BRIKSMAX LED Lighting Kit for LEGO 75257 Millennium Falcon Instruction Manual

פּראָדוקט איבערview

This instruction manual provides detailed guidance for installing and operating the BRIKSMAX LED Lighting Kit designed specifically for the LEGO 75257 Millennium Falcon model. The kit enhances the visual appeal of your LEGO set by illuminating various sections with LED lights. Please note that the LEGO building blocks model set is not included with this lighting kit.

וואָס איז אַרייַנגערעכנט

The BRIKSMAX LED Lighting Kit for the LEGO 75257 Millennium Falcon includes the following components:

• Dot Lights (various colors and lengths)
• Expansion Boards (8-port and 6-port)
• קאַנעקטינג קאַבלעס
• Battery Holder (requires 3 AA batteries, not included)
• קלעפּיק סקווערז
• וסב מאַכט קאַבלע
• LEGO Plates (random colors, for integration)
• ינסטראַקשאַנז מאַנואַל

ינסטאַללאַטיאָן גייד

Follow these steps carefully to install your BRIKSMAX LED Lighting Kit. Patience and attention to detail are essential for a successful installation. It is recommended to refer to the detailed video instructions for visual guidance.

אַלגעמיינע ינסטאַללאַטיאָן איבערview

Detailed Installation Steps (Part 2)

This video focuses on specific steps for integrating the lighting components into your LEGO Millennium Falcon model. Pay close attention to wire routing and component placement.

Additional Product Showcase

Observe the final appearance of the illuminated model from various angles to understand the intended lighting effects.

וויכטיק באַטראַכטונגען:

• Handle wires and small components with care to prevent damage.
• Ensure all connections are secure before powering on the kit.
• Refer to the included printed instructions for step-by-step diagrams.

אַפּערייטינג ינסטראַקשאַנז

To operate your BRIKSMAX LED Lighting Kit:

1. Insert 3 AA batteries (not included) into the battery holder. Ensure correct polarity.
2. Connect the battery holder to the main expansion board.
3. Alternatively, connect the USB power cable to the main expansion board and a compatible USB power source (e.g., power bank, USB wall adapter).
4. The lights should illuminate once power is supplied. This kit does not include a remote control.

וישאַלט

כדי צו זיכער מאַכן די לאַנגלעבעדיקייט און אָפּטימאַלע פאָרשטעלונג פון דיין לייטינג קיט:

• Keep the kit clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the kit to excessive moisture or extreme temperatures.
• When not in use for extended periods, remove batteries from the battery holder to prevent leakage.
• Do not pull on the wires forcefully, as this can damage connections.

טראָובלעשאָאָטינג

If you encounter issues with your BRIKSMAX LED Lighting Kit, consider the following:

• ליכטער ברענען נישט אָן:
  • קאָנטראָלירט צי די באַטעריעס זענען ריכטיק אַרײַנגעשטעלט און האָבן גענוג אָפּצאָל.
  • Ensure all connecting cables are securely plugged into the expansion boards and lights.
  • Verify that the power source (battery holder or USB) is functioning correctly.
• פליקערנדיקע ליכטער:
  • Inspect connections for looseness.
  • Ensure wires are not pinched or damaged by LEGO bricks.
• Overheating or burning smell:
  • Immediately disconnect power. This indicates a short circuit or component malfunction. Recheck all wiring for proper insulation and connections. Contact customer support if the issue persists.

ספּעסאַפאַקיישאַנז

שטיצן

For any difficulties or questions regarding your BRIKSMAX LED Lighting Kit, please contact our customer support team. We are committed to providing assistance and ensuring your satisfaction.

You can typically find contact information on the product packaging or the official BRIKSMAX webפּלאַץ.