הקדמה
The Orbit Pro Series 8-Pattern Thumb Control Hose Nozzle Sprayer is designed to provide versatile and efficient watering for various outdoor tasks. Its innovative thumb-control feature allows for effortless water flow adjustment, making it suitable for residential homeowners, professional contractors, and growers. This manual provides essential information for the proper setup, operation, and maintenance of your new hose nozzle.
פּראָדוקט איבערview
שליסל פֿעיִקייטן
- ENHANCE YOUR GARDENING EXPERIENCE - Our premium garden hose nozzle sprayer offers versatile spraying options for all your watering needs.
- ADJUSTABLE SPRAY PATTERNS - Easily switch between 7 different water patterns with our innovative rotating nozzle dial feature.
- DURABLE AND LONG-LASTING - Built with high-quality materials, our nozzle for hose ensures long-lasting performance in any watering system.
- גרינג צו נוצן און ריין - The user-friendly design of our water hose sprayer makes it simple to operate and easy to clean after use.
- VERSATILE SPRAY PATTERNS - From gentle showers to powerful jets, our spray hose nozzle provides a wide range of spray patterns for various tasks.
פּראָדוקט קאַמפּאָונאַנץ
סעטאַפּ
To set up your Orbit Pro Series Hose Nozzle, ensure your garden hose is equipped with a standard hose fitting. If your hose has a quick-connect fitting, ensure it is compatible with the nozzle's female hose thread inlet.
- Inspect Nozzle: Before first use, check the nozzle for any visible damage or debris in the inlet.
- פאַרבינדן צו האָסע: Screw the nozzle onto the end of your garden hose. Hand-tighten until secure. Avoid over-tightening, which can damage the threads or internal washer.
- טשעק פֿאַר ליקס: Turn on the water supply slowly. Check the connection point for any leaks. If a leak occurs, tighten slightly or ensure the rubber washer inside the nozzle's inlet is properly seated.
אַפּערייטינג ינסטראַקשאַנז
Thumb Control Operation
The Orbit Pro Series nozzle features an intuitive thumb control for water flow. Simply push the lever forward with your thumb to increase water flow, and pull it back to decrease or shut off the flow. This allows for precise control without needing to constantly return to the spigot.
אַדזשאַסטינג שפּריץ פּאַטטערנס
To change the spray pattern, rotate the oversized dial at the front of the nozzle. The dial is designed for easy grip, even with wet hands or gloves. Align the desired pattern (Jet, Shower, Full, H Sweep, V Sweep, Cone, Center, Mist) with the indicator mark on the nozzle body.
וישאַלט
Proper maintenance will extend the life of your Orbit hose nozzle.
- רייניקונג: Periodically clean the nozzle head to remove mineral deposits or debris that may affect spray patterns. Use a small brush or needle to clear any clogged holes.
- ווינטעריזאַטיאָן: Before freezing temperatures, disconnect the nozzle from the hose and drain any remaining water. Store the nozzle indoors in a dry, protected area to prevent damage from freezing.
- Washer Replacement: If leaks occur at the hose connection, check the rubber washer inside the nozzle. Replace it if it appears worn or cracked.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Water leaking from hose connection | Loose connection, worn/missing washer | Tighten connection; replace rubber washer. |
| Low water pressure/weak spray | Clogged nozzle head, low water supply pressure | Clean nozzle holes; check water supply. |
| שוועריקייט צו טוישן שפּריץ מוסטערן | Debris in dial mechanism, stiff mechanism | Rinse dial with water; apply silicone lubricant if needed. |
| Thumb control is stiff or stuck | Mineral buildup, internal wear | Flush with water; if persistent, contact support. |
ספּעסאַפאַקיישאַנז
- מאַטעריאַל: צינק
- סאָרט: אָרביט
- נומער דימענשאַנז (L x W x H): 2.6 X 5.75 X 5.25 אינטשעס
- עקסטעריאָר ענדיקן: מעטאַל
- ינלעט קאַנעקשאַן טיפּ: Female Hose Thread
- אָוטלעט קשר טיפּ: G Connector
- Valve טיפּע: פּילקע וואַלוו
- נומער וואָג: 13.7 אונסעס
- מאָדעל נומער: 26812
- גרייס: 8-מוסטער
- קאָליר: שוואַרץ
- סטייל: גראָבער פינגער קאָנטראָל
- מוסטער: 8-Pattern Pro
- UPC: 046878268128
וואָראַנטי און שטיצן
The Orbit Pro Series 8-Pattern Thumb Control Hose Nozzle Sprayer is designed for durability and long-lasting performance. Some users have reported a lifetime warranty for this product, indicating Orbit's commitment to quality.
For specific warranty claims, technical support, or replacement parts, please contact Orbit customer service directly. Refer to the product packaging or the official Orbit webזייטל פֿאַר די מערסט אַקטועלע קאָנטאַקט אינפֿאָרמאַציע.
אָנליין שטיצן: Visit the official Orbit webזייטל פֿאַר אָפֿט געשטעלטע פֿראַגעס, פּראָדוקט רעגיסטראַציע, און נאָך שטיצע רעסורסן.
קונה סערוויס: Contact Orbit customer service via phone or email for personalized assistance.
