1. פּראָדוקט איבערview
The AtlasIED E408-250 is a plate-mounted attenuator specifically designed for precise level control in masking and sound reinforcement systems. It features a 10-position, non-shorting rotary switch that allows for fine-tuning of audio levels. Each step of the rotary switch provides an attenuation rate of 1.5 dB, offering granular control over the sound output.
פיגורע 1: פראָנט view of the AtlasIED E408-250 attenuator, showing the rotary knob and numbered dial on a brushed metal plate.
2. סעטאַפּ און ייַנמאָנטירונג
Proper installation is crucial for the optimal performance of the E408-250 attenuator. This device is designed for plate mounting, typically into a standard electrical box or similar enclosure.
2.1 מאַונטינג
- Ensure the mounting surface is flat and secure.
- Align the attenuator plate with the mounting holes of the electrical box or bracket.
- Secure the plate using appropriate screws (not included). Do not overtighten.
2.2 וויירינג קאַנעקשאַנז
The E408-250 attenuator requires connection to your sound system's speaker lines. Refer to the wiring diagram below and on the unit itself for correct polarity and connection points. It is recommended to consult a qualified audio technician for installation if you are unfamiliar with audio wiring.
פיגורע 2: דערציען view of the attenuator, illustrating the transformer and the green terminal block where speaker wires are connected.
The attenuator typically connects in series with the speaker line. Ensure power to the amplifier is off before making any connections to prevent damage to the equipment or injury.
3. אַפּערייטינג ינסטרוקטיאָנס
The AtlasIED E408-250 features a simple rotary knob for adjusting the audio level. The knob has 10 distinct positions, labeled from 0 to 10, providing precise control over the attenuation.
- אַדזשאַסטינג לעוועל: Rotate the knob clockwise to increase the sound level (less attenuation) and counter-clockwise to decrease the sound level (more attenuation).
- Attenuation Rate: Each step of the rotary switch provides an attenuation of 1.5 dB. This allows for fine adjustments to achieve the desired sound level in your environment.
- Non-Shorting Design: The switch is designed to be non-shorting, meaning it will not create a short circuit when transitioning between positions.
- No Stop: The rotary switch does not have a physical stop at position 0 or 10, allowing for continuous rotation. However, the attenuation range is defined by the 0-10 scale.
פיגור 3: ווינקלדיק view of the attenuator, highlighting the rotary knob and the numbered faceplate for level adjustment.
4. וישאַלט
The AtlasIED E408-250 attenuator is designed for long-term, reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:
- רייניקונג: Use a soft, dry cloth to wipe the surface of the attenuator plate. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
- דורכקוק: Periodically inspect the wiring connections to ensure they are secure and free from corrosion.
- סוויווע: Ensure the attenuator is installed in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
5. טראָובלעשאָאָטינג
If you experience issues with your AtlasIED E408-250 attenuator, consider the following common troubleshooting steps:
- קיין געזונט אָדער נידעריק געזונט:
- Check all wiring connections to ensure they are secure and correctly terminated.
- Verify that the attenuator knob is not set to '0' (maximum attenuation).
- פאַרזיכערן די amplifier connected to the attenuator is powered on and functioning correctly.
- Confirm that the speakers are properly connected and operational.
- ינטערמיטאַנט געזונט:
- קאָנטראָלירט די וויירינג פֿאַר פרייַ קאַנעקשאַנז אָדער געשעדיגטע איזאָלאַציע.
- Ensure the attenuator knob is clean and free of debris that might interfere with its contact points.
- פאַרקרימט סאָונד:
- Verify that the attenuator is rated for the power output of your amplifier (E408-250 is 250W). Overpowering can cause distortion or damage.
- Check other components in the audio chain (amplifier, speakers) for issues.
If the problem persists after attempting these steps, contact Atlas Sound customer support or a qualified audio technician.
6. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל | E408-250 |
| טיפּ | Plate Mounted Attenuator |
| מאַכט רייטינג | 250 וו |
| Attenuation Steps | 10-position, non-shorting rotary switch |
| Attenuation Rate per Step | 1.5 דב |
| פּונקט וואָג | 1.75 פונט (0.79 קג) |
| פּראָדוקט דימענשאַנז | 5.05 X 5 X 4.1 אינטשעס (12.83 X 12.7 X 10.41 סענטימעטער) |
| ASIN | B07WS6RGCQ |
| ערשטער דאַטע בנימצא | 9 אפריל 2019 |
7. וואָראַנטי און שטיצן
For specific warranty information regarding your AtlasIED E408-250 attenuator, please refer to the documentation provided with your purchase or visit the official Atlas Sound webזייטל. גאַראַנטיע טערמינען און באדינגונגען קענען זיין אַנדערש.
For technical support, product inquiries, or service, please contact Atlas Sound directly:
- פאַבריקאַנט: אַטלאַס סאַונד
- Webפּלאַץ: www.atlassound.com (באַמערקונג: דאָס איז אַן אַלגעמיינע בייַשפּילample link, please verify the actual support URL.)
- קאָנטאַקט אינפֿאָרמאַציע: זעט די פאבריקאנט'ס website for the most current contact details, including phone numbers and email addresses for customer service.
