RH Peterson Real Fyre G19A Series Foothill Oak Gas Log Set - 24 Inch Instruction Manual

1. הקדמה

This manual provides essential instructions for the safe and proper installation, operation, and maintenance of your RH Peterson Real Fyre G19A Series Foothill Oak Gas Log Set, model FTO-24. This product is designed to enhance the aesthetic appeal of your fireplace with realistic oak log aesthetics. Please read this manual thoroughly before attempting any installation or operation.

2. זיכערקייַט אינפֿאָרמאַציע

ווארענונג: ימפּראַפּער ייַנמאָנטירונג, אַדזשאַסטמאַנט, אָלטעריישאַן, דינסט אָדער וישאַלט קענען פאַרשאַפן שאָדן אָדער פאַרמאָג שעדיקן. אָפּשיקן צו דעם מאַנואַל. פֿאַר הילף אָדער נאָך אינפֿאָרמאַציע, באַראַטנ זיך אַ קוואַלאַפייד ינסטאַללער, סערוויס אַגענטור אָדער די גאַז סאַפּלייער.

• This gas log set must be installed by a qualified professional in accordance with all local codes and the National Fuel Gas Code ANSI Z223.1/NFPA 54.
• Ensure adequate ventilation in the area where the log set is installed.
• דו זאלסט נישט קראָם אָדער נוצן גאַזאָלין אָדער אנדערע ברענעוודיק וואַפּערז און ליקווידס אין דער געגנט פון דעם אָדער קיין אנדערע אַפּפּליאַנסע.
• האַלט קינדער און חיות אַוועק פון די הייסע אַפּאַראַט.
• Never burn solid fuels in a fireplace equipped with a gas log set.
• Always ensure the fireplace damper is fully open during operation.

3. פּעקל אינהאַלט

אייער פּעקל זאָל אַנטהאַלטן די פאלגענדע קאָמפּאָנענטן:

• Real Fyre Foothill Oak Gas Logs (various pieces)
• Lava Granules (for burner coverage)

באַמערקונג: The G19A Burner is required for operation and is sold separately. This log set is designed specifically for use with the G19A Burner.

4. סעטאַפּ און ייַנמאָנטירונג

Installation of the gas log set requires careful placement of the logs onto the compatible G19A burner. Refer to the G19A Burner instruction manual for detailed burner installation and gas connection procedures. Ensure the burner is correctly installed and tested before placing the logs.

1. Burner Placement: Position the G19A burner (sold separately) in your fireplace according to its specific instructions. Ensure all gas connections are secure and leak-tested by a qualified professional.
2. Lava Granules: Distribute the provided lava granules evenly over the burner pan, ensuring not to block any burner ports or pilot light assembly. The granules help create a realistic ember bed effect.
3. קלאָץ אָרט: Carefully arrange the Foothill Oak gas logs onto the burner grate. Follow the specific log stacking pattern provided in the G19A Burner manual or a diagram if available, to ensure proper flame distribution and prevent sooting. Incorrect log placement can affect performance and safety.
4. לעצט טשעק: After log placement, ensure no logs are directly blocking the pilot light or any burner ports. There should be adequate space for flames to develop naturally.

An image showing the Real Fyre G19A Series Foothill Oak Gas Log Set installed, with realistic flames emanating from the base, surrounded by dark lava rocks. This illustrates the typical appearance of the log set in operation.

5. אַפּערייטינג ינסטרוקטיאָנס

Refer to the G19A Burner instruction manual for specific lighting and operating procedures. General steps include:

1. איידער לייטינג: זיכער מאַכן אַז דער קאַמין דamper is fully open. Check for any obstructions in the fireplace or around the log set.
2. לייטינג די פּילאָט: Follow the instructions in your G19A burner manual to light the pilot light.
3. Igniting Main Burner: Once the pilot is lit, turn the main gas valve to the "ON" position. The main burner should ignite. Adjust the flame height as desired using the control knob.
4. אויסלעשן: To turn off, turn the main gas valve to the "OFF" position. The pilot light may remain lit, depending on your burner model. If you wish to turn off the pilot, follow the instructions in your burner manual.

וויכטיק: Never leave the appliance unattended while operating. Allow the log set to cool completely before handling.

6. וישאַלט

Regular maintenance ensures the longevity and safe operation of your gas log set.

• רייניקונג: Periodically, when the logs are completely cool, gently brush off any dust or soot accumulation. Use a soft brush; do not use abrasive cleaners or water directly on the logs.
• דורכקוק: Annually, or more frequently if used often, inspect the logs for any signs of cracking or deterioration. Inspect the burner and gas connections for leaks or damage.
• פאַכמאַן סערוויס: It is recommended to have your gas log set and burner inspected by a qualified service technician at least once a year.

7. טראָובלעשאָאָטינג

If you encounter issues, refer to the troubleshooting section of your G19A Burner manual first, as most operational problems relate to the burner system. Common issues related to the log set itself are rare but can include:

• Excessive Sooting: This can be caused by incorrect log placement, a dirty burner, or improper gas pressure. Review log placement according to the burner manual. Clean the burner if necessary. Consult a professional if the issue persists.
• Logs Appear Damaged: If logs show signs of significant cracking or breakage, they may need replacement. Contact RH Peterson customer support or your dealer.

For any issues not resolved by these steps, contact a qualified service technician.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי אינפֿאָרמאַציע

Specific warranty details for the RH Peterson Real Fyre G19A Series Foothill Oak Gas Log Set are not provided in this document. Please refer to the warranty information included with your G19A Burner or contact RH Peterson customer service or your authorized dealer for comprehensive warranty terms and conditions.

10. קונה שטיצן

For technical assistance, replacement parts, or further inquiries regarding your RH Peterson Real Fyre G19A Series Foothill Oak Gas Log Set, please contact your authorized RH Peterson dealer or visit the official RH Peterson website for customer service contact information. Always provide your model number (FTO-24) when seeking support.