1. הקדמה און פּראָדוקט איבערview
This manual provides essential information for the safe assembly, operation, and maintenance of your Yaheetech Horizontal Barbell Bumper Plate Rack Holder. This rack is designed to organize and store Olympic-sized barbell bumper plates and Olympic bars, featuring a mobile design with wheels and a handle for convenient relocation.
בילד 1: אינגאנצן view of the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.
שליסל פֿעיִקייטן:
- מידות: 37 x 13 x 11 inches (LxWxH).
- מאַקס. קאַפּאַציטעט: 300 Lb (136 kg).
- מאַטעריאַל: Powder-coated steel frame for resistance to sweat, moisture, and rust.
- Plate Slots: Includes 4 slots, each approximately 5.5 inches wide, to accommodate various bumper plate sizes.
- מאָביליטי: Equipped with two 2.6-inch diameter rolling wheels and a sweat-resistant handle for easy movement.
- Bar Holders: Two vertical holders for Olympic bars.
2. זיכערקייַט אינפֿאָרמאַציע
ביטע ליינט און פארשטייט אלע זיכערהייט אינסטרוקציעס איידער איר צוזאמענשטעלט אדער ניצט דעם פראדוקט. נישט נאכפאלגן די אינסטרוקציעס קען רעזולטירן אין שאָדן אדער שאדן צום פראדוקט.
- וואָג לימיט: Do not exceed the maximum weight capacity of 300 Lb (136 kg). Overloading can cause structural failure and injury.
- פֿאַרזאַמלונג: Ensure all bolts, nuts, and components are securely tightened before use. Periodically check for tightness.
- סטאַביל ייבערפלאַך: שטעלט שטענדיק דעם געשטעל אויף א פלאכער, סטאַבילער און גלייכער ייבערפלאַך כדי צו פאַרמייַדן עס צו איבערקערן.
- קינדער און פּעץ: האַלט קינדער און חיות אַוועק פון די געשטעל בעת די צוזאַמענשטעלונג און באַניץ.
- באַוועגן דעם געשטעל: When moving the rack, ensure plates and bars are securely seated. Use the handle and wheels for controlled movement. Avoid sudden stops or turns when heavily loaded.
- דורכקוק: Before each use, inspect the rack for any signs of damage, loose parts, or wear. Do not use if damaged.
- געהעריק לאָודינג: Distribute weight evenly across the plate slots to maintain balance and stability.
3. פּעקל אינהאַלט
וועריפיצירט אז אלע קאמפאנענטן זענען פאראן איידער איר הייבט אן צוזאמענשטעלן. אויב עפעס טיילן פעלן אדער זענען געשעדיגט, קאנטאקטירט קאסטומער סופארט.
- הויפּט ראַם (1)
- Plate Dividers (4)
- Vertical Bar Holders (2)
- שעפּן פֿאַרזאַמלונג (1)
- רעדער (2)
- האַרדווער פּאַק (באָלץ, וואַשערס, ניסלעך, שליסלען)
4. אַסעמבלי אינסטרוקציעס
Follow these steps carefully to assemble your barbell bumper plate rack.
- אָפּלייגן קאַמפּאָונאַנץ: נעמט פֿאָרזיכטיק אַרויס אַלע טיילן פֿון דער פּאַקעט און לייגט זיי אויס אויף אַ ריינער, גלאַטער ייבערפֿלאַך. קאָנטראָלירט די ליסטע פֿון אינהאַלט פֿון דער פּאַקעט.
- צוטשעפּען ווהעעלס: Secure the two wheels to the designated points on one end of the main frame using the provided bolts and wrenches. Ensure they are firmly attached and can rotate freely.
- ינסטאַלירן שעפּן: Attach the handle assembly to the opposite end of the main frame. Align the holes and secure with the appropriate bolts, washers, and nuts. Tighten securely.
- Insert Plate Dividers: Slide the four plate dividers into their respective slots on the main frame. These should fit snugly to create the plate storage sections.
- Mount Bar Holders: Attach the two vertical bar holders to the main frame, typically near the wheeled end. Secure them with the provided hardware.
