וואָנעטס VAP11AC דואַל באַנד AC1200 ווירעלעסס בריק ריפּיטער מיני ראַוטער באַניצער מאַנואַל

1. הקדמה

The VONETS VAP11AC is a versatile dual-band AC1200 wireless device designed to function as a WiFi Bridge, Repeater, Mini Router, WiFi to RJ45 Ethernet Adapter, and WiFi Hotspot Signal Extender. It supports both 2.4GHz and 5GHz wireless frequencies, offering a combined theoretical data transfer rate of up to 1200Mbps. This device is equipped with a smart cooling fan for stable operation and includes a 12V/1A power supply adapter.

This manual will guide you through the setup, configuration, and operation of your VAP11AC device to ensure optimal performance in various networking scenarios.

Figure 1.1: VONETS VAP11AC device with included accessories.

2. פּראָדוקט פֿעיִקייטן

• Dual Band Wireless: Supports 2.4GHz (300Mbps) and 5GHz (900Mbps) for a total of 1200Mbps theoretical speed.
• עטלעכע אַפּערייטינג מאָדעס: Functions as a WiFi Router, WiFi Signal Repeater, WiFi AP Hotspot, and WiFi Bridge.
• עטהערנעט קאַנעקטיוויטי: Features one 10/100Mbps adaptive Ethernet port for wired connections.
• סמאַרט קאָאָלינג פאָכער: Integrated fan for automatic heat dissipation, enhancing device stability.
• ברייט וולtage Power Input: Operates on DC5V-24V (typical 12V/1A), with a 12V/1A power supply included.
• סאָליד פּלאַן: Mini industrial design suitable for various environments.
• Signal Strength Detection (SSA): Supports reporting of signal strength.
• Memory Hotspot Function: Automatically connects to up to 100 remembered hotspots.

Figure 2.1: VAP11AC highlighting its dual-band 1200Mbps capabilities.

3. סעטאַפּ גייד

3.1 פּעקל אינהאַלט

איידער איר גייט ווייטער, זיכערט זיך אז אלע זאכן זענען דא:

• VONETS VAP11AC Device
• 12V/1A Power Supply Adapter
• Ethernet Cable (approx. 30cm with RJ45 connector)
• Power Cable (approx. 30cm with DC and USB ports)

3.2 ערשט קאַנעקשאַן

1. Connect the power cable to the VAP11AC device's DC port.
2. Plug the 12V/1A power adapter into a power outlet and connect it to the power cable.
3. Wait for the device to power on. The LED indicators will illuminate.
4. For initial configuration, connect your computer to the VAP11AC device using the provided Ethernet cable. Alternatively, you can connect wirelessly to the VAP11AC's default WiFi network (SSID and password typically found on the device label or in the quick start guide).

3.3 Web צובינד אַקסעס

1. עפענען א web browser on your connected computer.
2. אַרייַן די פעליקייַט IP אַדרעס (למשל, 192.168.254.254) אין די אַדרעס באַר און דריק אויף Enter.
3. Log in using the default username and password (refer to the device label or quick start guide for credentials).
4. Once logged in, you can configure the device's operating mode and network settings.

Figure 3.1: VAP11AC with power and Ethernet connections.

4. אַפּערייטינג מאָדעס

The VAP11AC supports several operating modes to suit different networking requirements.

4.1 WiFi Bridge Mode

In Bridge mode, the VAP11AC converts a WiFi signal into a wired Ethernet connection. This is ideal for devices that only have an Ethernet port but need to connect to a wireless network, such as desktop computers, network printers, surveillance cameras, or DVRs.

1. אַקסעס די web interface and select Bridge mode.
2. Scan for available WiFi networks and select your desired network.
3. Enter the WiFi password if required.
4. Connect your wired device to the VAP11AC's Ethernet port.

Figure 4.1: VAP11AC in WiFi Bridge mode.

4.2 וויפי רעפּעאַטער מאָדע

Repeater mode extends the coverage of an existing WiFi network. The VAP11AC receives the wireless signal from your main router and re-broadcasts it, eliminating dead zones and improving signal strength in areas with weak coverage.

1. אַקסעס די web interface and select Repeater mode.
2. Scan for available WiFi networks and select the network you wish to extend.
3. Enter the WiFi password. The VAP11AC will then extend this network.

