oEdRo MAOA-0038

oEdRo Soft Tri-fold Truck Bed Tonneau Cover Instruction Manual

Model: MAOA-0038

הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your oEdRo Soft Tri-fold Truck Bed Tonneau Cover. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

קאַמפּאַטאַבילאַטי

This tonneau cover is compatible with the following truck models:

  • Dodge Ram 1500: 2002-2018
  • Ram 1500 Classic & New Body: 2019-2026
  • Dodge Ram 2500: 2003-2026
  • Dodge Ram 3500: 2003-2026

וויכטיק: This cover is designed for Fleet Side 6.4ft / 6.5ft beds only און איז not compatible with models equipped with RamBox or Split Tailgate.

To ensure proper fitment, measure your truck bed length before ordering. The measurement should be taken from the bulkhead to the tailgate, along the inside of the bed.

Diagram showing how to measure truck bed length from bulkhead to tailgate, indicating a 6.4ft bed length.

Image: How to measure your truck bed size. Ensure your bed measures approximately 6.4 feet from bulkhead to tailgate for proper fit.

Safety Information and Important Considerations

Please observe the following safety guidelines and considerations:

  • פאַרזיכערן אַלע קלamps and fasteners are securely tightened before driving. Regularly check for tightness.
  • Do not place heavy objects on the tonneau cover.
  • Always ensure the cover is properly latched or folded when the vehicle is in motion.
  • האַלט הענט און פינגער ווײַט פֿון באַוועגלעכע טיילן בעתן צוזאַמענפֿאַלטן און אויספֿאַלן.
  • Do not modify the tonneau cover or its components.

Incompatible Truck Bed Accessories

This tonneau cover is not suitable for installation on trucks with certain existing bed accessories. Please remove any of the following prior to installation:

  • Bed racks
  • מכשירים
  • Roll bars
  • Any other accessories that obstruct the bed rails or the area where the tonneau cover clamps זענען אינסטאַלירן.
Four images showing truck beds with various accessories like bed racks and toolboxes, marked with a red 'X' indicating incompatibility.

בילד: עקסamples of truck bed conditions not suitable for tonneau cover installation. Remove any obstructing accessories before proceeding.

פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:

  • oEdRo Soft Tri-fold Tonneau Cover Assembly (pre-assembled rails and cover)
  • מאָונטינג קלampס (פאר-אינסטאלירט אדער באזונדער)
  • Weather Strip (if included separately)
  • ינסטראַקשאַנז מאַנואַל
  • LED Light (included as an accessory)
Image of a truck bed with the tonneau cover installed, showing a small LED light illuminating the bed contents at night.

Image: A free LED light is included to illuminate your truck bed.

סעטאַפּ און ינסטאַלירונג

The oEdRo Soft Tri-fold Tonneau Cover is designed for easy, no-drill installation in most cases. Follow these steps for a smooth setup:

Step 1: Prepare the Truck Bed

  • Clean the truck bed rails thoroughly to ensure a good seal.
  • Remove any existing bed accessories that may interfere with the cover's installation (refer to the Safety Information section).
  • If your truck has a bed liner that extends over the bed rails, you may need to make small cuts to allow the clamps to secure properly. For bed liners under the bed rails, no cutting is typically required.

Step 2: Position the Tonneau Cover

  • Place the pre-assembled tonneau cover onto the front of your truck bed, near the bulkhead.
  • Ensure the cover is centered and flush with the bed rails.
Three sequential images demonstrating the installation process: 1. Placing the folded cover on the truck bed. 2. Unfolding the cover partially. 3. Fully unfolding and securing the cover.

Image: Visual guide for the no-drilling installation process. The cover is placed, unfolded, and then secured.

Step 3: Secure the Front Clamps

  • Locate the front clamps on the underside of the tonneau cover.
  • פאַרטשעפּען די קלamps under the truck bed rails and tighten them securely. Ensure a strong connection to stabilize the cover in its initial position.
Four close-up images showing features: Double Layer PVC material, strong connection point, weather strip installation, and security clamps.

Image: Details of the tonneau cover's construction and securing mechanisms. Top right shows a strong connection point for stability.

Step 4: Unfold and Secure the Rear Clamps

  • Carefully unfold the tonneau cover towards the tailgate.
  • Once fully extended, locate the rear security clamps.
  • Engage and tighten these clamps to the truck bed rails. These clamps ensure the tonneau cover stays put and provides a secure, snow-proof, and dust-proof trunk instantly.
Four close-up images showing features: Double Layer PVC material, strong connection point, weather strip installation, and security clamps.

Image: Bottom right shows the security clamps that hold the cover in place at the rear.

Step 5: Install Weather Strip (if separate)

  • If your weather strip is not pre-installed, apply it along the tailgate edge or other specified areas to prevent rain and snow from entering the truck bed.
Image of a red truck with the tonneau cover installed, showing water droplets on the cover and a close-up inset of the weather strip installation.

Image: The tonneau cover with an included weather strip ensures a perfect fit and protection against elements.

אַפּערייטינג ינסטראַקשאַנז

Opening the Tonneau Cover

  1. Release the rear security clamps by disengaging them from the truck bed rails.
  2. Fold the rear panel of the tonneau cover towards the front of the truck.
  3. Continue folding the middle panel over the front panel.
  4. Secure the folded cover using the integrated straps or buckles to prevent it from unfolding during transit.

