KERUI J008 Wireless Outdoor Strobe Siren

1. פּראָדוקט איבערview

The KERUI J008 is a wireless outdoor strobe siren designed to enhance the security of your premises. It features an intelligent microprocessor, a high-decibel siren, and a high-brightness LED flash light to provide an effective deterrent and alert system. This siren can operate as a standalone on-site alarm or integrate with other wireless accessories like remote controls, magnetic door contacts, and PIR detectors.

When integrated into an alarm system and armed, the J008 activates with both sound and light upon detection of a triggered sensor. Its robust design makes it suitable for outdoor installation, offering reliable performance in various environments.

פיגורע 1: פראָנט view of the KERUI J008 Wireless Outdoor Strobe Siren.

2. זיכערקייַט אינפֿאָרמאַציע

• פאַרזיכערן די מאַכט צושטעלן וואָלtage matches the product's specifications (110-240V).
• Do not open the siren casing unless instructed for maintenance. Refer to qualified personnel for repairs.
• האַלט דעם אַפּאַראַט אַוועק פון עקסטרעמע טעמפּעראַטורן, דירעקט זונשייַן און איבערגעטריבענע פייכטקייט.
• Install the siren securely to prevent it from falling.
• די סירענע גיט ארויס א הויכן קלאנג (110dB). פארמיידט פארלענגערטע אויסשטעלונג צו פארמיידן הערן שאדן.
• אַוועקוואַרפן באַטעריז לויט די היגע רעגיאַליישאַנז.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

• 1 x KERUI J008 Wireless Outdoor Flash Siren
• 1 x רימאָוט קאָנטראָל
• 1 x אי.יו. מאַכט אַדאַפּטער
• 3 X CR123A באַטעריז
• מאָנטירונג האַרדווער (שרויף, וואַנט פּלאַגז)

4. סעטאַפּ און ייַנמאָנטירונג

4.1 קאָמפּאָנענט לעגיטימאַציע

פיגורע 2: צוריק view of the J008 siren showing the power adapter interface, ON/OFF switch, SET button, 300mAh backup battery, and siren speaker.

• Power Adapter Interface: Connect the EU power adapter here.
• מאַכט באַשטימען אויף / אַוועק Controls the main power to the siren.
• SET קנעפּל: Used for pairing with wireless accessories.
• Backup Battery (300mAh): Provides power during outages.
• Siren Speaker: Emits the audible alarm.

4.2 Power Connection and Battery Installation

1. Ensure the Power ON/OFF switch is in the OFF position.
2. If not already installed, insert the 3 CR123A batteries into the designated battery compartment. Ensure correct polarity.
3. Connect the EU power adapter to the Power Adapter Interface on the back of the siren.
4. Plug the power adapter into a suitable 110-240V AC power outlet.
5. Switch the Power ON/OFF switch to the ON position. The siren will perform a self-test, and the LED indicator may flash.

The built-in Ni-MH rechargeable battery will automatically charge when the siren is connected to mains power and will provide backup power during power failures.

4.3 מאָנטירן די סירענע

The J008 siren is designed for wall mounting, suitable for both indoor and outdoor environments.

פיגורע 3: עקסamples of indoor and outdoor mounting, and a diagram illustrating the alarm system flow: sensor triggers, signal sent to control panel, control panel activates siren.

1. Choose a suitable location for mounting. For outdoor use, select a spot that provides good visibility for the strobe light and allows the siren sound to be heard effectively, while also being protected from direct heavy rain if possible.
2. Use the siren's back plate as a template to mark the drilling points on the wall.
3. באָערט לעכער און אַרײַנשטעקט וואַנט פּלאַגז אויב נייטיק.
4. Secure the siren to the wall using appropriate screws.
5. Ensure the siren is firmly attached and the power cable is routed safely.

4.4 Pairing with Wireless Accessories

The J008 siren is compatible with standard PT2262 encoding and millions of group detectors and remote controls. To pair a new accessory (e.g., remote control, door sensor, PIR detector):

1. דרוק די שטעלן button on the back of the siren. The siren will enter pairing mode, indicated by a specific light or sound cue (refer to specific accessory manual for exact cues).
2. Within a few seconds, trigger the accessory you wish to pair (e.g., press a button on the remote control, open a door with a door sensor, or trigger a PIR detector).
3. The siren will emit a confirmation sound or flash to indicate successful pairing.
4. Repeat for all additional accessories.
5. Exit pairing mode by pressing the שטעלן button again or waiting for a timeout.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1 אַרמינג און דיסאַרמינג

The J008 siren is typically armed and disarmed via a paired remote control or a connected alarm control panel.

• To Arm: Press the 'Arm' button on your remote control or activate the arm function on your alarm control panel. The siren may emit a confirmation beep.
• צו אַנטוואָפן: Press the 'Disarm' button on your remote control or deactivate the disarm function on your alarm control panel. The siren may emit a confirmation beep.

5.2 שרעק אַקטאַוויישאַן

When the system is armed and a paired detector (e.g., door sensor, motion detector) is triggered, the J008 siren will activate:

• It will emit a loud audible alarm at 110dB.
• The integrated LED flash light will activate, providing a visual deterrent and alert.

The alarm will continue for a preset duration or until the system is disarmed.

Figure 4: The J008 siren in active alarm state, highlighting its 110dB sound output, suitability for both indoor and outdoor use, and backup battery feature.

6. וישאַלט

6.1 באַטערי קער

• The J008 has a built-in Ni-MH rechargeable battery for backup power. Ensure the siren is regularly connected to mains power to keep this battery charged.
• The 3 CR123A batteries are typically for initial setup or specific functions. Check their status periodically. If the siren indicates low battery (e.g., through a specific flash pattern or sound), replace the CR123A batteries.
• When replacing batteries, ensure the siren is powered off and disconnect the main power adapter.

6.2 רייניקונג

Clean the exterior of the siren with a soft, damp שטאָף. ניצט נישט קיין שרײַבנדיקע רייניגערס אדער סאָלווענטן. זאָרגט אַז קיין פֿײַכטקייט זאָל נישט אַרײַנגיין אין דעם אַפּאַראַט.

7. טראָובלעשאָאָטינג

8. ספּעסאַפאַקיישאַנז

Figure 5: Detailed dimensions of the KERUI J008 siren.

9. וואָראַנטי און שטיצן

Specific warranty information for the KERUI J008 Wireless Outdoor Strobe Siren is not provided in the product details. Please refer to your purchase documentation or contact the retailer/manufacturer directly for warranty terms and customer support.

For technical assistance or further inquiries, please visit the official KERUI webפּלאַץ אָדער קאָנטאַקט זייער קונה סערוויס אָפּטיילונג.