StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

מאָדעל: RKCONS1901 | בראַנד: StarTech.com

1. הקדמה

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. וואָס איז אין דער קעסטל

  • KVM קאַנסאָול
  • 6 ft [1.8 m] KVM cable
  • מ 5 שטייַג ניסלעך
  • מ 5 סקרוז

3. סעטאַפּ און ייַנמאָנטירונג

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 געשטעל מאַונטינג

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 קאַנעקטינג קאַבלעס

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
דערציען view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

פיגורע 2: דערציען view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. אַפּערייטינג ינסטרוקטיאָנס

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 ניצן די קלאַוויאַטור און טאָוטשפּאַד

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 OSD מעניו נאַוויגאַציע

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. וישאַלט

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • רייניקונג: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • ווענטילאַטיאָן: Ensure proper airflow around the console. Do not block ventilation openings.
  • קאַבלע פאַרוואַלטונג: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • ינווייראַנמענאַל טנאָים: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. טראָובלעשאָאָטינג

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • קיין ווייַז: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • קלאַוויאַטור/מויז רעאַגירט נישט: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. ספּעסאַפאַקיישאַנז

שטריךבאַשרייַבונג
מאָדעל נומערRKCONS1901
סאָרטStarTech.com
געשטעל הייך1U
ווייַז גרייס19 אינטשעס
ווייַז טיפּActive Matrix TFT LCD
מאַקס האַכלאָטע1280x1024
קלאַוויאַטור99-key full keyboard with numeric keypad
פּוינטינג מיטלטאָוטשפּאַד
ווידעא צובינדVGA
וסב סופּפּאָרטיא
אַפּערייטינג טעמפּעראַטור0 ביז 40 גראַד צעלזיוס
MTBF50,000 שעה
פּראָדוקט דימענשאַנז (LxWxH)21 X 19 X 1.7 אינטשעס
פּונקט וואָג26.8 פונט

8. וואָראַנטי און שטיצן

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער קויף קוויטל פאר גאראנטיע טענות.

פֿאַרבונדענע דאָקומענטן - RKCONS1901

Preview StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD - User Manual
Detailed user manual for the StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD (models SV431DUSBU, SV831DUSBU, SV1631DUSBU). Learn about installation, operation, OSD features, specifications, and technical support.
Preview StarTech.com 8-Port Rackmount KVM Switch - 4K 60Hz User Manual
User manual for the StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH 8-Port Rackmount KVM Switch. Provides detailed instructions on installation, connecting consoles and PCs, and using hotkey commands for 4K 60Hz operation.
Preview StarTech.com 4/8/16 פּאָרט 1U רעק מאָונט USB VGA KVM סוויטש מיט OSD באַניצער מאַנואַל
די באַניצער מאַנואַל גיט דעטאַלירטע אינפֿאָרמאַציע וועגן די StarTech.com 4/8/16 פּאָרט 1U ראַק מאָונט USB VGA KVM סוויטש מיט OSD, אַרייַנגערעכנט ינסטאַלירונג, אָפּעראַציע, ספּעסיפיקאַציעס און טעכנישע שטיצע.
Preview StarTech.com SV441DUSBI / SV841DUSBI 4/8-פּאָרט פֿאַרבעסערטער דיגיטאַלער USB KVM סוויטש איבער IP מיט File אַריבערפירן באַניצער מאַנואַל
באַניצער מאַנואַל פֿאַר די StarTech.com SV441DUSBI און SV841DUSBI 4/8-פּאָרט ענהאַנסט דיגיטאַל USB KVM סוויטש איבער IP מיט File טראַנספער. לערנט וועגן אינסטאַלאַציע, קאָנפיגוראַציע, אָפּעראַציע, ווייַט פאַרוואַלטונג, און טראָובלעשווטינג.
Preview StarTech.com SV231DVIUDDM און SV431DVIUDDM: 2 און 4 פּאָרט DVI USB KVM סוויטש באַניצער מאַנואַל
באַניצער מאַנואַל פֿאַר StarTech.com SV231DVIUDDM (2-פּאָרט) און SV431DVIUDDM (4-פּאָרט) DVI USB KVM סוויטשיז מיט DDM. דעקט ינסטאַלירונג, אָפּעראַציע, ספּעסיפיקאַציעס, האָט-קנעפל פאַנגקשאַנז, טעכנישע שטיצע, און וואָראַנטי אינפֿאָרמאַציע.
Preview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U Adjustable High Load Fixed Rackmount Shelf - Installation and Specifications
Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.