DieHard 71687 950 Peak Amp Jump Starter, Portable Power Source, and Air Compressor User Manual

1. הקדמה

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your DieHard 71687 950 Peak Amp Jump Starter, Portable Power Source, and Air Compressor. This versatile unit is designed to provide emergency jump-starting power, portable 12V DC and USB power, and air compression for various inflation needs. Please read this manual thoroughly before first use and retain it for future reference.

פּראָדוקט איבערview

פיגורע 1: פראָנט view of the DieHard 71687 unit, showcasing its main controls and features including the jump start switch, internal battery status indicators, USB and 12V power ports, and the integrated air compressor hose.

The DieHard 71687 unit combines multiple functionalities into one portable device:

• 950 שפּיץ Amp שפּרונג סטאַרטער: Provides sufficient power for emergency vehicle jump-starts.
• Portable Power Source: Features a 2.1A USB power port and two 12V DC power outlets for charging and powering various electronic devices.
• 150 PSI לופט קאמפרעסאר: Equipped with a pressure gauge and nozzles for inflating tires, sports equipment, and other inflatables.
• געבויט-אין פלאַשליגהט: פֿאַר באַלויכטונג אין נידעריק-ליכט באדינגונגען.

וואָס איז אין די קעסטל

ביים אויספּאַקן, זיכער מאַכן אַז אַלע די פאלגענדע זאכן זענען פאַראַן:

• DieHard portable power unit with integrated cables and compressor hose
• Hose adapter end unit
• 3-piece hose adapter device end set
• Compressor accessory bag
• באַזיצער ס מאַנואַל (דעם דאָקומענט)

2. זיכערקייַט אינפֿאָרמאַציע

Read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

• פערזענליכע זיכערקייט: Always wear eye protection and protective clothing when working with batteries. Do not touch your eyes while working near a battery.
• ווענטילאַטיאָן: Work in a well-ventilated area. Batteries can produce explosive gases.
• ברענעוודיק מאַטעריאַלס: Keep sparks, flames, and smoking materials away from the unit and batteries.
• באַטערי קשר: קאָננעקט און דיסקאַנעקט דק רעזולטאַט קלamps only after setting the jump starter switch to the OFF position.
• אַפּאַראַט אָרט: Do not place the jump starter directly above the battery being jumped. Position the cables to prevent damage by moving engine parts.
• קינדער און פּעץ: האַלטן די אַפּאַראַט אויס פון דערגרייכן פון קינדער און פּעץ.
• טשאַרדזשינג: Recharge the unit only with the specified charger. Do not overcharge.
• לופט קאַמפּרעסער: Do not operate the air compressor continuously for more than 10 minutes to prevent overheating. Allow it to cool down before further use.
• פליסיק ויסשטעלן: דו זאלסט נישט ויסשטעלן די אַפּאַראַט צו רעגן אָדער נאַס טנאָים.

3. אויפשטעלן און ערשטע אויפלאדונג

Before using your DieHard 71687 unit for the first time, it is essential to fully charge its internal battery. This ensures optimal performance and extends battery life.

ערשט טשאַרדזשינג פּראָצעדור

1. Ensure the unit's main power switch (if present) is in the "OFF" position.
2. Locate the AC charging port on the unit.
3. Plug the AC charging cable into the unit's charging port, then plug the other end into a standard 120V AC wall outlet.
4. The "CHARGE" indicator light on the control panel will illuminate, indicating that the unit is charging. Refer to the internal battery status indicators for charge level.
5. Allow the unit to charge until the "100% - 70%" indicator light is solid green, indicating a full charge. This may take several hours.
6. Once fully charged, disconnect the AC charging cable from the wall outlet and then from the unit.

פיגורע 2: נאָענט-אַרויף view of the DieHard 71687 control panel, highlighting the "INTERNAL BATTERY STATUS" section with LED indicators for charge levels (100%-70%, 70%-30%, and below 30%). The "CHARGE" indicator is also visible.

It is recommended to fully charge the unit after each use and at least every three months to maintain battery health, even if not used.

4. אַפּערייטינג ינסטרוקטיאָנס

4.1. אָנהייבן אַ פאָרמיטל

Use this feature to jump-start 12V lead-acid batteries in cars, trucks, SUVs, and other vehicles.

1. Ensure the DieHard unit is fully charged.
2. Turn off the ignition of the vehicle to be jump-started and ensure all accessories (lights, radio, etc.) are off.
3. Place the DieHard unit on a flat, stable surface near the vehicle's battery, ensuring it is not directly above the battery.
4. פאַרבינדן די רויט positive (+) קלamp צום פּאָזיטיוון (+) טערמינאַל פֿון דער באַטעריע פֿונעם פֿאָרמיטל.
5. פאַרבינדן די שוואַרץ נעגאַטיוו (-) קלamp to a non-moving metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect it directly to the negative battery terminal.
6. Set the "JUMP START" switch on the DieHard unit to the "ON" position.
7. Attempt to start the vehicle. If it does not start immediately, wait a few minutes before trying again. Do not crank the engine for more than 5 seconds per attempt.
8. Once the vehicle starts, immediately set the "JUMP START" switch on the DieHard unit to the "OFF" position.
9. דיסקאַנעקט די שוואַרץ נעגאַטיוו (-) קלamp first, then disconnect the רויט positive (+) קלamp.
10. סטאָר די קלamps securely in their designated holders on the unit.

