1. פּראָדוקט איבערview
The VOLTCRAFT LWT-100 is a high-quality conductivity meter designed for rapid determination of conductivity, salinity, and Total Dissolved Solids (TDS) values in various liquids. Featuring a superior graphite measuring cell and IP67 water resistance, this device ensures accurate and reliable measurements in demanding environments.
פיגורע 1: פראָנט view of the LWT-100 Conductivity Meter. The device features a clear digital display showing conductivity and temperature readings, along with intuitive control buttons for navigation.
2. זיכערקייַט אינפֿאָרמאַציע
ביטע ליינט און פארשטייט אלע זיכערהייט אינסטרוקציעס איידער איר ניצט דעם אפאראט. אויב איר טוט דאס נישט, קען דאס פירן צו א שאדן אדער שאדן צום מעטער.
- Do not immerse the entire device in water beyond its IP67 rating. The measuring cell is designed for liquid contact, but the main body should be protected from excessive moisture.
- פֿאַרמײַדט צו לאָזן דאָס אַפּאַראַט פֿאַלן אָדער עס אויסשטעלן צו שווערע קלאַפּן.
- פרובירט נישט צו עפענען אדער פאררעכטן דעם אפאראט. לאָזט איבער אלע סערוויסעס צו קוואַליפֿיצירטע פּערסאָנעל.
- האַלטן אויס פון דערגרייכן פון קינדער.
- Clean the measuring cell carefully as described in the Maintenance section.
3. פּראָדוקט קאַמפּאָונאַנץ
The VOLTCRAFT LWT-100 package typically includes:
- 1 x VOLTCRAFT LWT-100 Conductivity Meter
- באַניצער מאַנואַל (דעם דאָקומענט)
פיגורע 2: צוריק view of the LWT-100 Conductivity Meter. The rear label provides essential product information, including the model name, measurement range, and serial number.
4. סעטאַפּ
The VOLTCRAFT LWT-100 is designed for immediate use. It operates on an internal power source and does not require user-replaceable batteries. Follow these steps for initial setup:
- אויספּאַקן: Carefully remove the meter from its packaging.
- ערשט דורכקוק: Check the device for any visible damage. If damaged, do not use and contact customer support.
- מאַכט אויף: Press the power button (usually indicated by a power symbol or a specific button on the front panel) to turn on the device. The display should illuminate.
- זעלבסט-טעסט: The device may perform a brief self-test upon startup. Wait for the display to show stable readings or a ready indicator.
5. אַפּערייטינג ינסטרוקטיאָנס
The LWT-100 allows for quick and accurate measurement of conductivity, salinity, and TDS. Ensure the measuring cell is clean before each use.
Figure 3: Close-up of the LWT-100 display. The screen clearly shows the measured conductivity in microSiemens (µS) and the corresponding temperature in degrees Celsius (°C).
5.1 מעאַסורינג
- צוגרייטן סampלאַ: זיכער מאַכן אַז די פליסיקייט איזample is at a stable temperature and free of large particles that could obstruct the sensor.
- Immerse Sensor: Carefully immerse the graphite measuring cell (located at the bottom of the device) into the liquid sample. Ensure the sensor is fully submerged and no air bubbles are trapped around it.
- לייענען ווייַז: Wait for the reading on the display to stabilize. The device will show the conductivity value (e.g., in µS/cm or mS/cm) and the temperature.
- רעקאָרד דאַטן: Note down the measured values as needed.
- ריין סענסער: After each measurement, rinse the measuring cell with distilled or deionized water to prevent contamination and residue buildup.
5.2 Changing Measurement Modes (if applicable)
The LWT-100 can measure conductivity, salinity, and TDS. Use the designated mode button (refer to the button labels on your device, typically indicated by an arrow or 'MODE' symbol) to cycle through the available measurement modes. The active mode will be indicated on the display.
6. וישאַלט
Proper maintenance ensures the longevity and accuracy of your VOLTCRAFT LWT-100.
- Cleaning the Measuring Cell: After each use, rinse the graphite measuring cell thoroughly with distilled or deionized water. For stubborn residues, gently wipe the electrodes with a soft, lint-free cloth. Do not use abrasive materials or harsh chemicals.
- רייניקונג די גוף פון די מיטל: ווישן די יקסטיריער פון די מיטל מיט אַ ווייך, דamp שטאָף. דו זאלסט נישט נוצן סאָלוואַנץ אָדער שטאַרק דיטערדזשאַנץ.
- סטאָרידזש: Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the measuring cell is clean and dry before storage.
- קאליבראציע: While the LWT-100 is designed for high accuracy, periodic calibration with known conductivity standards may be required for critical applications. Refer to specific calibration instructions if provided with your device or consult VOLTCRAFT support.
7. טראָובלעשאָאָטינג
If you encounter issues with your LWT-100, refer to the following common problems and solutions:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| די מיטל איז נישט קער אויף. | Internal power source depleted or fault. | Ensure the power button is pressed firmly. If the issue persists, contact customer support. |
| נישט פּינקטלעכע אָדער פלוקטויִרנדיקע לייענונגען. | Dirty measuring cell; air bubbles around sensor; sample contamination; sensor damage. | Clean the measuring cell thoroughly. Gently tap the device to dislodge air bubbles. Use a fresh, clean sample. If problem persists, sensor may be damaged; contact support. |
| די דיספּלעי ווייזט אַ טעות מעלדונג. | Out of range measurement; internal fault. | פאַרזיכערן די sample's conductivity is within the device's specified range. Turn the device off and on again. If the error persists, contact customer support. |
8. ספּעסאַפאַקיישאַנז
| שטריך | באַשרייַבונג |
|---|---|
| מאָדעל נומער | 1720718 (VC-8603590) |
| פאַבריקאַנט | VOLTCRAFT |
| דימענסיעס (L X W X H) | 2.8 X 5.4 X 10.8 סענטימעטער |
| וואָג | 200 גראַמז |
| ינגרעסס פּראַטעקשאַן (IP) שאַץ | IP67 (וואָטערפּרוף) |
| Measuring Cell Type | High-quality Graphite |
| מאַכט מקור | Internal (Manually Powered) |
| לאַנד פון אָריגין | דייטשלאנד |
9. שטיצע אינפֿאָרמאַציע
For technical support, warranty claims, or spare parts availability, please contact VOLTCRAFT customer service. Refer to the official VOLTCRAFT webוועבזייטל אדער אייער קויפן דאקומענטאציע פאר קאנטאקט דעטאלן.
פֿאַראַן רעזערוו טיילן: 1 יאָר.