Figure 4.2: VAP11AC in WiFi Repeater mode and AP application.

4.3 WiFi Router Mode

In Router mode, the VAP11AC acts as a primary router, creating a new wireless network. This is suitable for scenarios where you have a wired internet connection (e.g., from a modem) and need to share it wirelessly with multiple devices.

1. אַקסעס די web interface and select Router mode.
2. Configure WAN settings (e.g., DHCP, Static IP, PPPoE) based on your internet service provider.
3. Set up your new WiFi network's SSID and password.
4. Connect your modem's Ethernet cable to the VAP11AC's Ethernet port.

Figure 4.3: VAP11AC in WiFi Router mode.

4.4 AP (Access Point) Mode

AP mode allows the VAP11AC to create a wireless network from an existing wired network. This is useful for adding WiFi capabilities to a wired-only network, such as in hotel rooms or offices.

1. אַקסעס די web interface and select AP mode.
2. Configure the SSID and password for the new wireless network.
3. Connect the VAP11AC's Ethernet port to your wired network.

פיגורע 4.4: איבערview of VAP11AC application modes.

5. וישאַלט

5.1 Smart Cooling Fan

The VAP11AC features a smart cooling fan designed to activate automatically after 5-10 minutes of normal operation to dissipate heat and ensure stable performance. The fan will also automatically shut down when cooling is no longer required.

This fan function can be configured manually via the web interface, allowing you to disable it, set it to automatic control, or periodic automatic control.

Figure 5.1: VAP11AC with smart cooling fan in operation.

5.2 אַלגעמיינע קער

• Keep the device in a well-ventilated area to assist with heat dissipation.
• ויסמיידן יקספּאָוזינג די מיטל צו עקסטרעם טעמפּעראַטורעס, הומידיטי אָדער דירעקט זונשייַן.
• Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners.
• מאַכן זיכער אַז אַלע קייבאַלז זענען סיקיורלי פארבונדן.

6. טראָובלעשאָאָטינג

6.1 דיווייס גייט נישט אן

• Verify the power adapter is correctly connected to the device and a working power outlet.
• Ensure the power adapter is the correct 12V/1A type provided with the device.

6.2 Unable to Access Web צובינד

• Confirm your computer is connected to the VAP11AC via Ethernet or its default WiFi network.
• Ensure your computer's IP settings are configured to obtain an IP address automatically (DHCP).
• Double-check the default IP address (192.168.254.254) אין אייער בלעטערער.
• פרובירט אויסצורייניגן אייער בלעטערער'ס קעש אדער ניצן אן אנדערן בלעטערער.
• If you have changed the device's IP address and forgotten it, perform a factory reset (see 6.5 Factory Reset).

6.3 קיין אינטערנעט פֿאַרבינדונג

• In Repeater or Bridge mode, ensure the VAP11AC is successfully connected to your main router's WiFi network and the password is correct.
• In Router mode, verify your WAN settings are correctly configured for your internet service provider.
• Check the status of your main router or modem.

6.4 איבערהיצונג זארגן

While the VAP11AC has a smart cooling fan, some users have reported the device becoming warm during extended use. Ensure the device is placed in an area with adequate airflow and that the fan vents are not obstructed. If overheating persists, consider adjusting the fan settings in the web interface or contacting support.

6.5 פאַבריק באַשטעטיק

צו צוריקשטעלן דעם אפאראט צו זיינע פאבריק פעליקייט סעטינגס:

1. With the device powered on, locate the Reset button (usually a small pinhole).
2. Use a paperclip or similar pointed object to press and hold the Reset button for approximately 5-10 seconds.
3. Release the button when the device's lights flash or it reboots.
4. The device will restart with factory default settings. You will need to reconfigure it.

7. ספּעסאַפאַקיישאַנז

Figure 7.1: VAP11AC product specification overview.

8. וואָראַנטי און שטיצן

For warranty information and technical support, please refer to the official VONETS webזייטל אדער קאָנטאַקט אייער הענדלער. האַלט אייער קויף קוויטל פֿאַר וואָראַנטי קליימז.

Official VONETS Webפּלאַץ: www.vonets.com (Note: This is a placeholder link, please verify the actual support webפּלאַץ.)