- לעצט טשעק: Once all components are assembled, double-check all bolts and nuts to ensure they are fully tightened. Gently rock the rack to confirm stability.
בילד 2: נאָענט־אַרויף view of the rack's handle, designed for comfortable grip during movement.
Image 3: Detail of the vertical Olympic bar holders and one of the rolling wheels.
5. אַפּערייטינג ינסטרוקטיאָנס
This section details how to properly load and move your Yaheetech Barbell Bumper Plate Rack.
- Loading Plates: Carefully place bumper plates into the designated slots. It is recommended to load heavier plates towards the center or bottom of the rack for better stability. Distribute weight as evenly as possible across the four slots.
- Storing Bars: Insert Olympic barbells vertically into the two bar holders. Ensure the bars are fully seated and stable.
- באַוועגן דעם געשטעל: To move the rack, grasp the handle firmly. Tilt the rack slightly to engage the wheels, lifting the non-wheeled end off the ground. Roll the rack to your desired location. Avoid dragging the rack without using the wheels.
- אָרט: Always position the rack on a flat, stable surface away from high-traffic areas to prevent accidental tipping.
Image 4: The rack fully loaded with bumper plates and barbells, showcasinג זיין סטאָרידזש קאַפּאַציטעט.
Image 5: A closer look at bumper plates neatly organized within the rack's slots.
6. וישאַלט
Regular maintenance ensures the longevity and safe operation of your plate rack.
- רייניקונג: ווישט אַראָפּ דעם שטאָל ראַם מיט אַדamp cloth to remove dust and sweat. Avoid abrasive cleaners that could damage the powder coating.
- ייַזנוואַרג טשעק: Periodically (e.g., monthly) inspect all bolts, nuts, and connections. Tighten any loose hardware to maintain structural integrity.
- Wheel Inspection: Check the wheels for any debris or damage that might impede smooth rolling. Clean as necessary.
- פאַרהיטונג פון זשאַווער: The powder-coated steel is resistant to rust, but prolonged exposure to high humidity or moisture should be avoided. If scratches occur, touch up with rust-inhibiting paint.
7. טראָובלעשאָאָטינג
This section addresses common issues you might encounter with your plate rack.
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Rack feels unstable or wobbly | Loose hardware; uneven weight distribution; uneven floor surface. | Tighten all bolts and nuts. Redistribute plates evenly. Move rack to a level surface. |
| די רעדער דרייען זיך נישט גלאט | Debris in wheel mechanism; damaged wheel. | Clean wheels and axles. Inspect for damage; replace if necessary. |
| Difficulty moving the rack when loaded | Overloaded; wheels not fully engaged; rough surface. | Reduce weight if exceeding capacity. Ensure rack is tilted to engage wheels. Move on a smoother surface. |
8. ספּעסאַפאַקיישאַנז
Detailed technical specifications for the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.
Image 6: Dimensional diagram of the plate rack, illustrating key measurements.
| באַשרייַבונג | דעטאַל |
|---|---|
| מאָדעל נומער | YT-00073058 |
| סאָרט | יאעטעטש |
| פּראָדוקט דימענשאַנז (LxWxH) | 37 X 13 X 11 אינטשעס (93.98 X 33.02 X 29.97 סענטימעטער) |
| פּונקט וואָג | 7.7 ק"ג (אומגעפער 17 פונט) |
| מאַקסימום וואָג קאַפּאַציטעט | 300 לב (136 קג) |
| מאַטעריאַל | Powder-coated Steel Frame, Plastic Iron Alloy Steel |
| Number of Plate Racks | 4 |
| ראָד דיאַמעטער | 2.6 אינטשעס |
| קאָליר | שוואַרץ |
9. וואָראַנטי און שטיצן
Yaheetech products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Yaheetech webפּלאַץ.
If you have any questions, require technical assistance, or need to report missing/damaged parts, please contact Yaheetech customer support through the retailer where the product was purchased or via the contact information provided on the official Yaheetech webפּלאַץ.
- אָנליין שטיצן: באַזוכן www.yaheetech.shop (or your regional Yaheetech website) for FAQs and contact options.
- קונה סערוויס: Refer to your purchase receipt or product packaging for direct customer service contact details.
