Geko G02032 Low Profile 2.5 Ton Garage Jack Instruction Manual

1. הקדמה

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Geko G02032 Low Profile 2.5 Ton Garage Jack. Please read and understand all instructions and safety warnings before using this product. Proper use and maintenance will ensure long-lasting performance and user safety.

2. זיכערקייַט אינפֿאָרמאַציע

Always prioritize safety when operating hydraulic lifting equipment. Failure to follow these instructions may result in property damage, personal injury, or death.

• לייענען דעם מאַנואַל: Understand all operating procedures and warnings before use.
• רייטאַד קאַפּאַציטעט: Never exceed the jack's rated capacity of 2.5 tons.
• ניצן אויף אַ שווערער, ​​גלייכער ייבערפלאַך: Always operate the jack on a hard, level surface capable of supporting the load. Avoid soft or uneven ground.
• ניצן דזשעק שטאַנדן: After lifting a vehicle, immediately support it with appropriate jack stands. The hydraulic jack is a lifting device only, not a vehicle support device.
• צענטרירן די לאַסט: Ensure the load is centered on the jack saddle. Off-center loads can cause instability.
• קלאָר אַרבעט געגנט: Keep the work area clean and well-lit. Keep bystanders away from the vehicle and jack during operation.
• דורכקוקן איידער נוצן: Before each use, inspect the jack for any damage, leaks, or loose parts. Do not use if damaged.
• Proper Lowering: Lower the load slowly and in a controlled manner.
• פערזענלעכע פּראַטעקטיוו עקוויפּמענט: Wear appropriate safety gear, such as safety glasses and gloves.
• ויסמיידן מאָדיפיקאַטיאָנס: Do not modify the jack or use it for purposes other than its intended design.

3. פּראָדוקט קאַמפּאָונאַנץ

Familiarize yourself with the main components of your Geko G02032 garage jack.

בילד 3.1: The Geko G02032 Low Profile 2.5 Ton Garage Jack, showcasing its full assembly with the handle attached. This image provides an overall view of the product's design and key features, including the low-profile chassis, lifting arm, saddle, and wheels.

בילד 3.2: The Geko G02032 garage jack with its operating handle detached, illustrating the two main components. This view helps in understanding the assembly process and the compact nature of the jack when stored.

בילד 3.3: אַ נאָענט-אַרויף view of the jack's saddle and the product label. The label displays important information such as the brand 'Geko', model 'G02032', and safety warnings, while the saddle is the contact point for lifting the vehicle.

בילד 3.4: A detailed shot of the product label on the Geko G02032 jack, highlighting the maximum lift capacity of 2.5 tons and the lifting height range of 80mm to 360mm. This information is crucial for safe operation.

בילד 3.5: A close-up of the handle attachment point on the Geko G02032 jack. This shows the mechanism where the two-piece handle connects to the hydraulic pump, enabling lifting and lowering operations.

בילד 3.6: א דיטיילד view of one of the swivel caster wheels on the Geko G02032 jack. These wheels allow for easy maneuverability and positioning of the jack under a vehicle.

בילד 3.7: A close-up of one of the fixed wheels located at the front of the Geko G02032 jack. These wheels provide stability and support during lifting operations.

בילד 3.8: א דיטיילד view of the hydraulic release valve mechanism on the Geko G02032 jack. This component is crucial for controlling the lowering speed of the jack.

בילד 3.9: An alternative close-up perspective of the hydraulic mechanism and pivot points of the Geko G02032 jack, showing the robust construction and connection points for the lifting arm.

4. סעטאַפּ

4.1 ערשטע פֿאַרזאַמלונג

1. צוטשעפּען די שעפּן: Insert the lower handle section into the handle socket on the jack. Align the holes and secure it with the provided pin or bolt. Then, attach the upper handle section to the lower section, ensuring it is firmly connected.

4.2 Bleeding the Hydraulic System

Air can become trapped in the hydraulic system during shipping or storage, affecting performance. Bleed the system before first use:

1. Turn the handle counter-clockwise to fully open the release valve.
2. Pump the handle vigorously 10-15 times to force any trapped air out of the system.
3. דרייען די שעפּן קלאַקווייז צו פאַרמאַכן די מעלדונג וואַלוו.
4. Test the jack by lifting it to its full height and then lowering it. Repeat if necessary until the jack operates smoothly.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1 ליפטינג אַ פאָרמיטל

1. צוגרייטן די פאָרמיטל: Park the vehicle on a hard, level surface. Engage the parking brake and block the wheels that will remain on the ground.
2. שטעלן די דזשאַק: Locate the manufacturer-recommended lifting points on the vehicle chassis. Position the jack so the saddle is directly under the lifting point.
3. שליסן אויסלאָז ווענטיל: Turn the handle clockwise until the release valve is fully closed.
4. הייבן דאָס אויטאָ: Pump the handle up and down to raise the vehicle to the desired height.
5. אינסטאַלירן דזשעק סטאַנדז: Immediately place appropriately rated jack stands under the vehicle's designated support points.
6. Lower onto Stands: Slowly turn the handle counter-clockwise to open the release valve and lower the vehicle onto the jack stands. Once the vehicle is securely resting on the stands, remove the hydraulic jack.

5.2 Lowering a Vehicle

1. אַ ביסל אויפהייבן: If the vehicle is on jack stands, position the jack under the lifting point and pump the handle a few times to slightly raise the vehicle off the jack stands.
2. אַראָפּנעמען דזשעק סטאַנדז: פֿאָרזיכטיק אַראָפּנעמען די דזשעק שטאַנדן פֿון אונטערן פֿאָרמיטל.
3. נידעריקער פאָרמיטל: Slowly turn the handle counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
4. אַראָפּנעמען דזשעק: Once the vehicle is fully lowered and resting on its wheels, remove the jack.

6. וישאַלט

Regular maintenance ensures the longevity and safe operation of your jack.

• שמירן: Periodically lubricate all moving parts, pivot points, and wheels with light machine oil.
• הידראַוליק פליסיק: Check the hydraulic fluid level every three months. To check, lower the jack completely, remove the oil filler plug, and ensure the fluid is level with the bottom of the filler hole. Use only high-quality hydraulic jack oil. Do not use brake fluid or motor oil.
• רייניקונג: האַלט דעם דזשעק ריין און פריי פון שמוץ, פעט און קעראָוסיוו מאַטעריאַלס.
• סטאָרידזש: האַלט די דזשעק אין אַ טרוקן, ריינעם אָרט מיטן ראַם גאָר צוריקגעצויגן צו פאַרמייַדן קעראָוזשאַן און פאַרלענגערן די לעבן פון די פּלאָמבע.
• דורכקוק: Regularly inspect for damage, wear, or leaks. Any damaged parts should be replaced by qualified personnel.

7. טראָובלעשאָאָטינג

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי אינפֿאָרמאַציע

This Geko G02032 Low Profile 2.5 Ton Garage Jack is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or contact Geko customer support. Keep your proof of purchase for warranty claims.

10. קונה שטיצן

For technical assistance, parts replacement, or any questions regarding your Geko G02032 garage jack, please contact Geko customer support. Refer to the product packaging or the official Geko webזייטל פֿאַר די מערסט אַקטועלע קאָנטאַקט אינפֿאָרמאַציע.