פיגורע 3: דערציען view of the DieHard 71687 unit, showing the integrated red positive and black negative jump starter clamps, along with the air compressor hose and various inflation nozzles stored on the unit.

4.2. Using the USB and 12V DC Power Ports

The DieHard 71687 provides portable power for various electronic devices.

• USB Power Port (2.1A): Ideal for charging smartphones, tablets, and other USB-powered devices.
  1. Press the "USB ON/OFF" button to activate the USB port. The USB indicator light will illuminate.
  2. Connect your device's USB charging cable to the unit's USB port.
  3. When finished, press the "USB ON/OFF" button again to turn off the USB port.
• 12V DC Power Outlets (x2): Suitable for powering 12V DC appliances up to 36 hours, such as portable coolers, fans, or other automotive accessories.
  1. Plug your 12V DC appliance into one of the 12V DC outlets.
  2. Ensure the appliance's power switch is on (if applicable).
  3. The 12V DC outlets are always active when the unit has sufficient charge.

Figure 4: The DieHard 71687 unit positioned in a truck bed, actively charging a tablet via its USB port, demonstrating its portable power capabilities for electronic devices.

4.3. ניצן דעם לופט קאמפרעסאר

The integrated 150 PSI air compressor can inflate vehicle tires, bicycle tires, sports balls, and other inflatables.

1. Ensure the DieHard unit is fully charged.
2. Uncoil the air compressor hose from its storage compartment.
3. Select the appropriate nozzle adapter from the accessory bag for the item you wish to inflate. Attach it securely to the compressor hose valve.
4. Connect the hose to the item to be inflated. For tires, screw the hose valve onto the tire's valve stem.
5. Turn the "AIR COMPRESSOR" switch (if present, or main power switch) to the "ON" position.
6. Monitor the pressure gauge on the unit and inflate to the recommended pressure.
7. Once the desired pressure is reached, turn the air compressor switch to "OFF".
8. Disconnect the hose from the item and store the hose and adapters.

Figure 5: A user kneeling beside a vehicle, using the DieHard 71687 unit's integrated air compressor to inflate a car tire, demonstrating its practical application for tire maintenance.

וויכטיק: Do not operate the air compressor for more than 10 consecutive minutes. Allow it to cool for at least 10 minutes before resuming operation to prevent damage from overheating.

5. וישאַלט

Proper maintenance ensures the longevity and reliable performance of your DieHard 71687 unit.

• ריטשאַרדזשינג: Recharge the unit immediately after each use. If not used, recharge every three months to keep the internal battery fully charged. This prevents battery damage and extends its lifespan.
• רייניקונג: Clean the unit's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• סטאָרידזש: Store the unit in a cool, dry place, away from direct sunlight, moisture, and corrosive materials. Ensure the jump starter clamps are securely stored in their holders to prevent accidental contact.
• באַטערי פאַרבייַט: The internal sealed lead-acid AGM battery is not user-replaceable. Contact qualified service personnel for battery replacement if necessary.

6. טראָובלעשאָאָטינג

This section addresses common issues you might encounter with your DieHard 71687 unit.

For issues not covered in this section, please refer to the Warranty and Support section for assistance.

7. ספּעסאַפאַקיישאַנז

Key technical specifications for the DieHard 71687 unit:

• מאָדעל: 71687
• שפּיץ Ampאַרויסרופן: 950 Amps
• באַטערי טיפּ: Sealed Lead-Acid AGM
• USB רעזולטאַט: 2.1 א
• DC Power Outlets: Two 12V DC outlets
• לופט קאַמפּרעסער: מאַקסימום 150 PSI
• קאַבלעס: 8-gauge, 24-inch with color-coded clamps
• דימענסיעס: בעערעך 10.63 X 11.5 X 11.75 אינטשעס
• וואָג: בעערעך 12.3 פונט
• פאַבריקאַנט: Schumacher Electric Corp.

8. וואָראַנטי און שטיצן

For warranty information, technical support, or service inquiries regarding your DieHard 71687 unit, please refer to the warranty card included with your product or visit the official DieHard website. You may also contact Schumacher Electric Corp., the manufacturer, directly for assistance.

ביטע האַלט אייער מאָדעל נומער (71687) און קויף דאַטע גרייט ווען איר קאָנטאַקטירט שטיצע.