1. הקדמה
This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.
2. וויכטיק סאַפעטי אינסטרוקציעס
- מאַכט מקור: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
- ווענטילאַטיאָן: זיכער מאַכן אַז עס איז דאָ גענוג ווענטילאַציע. נישט פֿאַרשטאָפּן די ווענטילאַציע עפענונגען.
- וואַסער און נעץ: Do not expose this appliance to rain or moisture. Do not place objects filled with liquids on the apparatus.
- סערוויס: איבערגעבן אלע סערוויסינג צו קוואַליפֿיצירטע סערוויס פּערסאָנעל. פּרוּווט נישט צו סערוויסן דעם פּראָדוקט אַליין.
- קאַבלעס: Use only high-quality, shielded cables for all audio connections to prevent interference.
- גראָונדינג: דעם פּראָדוקט מוזן זיין גראָונדעד.
- רייניקונג: ריין בלויז מיט אַ טרוקן שטאָף.
3. סעטאַפּ גייד
3.1 אַנפּאַקינג און דורכקוק
קערפאַלי אַנפּאַק די amplifier and inspect it for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 פּלייסמאַנט
The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 קאַנעקשאַנז
- מאַכט קשר: פֿאַרבינדט דעם צוגעשטעלטן AC מאַכט שנור צום amplifier's power inlet and then to a suitable grounded power outlet.
- אַרייַנשרייַב קאַנעקשאַנז: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
- רעזולטאַט קאַנעקשאַנז: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Figure 1: Front panel of the Behringer NX6000D Power Ampלײַפיער, ווײַזנדיק קאָנטראָלס און אַרויסווײַז.
פיגור 2: ווינקלדיק view of the Behringer NX6000D Power Amplifier, highlighting its compact design.
4. אַפּערייטינג ינסטרוקטיאָנס
4.1 פּאַוערינג אויף / אַוועק
Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.
4.2 פראָנט פּאַנעל קאָנטראָלס
- Level Controls (CH A, CH B): אַדזשאַסטירן די אַוטפּוט לעוועל פֿאַר יעדן קאַנאַל.
- SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
- LCD ווייַז: Shows current settings, DSP parameters, and status.
- SETUP קנעפּל: Accesses the main setup menu.
- PROCESS Button: Accesses DSP processing parameters.
- ענקאָדער קנופּ: Navigates menus and adjusts parameter values.
- EXIT קנעפּל: Returns to the previous menu or main screen.
4.3 DSP Functionality
The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:
- פאַרהאַלטן: Adjust signal delay for speaker alignment.
- קראָסאָוווער: Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
- EQ: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
- Dynamics Processing: Apply compression or limiting to control dynamic range.
- זיכערהייט סעטטינגס: Lock settings to prevent unauthorized changes.
Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.
5. וישאַלט
- רייניקונג: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- ווענטילאַטיאָן: קאָנטראָלירט רעגולער אַז די ווענטילאַציע עפענונגען זענען ריין פון שטויב און שמוץ.
- קאַבלע קאַנעקשאַנז: Periodically check all cable connections for secure fit and signs of wear.
- סטאָרידזש: If storing the unit for an extended period, ensure it is in a dry, dust-free environment.
6. טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| קיין מאַכט | Power cord disconnected; faulty outlet; internal fuse. | Check power cord connection; try a different outlet; contact service if fuse is suspected. |
| קיין געזונט רעזולטאַט | Input/output cables incorrect; level controls too low; protection mode active. | Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit). |
| פאַרקרימט געזונט | Input signal too high; speaker impedance mismatch; faulty speaker. | Reduce input signal level; verify speaker impedance matches amplifier; test with different speakers. |
| אַפּאַראַט אָוווערכיץ | פארשטאפטע ווענטילאציע; איבערגעטריבענע לאסט. | Ensure clear airflow around the unit; reduce output level or load. |
7. טעכניש ספּעסאַפאַקיישאַנז
- רעזולטאַט מאַכט: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
- וואָג: Less than 13.2 lbs / 6.0 kg
- דימענשאַנז (H x W x D): 3.7 X 19.02 X 12.44 אינטשעס (94 X 483 X 316 מם)
- דספּ: High-performance DSP with 24-bit/96 kHz converters
- DSP Features: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
- אַרייַנשרייַב קאַנעקטערז: 2 x XLR/TRS combo jacks
- רעזולטאַט קאַנעקטערז: 2 x SpeakON connectors
- מאַכט צושטעלן: Ultra-efficient switch-mode power supply
- קאָאָלינג: Revolutionary cool-running high-density Class-D technology
- מאַטעריאַל: מעטאַל
- קאָליר: שוואַרץ
8. וואָראַנטי און שטיצן
For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.
8.1 טעכניש שטיצן
If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.
בעהרינגער אפיציעל Webפּלאַץ: www.behringer.com
