הקדמה
Thank you for choosing the ASD LED 32 Inch Oval Flush Mount Light Fixture. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.
זיכערקייַט אינפֿאָרמאַציע
ווארענונג: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
This fixture is designed for use in dry and damp locations. Do not install in wet locations. Ensure all connections are secure and properly insulated. Do not exceed the specified voltagדי קייט פון 100-277 וו.
פּראָדוקט פֿעיִקייטן
- Bright & Powerful: Equipped with energy-efficient 45W LEDs, delivering 3750 lumens of illumination.
- Tunable Light (3CCT): Offers three selectable color temperatures (3000K warm white, 4000K cool white, 5000K daylight) to customize your lighting ambiance.
- גלאַט דימינג: Features flicker-free Triac dimming, allowing brightness adjustment from 10% to 100% with compatible dimmer switches.
- Multi-Voltage אָפּעראַציע: Operates efficiently within a 100-277V range, ensuring stable performance.
- לאנג לעבן: Engineered for longevity with an average life of 50,000 hours, providing dependable lighting for over 50 years under normal use.
- סערטאַפייד קוואַליטעט: ETL and Energy Star certified, complying with stringent safety and energy standards.
- דוראַבאַל פּלאַן: Constructed with a durable alloy steel housing, frosted acrylic shade, and solid metal base, resistant to rust and impacts.
Figure 1: Key Features of the ASD LED Light Fixture.
Figure 2: 3CCT Color Temperature Options.
ינסטאַלירונג אינסטרוקציעס
מכשירים פארלאנגט: Screwdriver, Wire Strippers, Drill (if anchors are needed).
וויכטיק: Before starting installation, ensure the power supply to the fixture location is turned off at the circuit breaker or fuse box.
- צוגרייטן די פיקסטור: Unscrew the cap nuts counter-clockwise and carefully remove the metal ring and the lens from the fixture.
- צוטשעפּען מאַונטינג פּלאַטע: Attach the mounting plate to the outlet box using two screws. If necessary, use the mounting plate as a template to mark the location for wall anchors. Drill appropriate sized holes for anchors, insert anchors, and then secure the self-tapping screws into the anchors.
- פאַרבינדן וויירינג: Connect the electrical wires: Black to Black (Live), White to White (Neutral), and Ground to Ground (Bare Copper or Green). Secure connections with wire nuts. Carefully tuck all wires back into the outlet box.
- Secure Fixture & Select CCT: Feed the self-tapping screws through the keyhole slots on the fixture's back plate and tighten them to secure the fixture to the mounting plate. Before fully securing, locate the CCT switch on the fixture and choose your desired color temperature (3000K, 4000K, or 5000K). Once the CCT is selected, secure the lens and metal ring to the fixture pan using the cap nuts.
Figure 3: Installation Steps.
For a full cut sheet and detailed installation guide, please refer to the official PDF manual: ASD LED Flush Mount Manual (PDF)
אַפּערייטינג ינסטראַקשאַנז
Once installed and powered, the light fixture can be operated using a standard wall switch. If a compatible Triac dimmer switch is installed, you can adjust the brightness from 10% to 100% by manipulating the dimmer control. The color temperature is set via a switch on the fixture itself during installation and cannot be changed without accessing the fixture.
וישאַלט
The ASD LED Flush Mount Light Fixture requires minimal maintenance. To clean the fixture, ensure the power is off and allow it to cool. Wipe the exterior surfaces with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| ליכט טוט נישט קער אויף. | קיין מאַכט צו די ייַנאָרדענונג. אומרעכט וויירינג. פאַלש באַשטימען. | טשעק קרייַז צוימען / קאָריק. באַשטעטיקן די וויירינג קאַנעקשאַנז. פּרובירן אָדער פאַרבייַטן די באַשטימען. |
| ליכט פליקערט אדער פארשוואכט אומגעריכט. | נישט-קאמפאטיבלע דימער סוויטש. פרייַ וויירינג קשר. Voltage פלאַקטשויישאַנז. | Ensure dimmer is Triac compatible. קאָנטראָלירן און באַוואָרענען אַלע וויירינג. Verify stable power supply (100-277V). |
| Light output is too low/high. | דימער סעטינג. Incorrect CCT selection. | Adjust dimmer to desired level. Re-check CCT switch setting on fixture (requires re-accessing fixture). |
ספּעסאַפאַקיישאַנז
| אַטריביוט | דעטאַל |
|---|---|
| סאָרט | אַסד |
| מאָדעל נאָמען | געפירט טאָפּל רינג פלושמאָונט |
| נומער מאָדעל נומער | A-LFMOV-M32D45C-N-2p |
| קאָליר | Brushed Nickel (2pk) |
| מאַטעריאַל | Durable Alloy Steel Housing, Frosted Acrylic Shade, Matte White Diffuser Cover, Solid Metal Base |
| פּראָדוקט דימענשאַנז | 32.44"ל x 18.13"בר x 4.81"ה |
| ליכט מקור טיפּ | געפירט |
| וואָסtage | 45 וואטס |
| ברייטנאַס | 3750 לומען |
| ליכט קאָליר | 3000K/4000K/5000K (CCT Adjustable) |
| Voltage | 100-277 וואלטס |
| דימאַבלע | Yes (Triac Dimming) |
| דורכשניטלעך לעבן | 50,000 שעה |
| Certification | ETL, Energy Star, cETL |
| דרינענדיק / דרויסנדיק באַניץ | אינעווייניק (דamp Locations Rated) |
| פּונקט וואָג | 7.8 פונט |
| אַרייַנגערעכנט קאַמפּאָונאַנץ | Light Fixture, Mounting Plate, Screws, Anchors, Wire Nuts |
Figure 4: Product Specification Diagram.
וואָראַנטי און שטיצן
This ASD LED Flush Mount Light Fixture is covered by a 5-יאָר פאַבריקאַנט ס וואָראַנטי. This warranty ensures quality, safety, and a positive user experience. For any questions, technical assistance, or warranty claims, please contact ASD customer support. Contact information can typically be found on the product packaging or the official ASD Lighting webפּלאַץ.
Figure 5: Warranty and Certifications.
פּראָדוקט אַפּפּליקאַטיאָן עקסamples
Figure 6: Versatile Applications of the Light Fixture.
