1. הקדמה
The TOA AT-10K-AM is a remote volume control designed for use in commercial and residential audio systems. This single-gang attenuator provides precise 10k Ohm resistance control over audio levels, allowing for convenient adjustment of sound output from a wall-mounted location. This manual provides essential information for the safe and correct installation, operation, and maintenance of your AT-10K-AM unit.
פיגורע 1: פראָנט view of the TOA AT-10K-AM Remote Volume Control. This image displays the front view of the TOA AT-10K-AM Remote Volume Control. It features a light gray single-gang wall plate with a central circular knob for volume adjustment. Markings '0' and 'max' indicate the minimum and maximum volume settings, respectively. The word 'Volume' is printed below the knob. Two screw holes are visible at the top and bottom for mounting.
2. זיכערקייַט אינפֿאָרמאַציע
To ensure safe operation and prevent damage to the unit or injury to personnel, please observe the following safety precautions:
- קוואַלאַפייד פּערסאַנעל: Installation and wiring should only be performed by qualified and experienced personnel.
- מאַכט דיסקאַנעקשאַן: Always disconnect power to the audio system before installing, wiring, or servicing the volume control.
- ריכטיק וויירינג: Ensure all wiring connections are correct and secure according to the wiring diagrams provided with your audio system and this device. Incorrect wiring can cause damage or fire.
- ינווייראַנמענאַל טנאָים: Do not install the unit in locations exposed to direct sunlight, high temperatures, high humidity, dust, or vibrations.
- ויסמיידן נעץ: דו זאלסט נישט ויסשטעלן די אַפּאַראַט צו רעגן אָדער נעץ.
- געהעריק נוצן: Use the unit only for its intended purpose as a remote volume control for audio systems.
3. פּעקל אינהאַלט
באַשטעטיקן אַז אַלע זאכן וואָס זענען ליסטעד אונטן זענען אַרייַנגערעכנט אין דעם פּעקל:
- TOA AT-10K-AM Remote Volume Control Unit (1)
- מאָונטינג סקרוז (2)
- אינסטרוקציע מאַנואַל (דעם דאָקומענט)
4. אויפשטעלן און אינסטאַלירן
Follow these steps for proper installation of the AT-10K-AM volume control:
4.1 מאַונטינג
- Prepare Wall Box: Ensure a standard single-gang electrical wall box is installed at the desired location.
- רוט וויירינג: Route the audio signal wires from your amplifier or audio source to the wall box.
- זיכערע איינהייט: Carefully align the AT-10K-AM unit with the wall box and secure it using the provided mounting screws. Do not overtighten.
- ינסטאַלירן פאַסעפּלאַטע: If a separate decorative faceplate is used (not included), install it over the unit.
4.2 וויירינג קאַנעקשאַנז
The AT-10K-AM functions as a 10k Ohm potentiometer. Refer to your amplifier or audio system's manual for specific wiring requirements for remote volume controls. A typical wiring configuration involves connecting the audio signal through the attenuator.
- אַרייַנשרייַב קשר: Connect the audio input signal wires to the designated input terminals on the AT-10K-AM.
- רעזולטאַט קשר: Connect the audio output signal wires from the AT-10K-AM to the amplifier or next component in the audio chain.
- גראָונדינג: Ensure proper grounding as specified by your audio system's manufacturer to prevent hum or noise.
באַמערקונג: Always double-check wiring before restoring power to the system. Incorrect wiring can lead to equipment damage.
5. אַפּערייטינג ינסטרוקטיאָנס
Operating the TOA AT-10K-AM is straightforward:
- מאַכט אויף: Ensure your audio system is powered on and functioning.
- סטרויערן באַנד: Rotate the central knob clockwise to increase the audio volume and counter-clockwise to decrease it.
- מינימום באַנד: Turning the knob fully counter-clockwise will set the volume to its minimum level, indicated by '0'.
- מאַקסימום באַנד: Turning the knob fully clockwise will set the volume to its maximum level, indicated by 'max'.
The AT-10K-AM provides smooth and continuous volume adjustment within its operational range.
6. וישאַלט
The TOA AT-10K-AM is designed for long-term, reliable operation with minimal maintenance. Follow these guidelines:
- רייניקונג: Periodically wipe the surface of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- דורכקוק: Occasionally inspect the unit for any visible damage or loose connections. If any issues are found, consult qualified service personnel.
- קיין באַניצער סערוויסאַבלע פּאַרץ: The unit contains no user-serviceable parts. Do not attempt to open or repair the unit yourself.
7. טראָובלעשאָאָטינג
If you encounter issues with your AT-10K-AM, refer to the following table for common problems and solutions:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| No sound or very low sound output. |
|
|
| פארדרייטע אדער גערוישפולע גערויש. |
|
|
| Volume control feels loose or unresponsive. |
|
|
If the problem persists after attempting these solutions, contact TOA customer support or a qualified service technician.
8. ספּעסאַפאַקיישאַנז
Key specifications for the TOA AT-10K-AM Remote Volume Control:
- מאָדעל: AT-10K-AM
- קעגנשטעל: 10K Ohm
- קאָנטראָל טיפּ: Remote Volume Control / Attenuator
- מאָונטינג: Single-gang wall plate
- סיגנאַל פֿאָרמאַטירונג: אַנאַלאָג
- דימענסיעס: Standard single-gang wall plate size (exact dimensions may vary slightly by region/manufacturer)
- וואָג: בעערעך 2 פונט (0.9 קג)
ספּעציפֿיקאַציעס זענען אונטערטעניק צו ענדערונגען אָן באַמערקן פֿאַר פּראָדוקט פֿאַרבעסערונג.
9. וואָראַנטי & שטיצן
For warranty information and technical support regarding your TOA AT-10K-AM Remote Volume Control, please refer to the warranty card included with your purchase or visit the official TOA website. You may also contact TOA customer service directly for assistance with product inquiries, troubleshooting, or service requests.
TOA Corporation: www.toa-corp.com
