keypad + Reader Standalone
- (1) VIS-MINI-CNTRL: 1 Door Controller for Access Control Systems
- (10) VS-VIS-KEYTAG: Access Control Proximity Contactless Smart Entry Keyfobs (26 bit, 125khz)
- (1) VISCP200: 12V 2Amp Power Supply Transformer (UL Listed)
- מאָנטירונג שרויפן און וואַנט אַנקערס
- שרויפנ - ציער
- וויירינג כאַרניס
- Diode IN4004 (for relay circuit protection)
- Master Add Card
- Master Delete Card
Figure 2.1: Visionis VIS-3002 Kit Contents, including the mini controller, remote control, Master Add Card, Master Delete Card, Diode IN4004, self-tapping screws, wall anchors, and screwdriver.
Figure 2.2: Visionis VIS-3002 Keypad System components including keypad, mini controller, power supply, and key fobs.
3. פֿעיִקייטן
- באַניצער קאַפּאַציטעט: שטיצט ביז 1000 באַניצער.
- אַקסעס מאָדעס: PIN code, proximity card, and/or proximity key tag.
- Mini Controller (VIS-MINI-CNTRL): Provides enhanced security by storing credentials internally, preventing tampering with the external keypad.
- Wiegand 26 Input/Output: Compatible with various Wiegand readers.
- אַנטי-טיampער שרעק: Activates if the keypad is illegally removed.
- Backlight Keypad: Easy to operate in low-light conditions.
- קאָרט שטיצן: 125KHz for EM cards and 13.56MHz for MFR cards.
- External Wired Doorbell Support: Allows connection of an external doorbell.
- שנעל לייענען: Searching time less than 0.1s after reading a card.
- מיקראָ פּראַסעסער: Built-in USA Atmel microprocessor for high security and reliability.
ווידעא 3.1: אפיציעלער פראדוקט איז פארבייview video for the Visionis VIS-3002 Access Control Keypad System, demonstrating its features and components.
Figure 3.2: Illustration of access methods for the Visionis VIS-3002 keypad: card, PIN code, and NFC phone access.
4. ספּעסאַפאַקיישאַנז
| באַשרייַבונג | דעטאַל |
|---|---|
| מאָדעל | VIS-3002 FPC-5674 |
| סאָרט | Visionis |
| מאַכט מקור | Corded Electric (12V 2Amp) |
| קאַנעקטיוויטי טעכנאָלאָגיע | ווייערד |
| קאָנטראָל מעטאָד | ריר |
| באַניצער קאַפּאַסיטי | 1000 יוזערז |
| Wiegand צובינד | וויגאנד 26 |
| קאָרט פרעקווענסי | 125KHz (EM cards), 13.56MHz (MFR cards) |
| אַפּערייטינג טעמפּעראַטור | -45°C ~ 55°C (-49°F ~ 131°F) |
| אַפּערייטינג הומידיטי | 0% ~ 95% |
| Keypad Dimensions (H x W x D) | 116 מם (4.56 אינטשעס) רענטגענ 71 מם (2.79 אינטשעס) רענטגענ 22 מם (0.86 אינטשעס) |
| Mini Controller Dimensions (L x W x H) | 65 מם (2.56 אינטשעס) רענטגענ 54 מם (2.13 אינטשעס) רענטגענ 19 מם (0.75 אינטשעס) |
Figure 4.1: Dimensions of the Visionis VIS-3002 keypad: 116mm (4.56in) height, 71mm (2.79in) width, 22mm (0.86in) depth.
Figure 4.2: Dimensions of the Visionis VIS-MINI-CNTRL mini controller: 65mm (2.56in) length, 54mm (2.13in) width, 19mm (0.75in) height.
5. סעטאַפּ און ייַנמאָנטירונג
5.1 זיכערהייט קאָנסידעראַטיאָנס
For optimal security, the VIS-MINI-CNTRL mini controller should be installed inside a restricted, secure area. All user credentials are stored on the mini controller, not on the external keypad. This prevents unauthorized access even if the external keypad is tampאויסגעמעקט מיט אָדער אַוועקגענומען.
Figure 5.1: Illustration of secure installation, with the mini controller installed inside a restricted area, controlling the locking device.
5.2 וויירינג די סיסטעם
The VIS-3002 keypad connects to the VIS-MINI-CNTRL mini controller via a Wiegand 26 interface. The mini controller then manages the locking device (e.g., magnetic lock, electric strike) and other peripherals like an exit button or doorbell.
- Connect the keypad's Wiegand output (D0, D1) to the mini controller's Wiegand input.
- Connect the 12V DC power supply to the mini controller.
- Wire the locking device to the NO (Normally Open) or NC (Normally Closed) terminals on the mini controller, as required by your lock type. Ensure the Diode IN4004 is installed across the lock terminals for relay protection.
- Connect an exit button to the 'OPEN' terminal and GND on the mini controller.
- Connect an external doorbell to the appropriate terminals if desired.
Figure 5.2: Diagram showing the Visionis VIS-MINI-CNTRL mini controller connected to various Wiegand readers, illustrating its versatility.
Figure 5.3: Internal board view און זייַט view of the Visionis VIS-MINI-CNTRL mini controller, showing connection points.
Figure 5.4: The 12V 2Amp power supply transformer included with the Visionis VIS-3002 system.
6. אָפּעראַציע
6.1 אַדינג יוזערז
Use the Master Add Card to enroll new proximity cards or key fobs. Follow the specific programming instructions provided with your mini controller for adding user PINs.
6.2 Gaining Access
Users can gain access using one of the following methods:
- PIN קאָד: Enter your assigned PIN code on the keypad.
- Proximity Card/Key Fob: Present your registered card or key fob to the keypad reader.
- Card + PIN: For enhanced security, some configurations may require both a card/key fob and a PIN code.
The keypad features a backlight for easy visibility and operation at night.
6.3 Exiting
To exit, press the connected exit button or use the remote control if configured.
7. וישאַלט
- רייניקונג: Wipe the keypad surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- קשר טשעק: קאָנטראָלירט פּעריִאָדיש אַלע וויירינג פֿאַרבינדונגען צו זיכער מאַכן אַז זיי זענען זיכער און פֿרײַ פֿון קעראָוזשאַן.
- Firmware דערהייַנטיקונגען: Check the Visionis webזייטל פֿאַר אַלע בנימצא פירמווער דערהייַנטיקונגען פֿאַר דיין סיסטעם.
8. טראָובלעשאָאָטינג
- קיין מאַכט: Ensure the 12V 2Amp power supply is correctly connected and receiving power. Check all wiring.
- קלאַוויאַטור רעאַגירט נישט: Verify power supply. If the keypad is completely unresponsive, check for loose connections or damage.
- Access Denied: Ensure the card/key fob is correctly enrolled. Verify the PIN code is correct. Check if the user capacity has been reached.
- אַנטי-טיampער שרעק: If the alarm sounds, it indicates the keypad has been illegally removed or tampered with. Re-secure the keypad and reset the system if necessary.
- טיר עפֿנט זיך נישט: Check the wiring to the locking device and ensure it is receiving power from the mini controller. Verify the lock type (NO/NC) matches the controller's configuration.
For further assistance, please contact Visionis customer support.
9. וואָראַנטי און שטיצן
Visionis products are designed for reliability and performance. For warranty information and technical support, please refer to the official Visionis webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט. האלט אייער קויף קוויטל אלס באווייז פון קויפן פאר גאראנטיע קליימס.
