SW-Motech STP.08.868.10000/B Sturzpad Kit Instruction Manual

1. פּראָדוקט איבערview

The SW-Motech STP.08.868.10000/B Sturzpad Kit is designed to provide additional protection for the frame, engine, and fairing of Kawasaki Z900 (2016) and Z900RS (2017) motorcycles. These crash pads feature CNC-milled, metal-free abrasive pads made from durable polyamide, engineered to reduce potential damage during a fall. The optimized surface is designed to offer a better gliding effect compared to traditional crash pads.

2. זיכערקייַט אינפֿאָרמאַציע

• Always ensure the motorcycle is stable and securely supported before beginning installation.
• טראָגט פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט (PPE) בעת דער אינסטאַלאַציע.
• אויב איר זענט נישט זיכער וועגן קיין שריט פון די ינסטאַלירונג פּראָצעס, באַראַטן זיך מיט אַ קוואַליפֿיצירטן מאָטאָציקל מעכאַניקער.
• Ensure all fasteners are tightened to the manufacturer's specified torque values. Over-tightening or under-tightening can lead to component failure.
• האַלט אַלע טיילן און מכשירים אַוועק פון קינדער און חיות.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:

• 2 x Sturzpads (for left and right side)
• Mounting material (fasteners, spacers, etc.)
• מאָנטירונג אינסטרוקציעס (דאָס דאָקומענט)

4. ינסטאַלירונג אינסטרוקציעס

The Sturzpad kit is designed for quick and easy assembly, utilizing original attachment points on the motorcycle frame. Follow these general steps:

1. צוגרייטן דעם מאָטאָציקל: Park the motorcycle on a level surface and secure it using a stand. Ensure the engine is cool.
2. אידענטיפיצירן בארג-פונקטן: Locate the designated attachment points on the motorcycle frame for the crash pads. These are typically existing bolt locations.
3. Panel Cut-out (if applicable): For some motorcycle models, it may be necessary to make a small cut-out in the fairing panel to accommodate the crash pad and mounting plate. Refer to the specific instructions provided with the kit for precise measurements and location. Use an appropriate tool for this task to ensure a clean cut and sufficient clearance.
4. צוטשעפּען מאָנטירונג האַרדווער: Secure the mounting brackets/plates to the frame using the provided fasteners. Do not fully tighten at this stage.
5. Install Sturzpads: Attach the polyamide Sturzpads to the mounting hardware. Ensure they are correctly oriented (left and right sides).
6. לעצט טייטנינג: Once both Sturzpads are in place and aligned, progressively tighten all fasteners to the recommended torque specifications.
7. דורכקוקן: After installation, visually inspect all components to ensure they are securely fastened and do not interfere with any moving parts or controls of the motorcycle.

בילד 1: נאָענט־אַרויף view of the SW-Motech Sturzpad installed on a motorcycle frame, showing its robust design and integration with the engine area.

5. וישאַלט

To ensure the continued effectiveness and safety of your SW-Motech Sturzpad Kit, perform the following maintenance checks:

• רעגולער דורכקוק: Periodically check the crash pads and their mounting hardware for any signs of damage, wear, or looseness.
• פאַסטער טייטנאַס: Ensure all mounting bolts remain securely tightened. Re-tighten if necessary, adhering to recommended torque values.
• רייניקונג: Clean the crash pads with a mild soap and water solution. Avoid harsh chemicals that may damage the polyamide material.
• פאַרבייַט: The metal-free abrasive pads are designed to be easily replaceable in case of damage. Contact SW-Motech or an authorized dealer for replacement parts.

6. טראָובלעשאָאָטינג

If you encounter any issues with your Sturzpad Kit, consider the following:

• פרייַ קאַמפּאָונאַנץ: If any part of the Sturzpad feels loose, re-check the tightness of all mounting bolts.
• אומרעכט פּאַסיק: Double-check that the correct kit for your specific motorcycle model (Kawasaki Z900 2016 or Z900RS 2017) has been installed. Review the installation steps carefully.
• ומגעוויינטלעך ראַש: Ensure no part of the Sturzpad or its mounting hardware is making contact with other motorcycle components during operation.

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

For specific warranty information or technical support regarding your SW-Motech Sturzpad Kit, please refer to the official SW-Motech webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער באווייז פון קויפן פאר יעדע גאראנטיע טענות.