Closing the Tonneau Cover

  1. Release the securing straps/buckles.
  2. Carefully unfold the front panel, then the middle panel, and finally the rear panel over the truck bed.
  3. Ensure the cover is properly aligned with the bed rails.
  4. Engage and tighten the rear security clamps to secure the cover in the closed position.

Proper operation ensures your cargo remains protected and can contribute to improved fuel efficiency.

Image of a red truck with the tonneau cover installed, showing airflow lines over the cover, indicating improved gas mileage.

Image: The aerodynamic design of the tonneau cover can improve gas mileage by up to 12%.

וישאַלט

To ensure the longevity and optimal performance of your oEdRo Tonneau Cover, follow these maintenance guidelines:

  • רייניקונג: Wash the tonneau cover regularly with mild soap and water. Use a soft brush or cloth. Rinse thoroughly and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
  • UV שוץ: The cover is made from double-layer PVC with UV protection. However, applying a UV protectant spray designed for vinyl or tonneau covers can further extend its life and prevent fading.
  • ייַזנוואַרג טשעק: Periodically inspect all clamps, hinges, and fasteners for tightness. Re-tighten as necessary to maintain a secure fit.
  • וועטער זיגל: Check the weather strip and seals for any signs of wear or damage. Replace if necessary to maintain water resistance.
  • סטאָרידזש: If removing the cover for extended periods, clean it thoroughly, ensure it is completely dry, and store it in a cool, dry place away from direct sunlight.

טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
דער דעקל פּאַסט נישט ריכטיק אָדער איז לויז.Incorrect bed size measurement; clamps not tightened; cover not centered.Verify truck bed dimensions. Re-center the cover. Ensure all front and rear clampס זענען סיקיורלי טייטאַנד.
וואַסער ליקאַדזש אין די טראָק בעט.Weather strip improperly installed or damaged; cover not fully sealed; tailgate gap.Check weather strip for proper placement and condition. Ensure the cover is fully closed and all clamps are tight. Consider adding a tailgate seal if leakage persists from the tailgate area.
Difficulty folding or unfolding the cover.Obstruction; cold weather affecting material flexibility.Check for any debris or objects obstructing the folding mechanism. In cold weather, the material may be stiffer; allow it to warm slightly if possible.
Clamps do not secure properly.Bed liner interference; clamps misaligned or damaged.Inspect for bed liner interference and trim if necessary. Ensure clamps are correctly aligned with the bed rails. Contact support if clamps appear damaged.

ספּעסאַפאַקיישאַנז

סאָרטoEdRo
מאָדעל נאָמעןSoft Tri-fold Bed Tonneau Cover
נומער מאָדעל נומערMAOA-0038
פּראָדוקט דימענשאַנז179.98 X 63.98 X 11 סענטימעטער (70.86 X 25.19 X 4.33 אינטשעס)
פּונקט וואָג13.6 קילאָגראַמס (29.98 לבס)
קאָלירשוואַרץ
מאַטעריאַלDouble Layer PVC Fabric
לאַק טיפּצוריק
סטיילSoft Tri-fold

וואָראַנטי און שטיצן

oEdRo products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official oEdRo webפּלאַץ.

If you encounter any issues or have questions regarding your tonneau cover, please contact oEdRo customer support. If the included LED light is broken upon receipt, contact us via Amazon message for an exchange.

קאָנטאַקט אינפֿאָרמאַציע: Refer to your purchase documentation or the oEdRo official webזייטל פֿאַר די מערסט אַקטועלע שטיצע קאָנטאַקט דעטאַלן.

פֿאַרבונדענע דאָקומענטן - MAOA-0038

Preview OEDRO Hard Quad Fold Tonneau Cover Installation Guide
Step-by-step installation guide for OEDRO Hard Quad Fold Tonneau Covers, compatible with Ford F-150 and Dodge Ram trucks. Includes part list, safety warnings, and folding instructions.
Preview OEDRO Hard Tri-Fold Tonneau Cover Assembly & Installation Guide
Comprehensive assembly and installation guide for OEDRO Hard Tri-Fold Tonneau Covers. Learn how to install your truck bed cover with step-by-step instructions, parts inventory, and important tips. Compatible with various truck models including Toyota Tacoma, Ford F-150, Dodge Ram, Chevy Silverado, and GMC Sierra.
Preview OEDRO Tri-Fold Hard Tonneau Cover with Tailgate Light Strip Assembly Instructions
Step-by-step guide for installing the OEDRO Tri-Fold Hard Tonneau Cover with Tailgate Light Strip on compatible pickup trucks. Includes parts list, warnings, and detailed instructions for assembly and wiring.
Preview OEDRO Running Boards Installation Guide for Dodge Ram Trucks
Detailed installation instructions and part list for OEDRO running boards and side steps, designed for Dodge Ram 1500, 2500, and 3500 models. Includes tools required, step-by-step procedures, and hardware specifications.
Preview OEDRO Under Seat Storage Box Installation Guide for Chevy Silverado & GMC Sierra
Learn how to install your OEDRO 2-in-1 Under Seat Storage Box in your Chevy Silverado or GMC Sierra Crew Cab with this easy-to-follow installation guide.
Preview OEDRO Wheel to Wheel Running Boards Installation Guide for 2019-2026 Dodge Ram 1500 Crew Cab
Detailed installation guide for OEDRO Wheel to Wheel Running Boards, compatible with 2019-2026 Dodge Ram 1500 New Body Crew Cab models. Includes tools required, preparation steps, step-by-step instructions, and a complete parts list.