Avaya J100 Wireless Module (700512402) User Manual

1. הקדמה

The Avaya J100 Wireless Module (model 700512402) is an optional hardware accessory designed to enhance the connectivity of compatible Avaya J129, J179, and K155 IP Phones. This module provides seamless Wi-Fi and Bluetooth capabilities, allowing for greater flexibility in phone placement and headset usage.

This manual provides essential information for the proper installation, operation, and maintenance of your J100 Wireless Module. Please read these instructions carefully before proceeding with installation or use.

Image 1: Avaya J100 Wireless Module. This image displays the compact design of the module, showing its connectors and casing.

2. זיכערקייַט אינפֿאָרמאַציע

• Always disconnect the IP Phone from its power source before installing or removing the J100 Wireless Module.
• Handle the module with care to avoid damage to its electronic components.
• שטעלט נישט אויס דעם מאָדול צו פייכטקייט, עקסטרעמע טעמפּעראַטורן, אדער דירעקטער זונשייַן.
• Ensure proper ventilation around the IP Phone after installation.
• Only use the module with compatible Avaya IP Phones as specified.

3. פּעקל אינהאַלט

באַשטעטיקן אַז דיין פּעקל כּולל די פאלגענדע זאכן:

• Avaya J100 Wireless Module (700512402)
• Quick Start Guide or Documentation (if included)

If any items are missing or damaged, please contact your vendor or Avaya support.

4. סעטאַפּ און ייַנמאָנטירונג

Follow these steps to install the Avaya J100 Wireless Module into your compatible Avaya IP Phone:

1. Power Off Phone: Disconnect the power cable from your Avaya J129, J179, or K155 IP Phone.
2. געפינען מאָדול סלאָט: Identify the designated slot for the wireless module on the back or side of your IP Phone. This slot is typically covered by a removable panel.
3. אַראָפּנעמען דעקל: Carefully remove the cover panel from the module slot. This may involve gently prying it off or unscrewing a small screw, depending on your phone model.
4. אַרײַנשטעלן מאָדול: Align the Avaya J100 Wireless Module with the slot and gently insert it until it is fully seated. Ensure the connectors are properly aligned to avoid damage.
5. זיכערער מאָדול (אויב אָנווענדלעך): If your phone model requires it, secure the module with any screws that were removed from the cover panel.
6. פאַרבייַטן דעקל: Reattach the cover panel to the module slot.
7. Power On Phone: Reconnect the power cable to your IP Phone. The phone will power on and automatically detect the newly installed J100 Wireless Module.

Once the phone powers on, it should recognize the module, and you will be able to configure Wi-Fi and Bluetooth settings through the phone's menu.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1. ווי-פי קאַנעקטיוויטי

To connect your Avaya IP Phone to a Wi-Fi network:

1. Access the phone's menu and navigate to the "Settings" or "Network" options.
2. Select "Wi-Fi" or "Wireless Settings."
3. Enable Wi-Fi if it is not already active.
4. The phone will scan for available Wi-Fi networks. Select your desired network from the list.
5. Enter the Wi-Fi password (if required) using the phone's keypad.
6. Confirm the connection. The phone should now be connected to the Wi-Fi network.

5.2. בלועטאָאָטה קאַנעקטיוויטי

To pair a Bluetooth headset or other device with your Avaya IP Phone:

1. Ensure your Bluetooth device is in pairing mode (refer to your device's manual for instructions).
2. On your Avaya IP Phone, navigate to the "Settings" or "Bluetooth" menu.
3. Enable Bluetooth if it is not already active.
4. The phone will scan for nearby Bluetooth devices. Select your device from the list.
5. If prompted, enter the pairing code (usually "0000" or "1234" for headsets, or as specified by your device).
6. Confirm the pairing. Once paired, your Bluetooth device should be ready for use with the phone.

באַמערקונג: Some Bluetooth headsets may enter a power-saving mode when not in use, which could lead to a slight delay in call alerts. This is normal behavior for certain devices.

6. וישאַלט

• רייניקונג: Use a soft, dry cloth to clean the exterior of the module and the phone. Do not use liquid cleaners or aerosols.
• סטאָרידזש: If removing the module for extended periods, store it in a cool, dry place, away from direct sunlight and extreme temperatures.
• Firmware דערהייַנטיקונגען: Ensure your Avaya IP Phone's firmware is up to date, as this can improve module performance and compatibility. Refer to your phone's documentation or Avaya support for firmware update procedures.

7. טראָובלעשאָאָטינג

8. ספּעסאַפאַקיישאַנז

• מאָדעל נומער: 700512402
• סאָרט: אַווייַאַ
• קאַמפּאַטאַבאַל דעוויסעס: Avaya J129, Avaya J179, Avaya K155 IP Phones
• ייַזנוואַרג צובינד: Bluetooth, Ethernet (via phone connection)
• דאַטאַ לינק פּראָטאָקאָל: Bluetooth, Ethernet (via phone connection)
• דאַטאַ אַריבערפירן קורס: Up to 100 Megabits Per Second (via Ethernet, module provides wireless)
• נומער וואָג: בעערעך 1.13 אונסעס (32 גראַמז)
• פּעקל דימענשאַנז: בעערעך 4.96 X 3.11 X 1.73 אינטשעס
• ערשטער בנימצא: יולי 18, 2019

9. וואָראַנטי און שטיצן

For warranty information, please refer to the documentation provided with your original Avaya IP Phone or contact your authorized Avaya reseller. Avaya provides technical support for its products. For assistance, visit the official Avaya support webפּלאַץ אָדער קאָנטאַקט זייער קונה סערוויס אָפּטיילונג.

You can find more information and support resources on the official Avaya webפּלאַץ: www.avaya.com/support