Weiser SmartCode 10 Traditional Z-Wave Electronic Lock (Model 9GED18000-028) User Manual

פּראָדוקט איבערview

The Weiser SmartCode 10 Traditional with Z-Wave Electronics is a robust electronic deadbolt designed for residential security. It integrates seamlessly with Z-Wave compatible home automation systems, offering enhanced control and convenience. This lock features a durable metal housing and the innovative SmartKey re-key technology.

שליסל פֿעיִקייטן:

• Electronic keypad operation with backlit numbers for night visibility.
• Manual key override for traditional access.
• Z-Wave 500 technology for wireless communication with security and home automation systems.
• Compatible with Amazon Alexa via Samsung SmartThings and/or Wink.
• SmartKey re-key technology allows re-keying the lock in seconds.
• Customizable automatic door locking after 30 seconds for peace of mind.
• Supports up to 30 user access codes and 1 master code.
• ANSI/BHMA Grade 2 certified and UL certified with a 20-minute fire rating.
• Designed for easy installation on most standard residential doors with just a screwdriver.

Image: Weiser SmartCode 10 Traditional Z-Wave Electronic Lock, showcasing the exterior keypad and brass finish.

סעטאַפּ און ינסטאַלירונג

The Weiser SmartCode 10 lock is designed for straightforward installation, typically requiring only a screwdriver. Follow these general steps for a successful setup:

1. Prepare Your Door

• Ensure your door is prepared for a standard deadbolt installation.
• Remove any existing deadbolt hardware.

2. אינסטאַלירן דעם לאַטש

• Insert the latch into the edge of the door. Ensure the latch bolt is facing the correct direction (beveled edge towards the door frame).
• באַזײַטיקט דעם לאַטש מיט די צוגעשטעלטע שרויפן.

3. ינסטאַלירן די עקסטעריאָר אַסעמבלי

• Feed the cable and spindle through the hole in the door.
• Position the exterior keypad assembly flush against the door.

4. Install the Interior Mounting Plate

• Attach the interior mounting plate to the door, aligning it with the exterior assembly.
• Secure it with screws, ensuring the cable is routed correctly and not pinched.

5. Connect the Cable and Install Interior Assembly

• פאַרבינדן די קאַבלע פון ​​די יקסטיריער פֿאַרזאַמלונג צו די ינלענדיש פֿאַרזאַמלונג.
• Attach the interior assembly to the mounting plate, ensuring the spindle engages with the turnpiece.
• Secure the interior assembly with screws.

6. אַרײַנשטעלן באַטעריעס

• The lock requires 4 AA batteries (purchased separately).
• Open the battery cover on the interior assembly and insert the batteries, observing polarity.
• נאָענט די באַטאַרייע דעקן.

7. Program User Codes

• Refer to the detailed programming instructions included with your lock to set your master code and individual user access codes.

8. SmartKey Re-keying (Optional)

• If you wish to re-key your lock to an existing Weiser key, use the SmartKey re-key tool and follow the instructions provided. This process takes seconds and requires three easy steps.

Operating Your SmartCode 10 Lock

לאַקינג די טיר

• פֿון חוץ: Press the "Lock" button on the keypad once. The deadbolt will extend automatically.
• פון די ינלענדיש: Turn the interior turnpiece to the vertical (locked) position.
• אָטאַמאַטיק לאַקינג: The lock can be configured to automatically lock after 30 seconds of inactivity, providing added security.

אַנלאַקינג די טיר

• ניצן אַ באַניצער קאָד: Enter your valid 4-8 digit user code on the keypad. The deadbolt will retract.
• ניצן אַ שליסל: Insert the physical key into the keyhole and turn it to unlock the deadbolt.
• ז-וועוו אינטעגראַציע: If connected to a compatible Z-Wave system (e.g., Samsung SmartThings, Wink), you can lock/unlock the door remotely via your smartphone or smart home interface.

Z-Wave Connectivity

The SmartCode 10 lock features Z-Wave technology, allowing it to communicate wirelessly with your home automation system. This enables remote control, status monitoring, and integration with other smart devices. Consult your Z-Wave hub's instructions for pairing the lock with your system.

וישאַלט

באַטערי פאַרבייַט

• The lock will provide a low battery warning (e.g., flashing light, audible beep).
• To replace batteries, remove the interior cover.
• Replace the 4 AA batteries with new alkaline batteries, ensuring correct polarity.
• Reattach the interior cover.

רייניקונג

• רייניקט די אויסערליכע זייט פון דעם שלאָס מיט אַ ווייכן, דamp cloth. Avoid abrasive cleaners or solvents that could damage the finish or keypad.

טראָובלעשאָאָטינג

• שלאָס ענטפֿערט ​​נישט: Check battery levels and replace if necessary. Ensure the interior assembly is properly seated.
• אומרעכטע קאָד איינגאַבע: If the lock flashes red or beeps negatively after entering a code, re-enter the code carefully. Verify the code is active.
• Mechanism Lag: In rare instances, the locking mechanism may lag. Ensure the door is properly aligned and the strike plate is correctly installed. If issues persist, re-calibrate the lock or contact support.
• Z-Wave קאָנעקטיוויטי פּראָבלעמען: Ensure your Z-Wave hub is powered on and within range. Re-attempt the pairing process if necessary.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

וואָראַנטי אינפֿאָרמאַציע

The Weiser SmartCode 10 Traditional Z-Wave Electronic Lock comes with a לעבנסלענג מעכאנישע און פיניש גאַראַנטיע, ensuring the durability and appearance of your lock. Additionally, it includes a One-Year Electronics Warranty covering any electronic components.

For specific warranty claims or details, please refer to the warranty documentation included with your product or visit the official Weiser webפּלאַץ.

קונה שטיצן

If you encounter any issues or have questions regarding your Weiser SmartCode 10 lock, please consult the comprehensive user guide provided in the product packaging. For further assistance, you may contact Weiser customer support through their official webזייטל אדער באשטימטע שטיצע קאנאלן.