Habitat Decor MR3802W 30-אינטש קייַלעכיק קאַרווד ראַם שפּיגל באַניצער מאַנואַל

1. פּראָדוקט איבערview

The Habitat Decor MR3802W is a 30-inch round mirror designed to enhance your living space. It features a wooden frame with ridged details and a distressed white finish, offering a rustic aesthetic. This mirror is intended for wall mounting and measures 30 inches in length and 30 inches in width.

• דימענסיעס: 30 inches (76.2 cm) long x 30 inches (76.2 cm) wide
• ראַם מאַטעריאַל: האלץ
• ענדיקן: נויט ווייסע
• מאַונטינג טיפּ: וואנט בארג

פיגורע 1: פראָנט view of the Habitat Decor 30-inch round mirror, showcasing its distressed white carved frame.

2. וויכטיק סאַפעטי אינפֿאָרמאַציע

Please read and understand all safety instructions before handling or installing the mirror. Failure to follow these instructions may result in injury or damage to the product.

• ווארענונג: This mirror contains breakable glass. Always handle with extreme care to prevent injury.
• For wall mounting, ensure the chosen wall surface is structurally sound and level to securely support the mirror's weight (approximately 9.7 pounds or 4.4 kg).
• Avoid placing the mirror near direct heat sources, open flames, or areas prone to significant vibration, as this can increase the risk of breakage.
• In the event of breakage, exercise caution when cleaning up shattered glass to avoid cuts. Use protective gloves and dispose of glass fragments safely.
• Keep out of reach of children and pets during installation and ensure it is securely mounted afterward.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן און נישט געשעדיגט איידער איר גייט ווייטער מיט דער אינסטאַלאַציע.

• 1 x Habitat Decor MR3802W 30-inch Round Carved Frame Mirror
• Pre-installed hanging hardware (D-rings or similar, typically on the back)

Note: Mounting screws, wall anchors, and tools are not included and must be supplied by the user based on wall type.

4. ינסטאַלירונג אינסטרוקציעס

The Habitat Decor MR3802W mirror is designed for wall mounting and requires no assembly. Follow these steps for secure installation:

1. קלייַבן אָרט: Select a suitable wall location, ensuring it is free from electrical wires, plumbing, or other obstructions. The wall must be capable of supporting the mirror's weight (approximately 9.7 lbs).
2. קלייַבן מכשירים: You will need a measuring tape, pencil, level, drill, appropriate wall anchors (e.g., drywall anchors, toggle bolts, or stud screws depending on your wall type), and screws.
3. Measure Hanging Points: On the back of the mirror, locate the pre-installed hanging hardware (typically two D-rings or keyhole hangers). Measure the distance between the centers of these hangers.
4. מארק וואנט: Transfer this measurement to your chosen wall location. Use a level to ensure the marked points are perfectly horizontal.
5. אינסטאַלירן אַנקערס/שרויף: Drill pilot holes at the marked points and install appropriate wall anchors if not drilling into a wall stud. Insert screws into the anchors or studs, leaving a small portion of the screw head exposed for the mirror's hangers to rest on.
6. הענגען שפּיגל: Carefully lift the mirror and align the pre-installed hanging hardware on the back with the screws on the wall. Gently lower the mirror until it is securely seated on the screws.
7. באַשטעטיקן סטאַביליטי: לייכט ציען דעם שפּיגל צו זיכער מאַכן אַז ער איז סטאַביל און זיכער באַפעסטיקט צו דער וואַנט.

פיגורע 2: דערציען view of the mirror, illustrating the pre-installed hanging hardware for wall mounting.

5. קער און וישאַלט

Proper care will help maintain the appearance and longevity of your mirror.

• רייניקונג די שפּיגל ייבערפלאַך: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the frame edges. Wipe gently until clean and streak-free.
• רייניקונג די ראַם: The wooden frame with its distressed white finish should be cleaned with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
• האַנדלינג: Always lift the mirror by its frame, not by the glass.
• סוויווע: Avoid exposing the mirror to extreme temperature changes or high humidity, which can affect the wood frame and mirror backing.

Figure 3: Detail of the mirror's distressed white carved wooden frame.

6. טראָובלעשאָאָטינג

This section addresses common concerns you might encounter with your mirror.

7. פּראָדוקט ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

Based on the provided information, this product does not come with a manufacturer's warranty ("No Warranty").

For any questions regarding the product or assistance with installation, please refer to the retailer's customer service or contact the manufacturer, Brewster Home Fashions, directly.

• פאַבריקאַנט: Brewster Home Fashions
• געשעפטס-ארט: RANDOLPH, MA, 02368 US