1. פּראָדוקט איבערview
The Bytech 6FT LED Back Light Strip is designed to illuminate your hardware, providing vibrant multi-color lighting. This versatile LED strip is USB powered and controlled via a 24-key remote, offering 16 distinct colors and various lighting modes to enhance your viewing or gaming experience.
Image 1.1: Bytech 6FT LED Back Light Strip product and packaging.
2. זיכערקייַט אינפֿאָרמאַציע
- Ensure the power source is compatible with the USB power requirements of the LED strip.
- Do not expose the LED strip to water or excessive moisture as it is not water resistant. This product is intended for indoor use only.
- Avoid bending the LED strip sharply or applying excessive force, which may damage the internal circuitry.
- האַלטן אויס פון דערגרייכן פון קינדער.
- Do not attempt to disassemble or modify the product. This will void any potential warranty.
- Unplug the LED strip from the power source before cleaning or when not in use for extended periods.
3. פּעקל אינהאַלט
ביטע טשעק די פּאַקעט פֿאַר די פאלגענדע זאכן:
- 1 x Bytech 6FT LED Back Light Strip
- 1 x 24 שליסל רימאָוט קאָנטראָל
4. סעטאַפּ און ייַנמאָנטירונג
- צוגרייטן די ייבערפלאַך: זיכער מאַכן אַז די ייבערפלאַך וואו איר פּלאַנירט צו ינסטאַלירן די LED סטריפּ איז ריין, טרוקן און גלאַט. שטויב, שמוץ אָדער נעץ קענען אַפעקטירן די עפעקטיווקייט פון די קלעפּשטאָף.
- מאָס און פּלאַן: Before removing the adhesive backing, unroll the LED strip and temporarily position it to determine the best placement. The strip is 6 feet long.
- שאָלעכץ און שטעקן: Carefully peel off the protective backing from the adhesive tape on the back of the LED strip. Begin sticking the strip to your desired surface, pressing firmly along its length to ensure good adhesion.
- פאַרבינדן צו מאַכט: Locate the USB connector on the LED strip. Plug the USB connector into a compatible USB power source (e.g., a TV's USB port, a USB wall adapter, or a power bank).
- טעסט פאַנגקשאַנאַליטי: Once connected, the LED strip should light up. Use the remote control to test different colors and modes.
5. אַפּערייטינג ינסטרוקטיאָנס
The Bytech 6FT LED Back Light Strip is controlled using the included 24-key remote control. Ensure the remote has a clear line of sight to the LED strip's receiver.
רימאָוט קאָנטראָל פאַנגקשאַנז:
| קנעפּל | פֿונקציע |
|---|---|
| ON/OFF | Turns the LED strip on or off. |
| ברייטנאַס אַרויף/אַראָפּ | Adjusts the brightness level of the lights. |
| Color Selection Buttons | Directly select from 16 static colors (e.g., Red, Green, Blue, White, various shades). |
| בליץ | Activates a rapid flashing mode. |
| STROBE | Activates a slow strobe effect. |
| וועלקן | Cycles through colors with a smooth fading transition. |
| גלאַט | Provides a gradual transition between colors. |
באַמערקונג: The remote control requires a CR2025 button cell battery (not included). Please ensure the battery is inserted with the correct polarity.
6. וישאַלט און קער
- רייניקונג: To clean the LED strip, first unplug it from the power source. Use a soft, dry cloth to gently wipe away dust or dirt. Do not use liquid cleaners or abrasive materials.
- סטאָרידזש: If storing the LED strip for an extended period, ensure it is clean and dry. Coil it loosely to prevent damage to the strip or wiring. Store in a cool, dry place.
- קלעפּיק: The adhesive is designed for single application. Re-applying the strip multiple times may reduce its stickiness.
7. טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| די על-אי-די סטריפּ צינדט זיך נישט אָן. | No power, loose connection, remote battery dead/incorrectly inserted. | Ensure USB is securely plugged into a working power source. Check remote battery and polarity. |
| ווייַט קאָנטראָל נישט ארבעטן. | Remote battery dead, no line of sight to receiver, remote too far. | Replace remote battery. Ensure remote is pointed directly at the strip's receiver. Move closer to the strip. |
| ליכטער פליקערן אדער זענען נישט קאנסיסטענט. | Insufficient power, damaged strip. | Try a different USB power source with sufficient output. Inspect the strip for visible damage. |
| קלעבשטאָף קלעפּט זיך נישט. | Surface is dirty, oily, or textured; adhesive backing not fully removed. | Clean and dry the surface thoroughly before application. Ensure the protective film is completely removed. |
8. ספּעסאַפאַקיישאַנז
- מאָדעל: BYOPCA217BK
- סאָרט: בייטעק
- לענג: 6 פֿיס (אומגעפער 1.83 מעטער)
- ליכט מקור טיפּ: געפירט
- מאַכט מקור: יו-עס-בי (קאָרדעד עלעקטריש)
- קאָנטראָל אופֿן: 24-Key IR Remote Control
- קאלירן: 16 static colors + various dynamic modes
- דרינענדיק / דרויסנדיק באַניץ: דרינענדיק
- וואַסער קעגנשטעל מדרגה: ניט וואַסער קעגנשטעליק
- מאַטעריאַל: פּלאַסטיק
- נומער וואָג: 2.89 אונס (בעערעך 82 גראַמז)
- UPC: 805112051533
9. וואָראַנטי און שטיצן
Warranty information for the Bytech 6FT LED Back Light Strip is not explicitly provided in the product specifications. For detailed warranty terms, technical support, or customer service inquiries, please contact the manufacturer, DEEJAYLED, or your point of purchase.
You may find contact information on the product packaging or the manufacturer's official webפּלאַץ.
