FLEXISPOT EN2 עלעקטריש שטייענדיק טיש באַניצער מאַנואַל

1. וויכטיק סאַפעטי אינפֿאָרמאַציע

Read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• דעם שרייַבטיש איז דיזיינד בלויז פֿאַר דרינענדיק נוצן.
• Ensure all screws are tightened securely before use. Periodically check and re-tighten all fasteners.
• Do not overload the desk. The maximum weight recommendation is 176 pounds (80 kg).
• האַלט קינדער און חיות אַוועק פון דעם טיש בעת אָפּעראַציע.
• Avoid placing the desk in direct sunlight or in damp ינווייראַנמאַנץ.
• נעמט נישט אויס אדער מאדיפיצירט נישט די עלעקטרישע קאמפאנענטן פונעם טיש. קאנטאקטירט קאסטומער סופארט פאר סערוויס.

Warning: The product will arrive in two separate packages and may be shipped separately. Do not discard any packaging until assembly is complete and the desk is fully functional.

2. פּעקל אינהאַלט

Your FLEXISPOT EN2 Electric Standing Desk is shipped in two packages. Please ensure you have received both packages before beginning assembly.

• פּעקל 1: Desktop (48" Mahogany Top)
• פּעקל 2: Desk Frame (Gray Frame), Motor, Control Panel, Power Strip, Cable Management Tray, Hardware, and User Manual.

Figure 2.1: The FlexiSpot EN2 desk components are shipped in two separate packages for safe delivery.

3. סעטאַפּ און אַסעמבלי

Assembly typically requires one person and approximately 30-60 minutes. An electric drill (not included) may be helpful for certain steps.

1. אָפּלייגן קאַמפּאָונאַנץ: Carefully remove all parts from both packages and lay them out on a soft, clean surface to prevent scratches. Verify all components are present against the packing list.
2. צוזאַמענשטעלן טיש ראַם: Attach the lifting columns to the feet. Ensure the crossbeam is correctly oriented.
3. Attach Crossbeam: Secure the crossbeam to the lifting columns. Note that while some holes are pre-drilled for legs, the center holes for the crossbeam and cable tray may require self-tapping screws. Apply firm pressure with an electric drill for easy installation.
4. Install Motors and Control Box: Follow the manual to connect the motor cables to the control box and secure the control box to the frame.
5. צוטשעפּען דעסקטאָפּ: Carefully place the desktop onto the assembled frame. Align the pre-drilled holes on the desktop with the frame and secure with screws.
6. Install Control Panel and Power Strip: Mount the 6-button digital control panel and the clamp-on power strip to the desired location on the desktop. The power strip can be clipped to the back or side.
7. קאַבלע פאַרוואַלטונג: Utilize the included cable management device to organize and secure all power and data cables underneath the desk. This helps prevent cables from snagging during height adjustments.

Figure 3.1: Assembled FLEXISPOT EN2 Electric Standing Desk.

Figure 3.2: Effective cable management keeps your workspace tidy and safe.

4. אַפּערייטינג ינסטרוקטיאָנס

The desk features a 6-button digital controller for easy height adjustment and memory presets.

4.1 הייך אַדזשאַסטמאַנט

• הייבן דעם טיש: Press and hold the 'Up' arrow button (▲) to raise the desk. The LED display will show the current height.
• נידעריקער טיש: Press and hold the 'Down' arrow button (▼) to lower the desk. The LED display will show the current height.
• The motorized system adjusts smoothly from 28.1 inches to 45.7 inches. The motor operates quietly at less than 50 dB.

4.2 זכּרון פאָרגעשטעלטע סעטטינגס

The controller features 4 programmable memory presets to quickly switch between your preferred sitting and standing heights.

1. Adjust the desk to your desired height using the Up/Down arrow buttons.
2. Press the 'M' button (Memory). The display will show 'S-'.
3. Press one of the number buttons (1, 2, 3, or 4) within 3 seconds. The display will show 'S-1', 'S-2', etc., indicating the height is saved to that preset.
4. כדי צוריקצורופן א געשפארטע הייך, דריקט פשוט דעם קארעספאנדירנדיקן נומער קנעפל (1, 2, 3, אדער 4). דער טיש וועט זיך אויטאמאטיש באוועגן צו דער געשפארטער פאזיציע.

4.3 Integrated Power Strip and USB Ports

The desktop is equipped with a removable power strip for convenient device charging and power access.

• די מאַכט סטריפּ כולל 3 AC אַוטלעץ (125V/12A) און 2 USB טשאַרדזשינג פּאָרץ (5V/2A).
• It can be clipped to the back or side of your desk to suit your setup.

Figure 4.1: Digital control panel for height adjustment and memory presets.

Figure 4.2: Integrated power strip with AC outlets and USB charging ports.

4.4 Timer Function (if available on your model)

Some models may include a timer function to remind you to switch between sitting and standing positions. Refer to your specific model's manual for details on setting and using this feature.

5. פֿעיִקייטן

• גאַנץ דעסקטאַפּ: The 1-inch eco-friendly desktop provides a seamless and spacious work surface, offering enhanced stability compared to multi-piece desktops.
• דוראַבאַל קאַנסטראַקשאַן: Constructed with an industrial-grade steel frame and solid tabletop, the desk can support up to 176 pounds (80 kg). Each frame undergoes rigorous testing for performance and durability.
• גערונדענע ווינקלען: The desktop features rounded corners for safety and to prevent accidental bumps or damage.
• שטיל אָפּעראַציע: The motor operates at less than 50 dB, ensuring a quiet work environment during height adjustments.

Figure 5.1: The whole-piece desktop offers enhanced stability and a smooth surface.

Figure 5.2: The desk operates with a quiet motor, producing less than 50 dB of noise.

Figure 5.3: The desk's robust construction supports up to 176 lbs.

6. וישאַלט

• רייניקונג: ווישט דעם דעסקטאַפּ און ראַם מיט אַ ווייכן, דamp שטאָף. ויסמיידן אַברייסיוו קלינערז אָדער האַרב קעמיקאַלז וואָס קען שעדיקן די ענדיקן.
• דורכקוק: קאָנטראָלירט פּעריִאָדיש אַלע שרויפן און באָלטן צו זיכער מאַכן אַז זיי זענען פֿעסט. פֿעסטשטײַערט ווידער אויב נייטיק.
• קאַבלע פאַרוואַלטונג: Ensure cables remain neatly organized and are not pinched or strained during height adjustments.

7. טראָובלעשאָאָטינג

• שרייַבטיש ניט מאָווינג: Check all cable connections, especially the power cord and motor cables. Ensure the power outlet is functional.
• אומבאַקוועם באַוועגונג: Perform a reset procedure (refer to the full user manual for specific steps). Ensure the desk is not overloaded or obstructed.
• טעות קאָדעס: If an error code appears on the LED display, consult the comprehensive user manual for specific troubleshooting steps related to that code.

8. ספּעסאַפאַקיישאַנז

Figure 8.1: Key dimensions and features of the FLEXISPOT EN2 desk.

9. וואָראַנטי און שטיצן

פלעקסיספּאָט גיט פולשטענדיקע וואָראַנטי קאַווערידזש פֿאַר דיין EN2 עלעקטריש שטייענדיק טיש:

• 5 יאָר וואָראַנטי: Applies to frames, motors, and other mechanical devices.
• 2 יאָר וואָראַנטי: Applies to controllers, switches, and electronics.

For customer support, troubleshooting assistance, or warranty claims, please visit the official FLEXISPOT webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט גלייך.

10. אפיציעלע פּראָדוקט ווידעאָס