NOCO Genius GENPRO10X1

1. פּראָדוקט איבערview

The NOCO GENPRO10X1 is a fully-sealed, waterproof onboard battery charger designed for a single 12-volt battery, delivering 10 amps. It is suitable for charging and maintaining various battery types, including lead-acid (flooded, AGM, gel) and lithium-ion (LiFePO₄) batteries. This re-engineered charger is 27% smaller and offers 19% more power than its predecessor, making it a compact and powerful solution for marine and outdoor environments.

2. פּעקל אינהאַלט

• GENPRO10X1 10A 1-Bank Smart Waterproof Onboard Marine Battery Charger and Battery Maintainer (120-240VAC)
• Onboard Marine Battery Charger User Guide
• (2) Black Truss-Head Screws

3. שליסל פֿעיִקייטן

• סאָליד און שטאַרק: 41% smaller and 33% more powerful than the GEN1, engineered for harsh marine environments.
• Single Bank Charging: רייטאַד בייַ 10 amps for a single 12V battery, ideal for marine, boat, starter, and deep-cycle systems.
• ווערסאַטאַל טשאַרדזשינג מאָדעס: Selectable modes for 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, allowing precise charging for various battery chemistries.
• Precision Charging: Integrated thermal sensor automatically adjusts charging based on ambient temperature to prevent overcharging or undercharging.
• Dead Battery Recovery: Can charge batteries as low as 1 volt, with a Force Mode to manually initiate charging for deeply discharged batteries down to zero volts.
• Redefined Mounting: Simplified system for fast, secure installation in any orientation, featuring an anti-vibration backing.
• וואָטערפּרוף פּלאַן: Fully-sealed, IP68 rated for waterproof protection, tested to withstand thousands of hours underwater.
• אָטאַמאַטיק אָפּעראַציע: Provides year-round, all-season, all-weather charging with zero overcharge, automatically returning to its last selected mode.

4. סעטאַפּ און ייַנמאָנטירונג

The GENPRO10X1 is designed for easy and secure installation. It includes 72-inch DC cables with 3/8-inch eyelets and a 72-inch AC cable (Type-B). The redesigned mounting system allows for installation in any orientation, including upside down, and features an anti-vibration backing to minimize shock and noise.

1. קלייַבן אַ מאַונטינג אָרט: Select a secure, dry location within your marine vessel or vehicle. The charger's IP68 rating ensures protection against water, but proper ventilation is always recommended.
2. זיכער מאַכן דעם טשאַרדזשער: Use the two included truss-head screws to firmly mount the charger. The anti-vibration backing helps to isolate shock and noise.
3. פאַרבינדן צו באַטאַרייע: Attach the 3/8-inch eyelets of the DC cables to your 12V battery terminals. Ensure correct polarity: red to positive (+), black to negative (-).
4. פאַרבינדן צו AC מאַכט: Plug the Type-B AC cable into a standard 120-240VAC outlet.

בילד באַשרייַבונג: The NOCO Genius GENPRO10X1 charger is shown installed in a boat's battery compartment, connected to a deep cycle battery. This illustrates the compact size and on-board installation capability.

בילד באַשרייַבונג: The NOCO Genius GENPRO10X1 charger is depicted being splashed with water, emphasizing its IP68 waterproof rating and suitability for marine environments.

5. אַפּערייטינג ינסטרוקטיאָנס

The GENPRO10X1 features selectable charging modes to optimize performance for nearly any battery chemistry or condition. The charger automatically detects ambient temperature and adjusts the charge cycle accordingly.

1. מאַכט אויף: Once connected to the battery and AC power, the charger will automatically begin its diagnostic and charging process.
2. אויסקלייבן טשאַרדזשינג מאָדע: Press the 'MODE' button to cycle through the available charging modes:
   • 12 וו: For 12V wet cell, gel, enhanced flooded, maintenance-free, and calcium batteries.
   • 12V AGM: פֿאַר 12 וו אַגם באַטעריז.
   • 12V ליטיום: For 12V lithium-ion batteries (LiFePO₄) with Battery Management Systems (BMS).
   • 12V Repair Mode: Used to repair old, idle, damaged, stratified, or sulfated 12V lead-acid batteries.
3. Force Mode (for Dead Batteries): For batteries as low as zero volts, press and hold the 'MODE' button for approximately three (3) seconds to activate Force Mode. This allows manual charging to begin.
4. טשאַרדזשינג ינדיקאַטאָרס: The charger features LED indicators to show the charging status and battery health. A solid green light indicates a fully charged battery.

בילד באַשרייַבונג: An illustration detailing the various advanced charging modes available on the NOCO Genius GENPRO10X1, including 12V, 12V AGM, 12V Lithium, Repair Mode, and Force Mode, with descriptions of their applications.

בילד באַשרייַבונג: A hand is shown pressing the 'MODE' button on the NOCO Genius GENPRO10X1 charger, demonstrating the activation of Force Mode to charge a deeply discharged battery, with a multimeter showing zero volts.

6. וישאַלט

The GENPRO10X1 is designed to be a battery maintainer, ensuring optimal battery health over extended periods. It provides all-season, all-weather charging and automatically prevents overcharging. Simply leave it plugged in to keep your battery topped off and extend its lifespan.

• Regularly inspect the charger and cables for any signs of damage.
• האַלט דעם טשאַרדזשער ריין און פריי פון שמוץ.
• Ensure proper ventilation around the charger, even though it is sealed.

בילד באַשרייַבונג: The NOCO Genius GENPRO10X1 is shown connected to a battery, illustrating its completely automatic, worry-free charging capabilities, including year-round charging, zero overcharge, and auto memory.

7. טראָובלעשאָאָטינג

If you encounter issues with your GENPRO10X1 charger, please refer to the detailed user guide included in the package. Common issues and their solutions are typically covered there. Ensure all connections are secure and the correct charging mode is selected for your battery type.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

The NOCO GENPRO10X1 is backed by a 3 יאָר וואָראַנטי. For support or warranty claims, please refer to the contact information provided in your user guide or visit the official NOCO website. The product is engineered in the USA.