Digoo DG-HOSA Smart Home Security Alarm System User Manual

1. פּראָדוקט איבערview

The Digoo DG-HOSA Smart Home Security Alarm System is a comprehensive security solution designed to protect your home. This system supports Wi-Fi, GSM, 2G, and 3G networks, offering flexible connectivity options. It features an intuitive control panel with a keypad and display, along with various wireless sensors for motion detection and door/window monitoring. The system can be controlled remotely via the "Easy security" mobile application, providing real-time alerts and management capabilities.

Figure 1.1: Complete Digoo DG-HOSA Smart Home Security Alarm System kit, including the main control panel, PIR motion detector, door/window sensors, and remote controllers.

2. וואָס איז אין דער קעסטל

ווען איר עפֿנט דעם פּאַקעט, ביטע קאָנטראָלירט אַז אַלע פֿאָלגנדיקע קאָמפּאָנענטן זענען אַרייַנגערעכנט:

• 1 x Digoo DG-HOSA Home Security Alarm Host (Main Control Panel)
• 1 x Wireless PIR Detector (Passive Infrared Motion Sensor)
• 2 x רימאָוט קאַנטראָולערז
• 2 x טיר/פֿענצטער סענסאָרן
• 4 x Assist Installation Screws
• 4 x Wall-in Fixed Rubber Blocks
• 1 x 1M USB Power Cable (for 5V power supply)

Figure 2.1: Main control panel shown with a PIR motion detector, a door/window sensor, and a remote controller, representing key components of the system.

3. סעטאַפּ גייד

3.1 ערשטע אויפשטאַרקונג און נעץ פֿאַרבינדונג

1. פאַרבינדן מאַכט: Use the provided USB power cable to connect the alarm host to a 5V power source.
2. סים קאַרטל אינסטאַלאַציע (אפציאָנעל): If using GSM/3G network, insert a compatible SIM card into the designated slot on the side of the control panel.
3. Wi-Fi קאַנפיגיעריישאַן:
   • Download the "Easy security" app from your smartphone's app store.
   • Ensure your smartphone and the alarm host are connected to the same Wi-Fi network during the initial setup.
   • Follow the in-app instructions to pair the alarm host with your Wi-Fi network.

פיגורע 3.1: זייַט view of the Digoo DG-HOSA control panel, highlighting the USB power port, SIM card slot, and reset button for initial setup and connectivity.

3.2 Sensor Installation and Pairing

The system supports up to 99 sensors. Each sensor needs to be installed and paired with the main control panel.

1. PIR באַוועגונג דעטעקטאָר:
   • Install the PIR detector in a corner or on a wall where it can cover the desired area, avoiding direct sunlight or heat sources.
   • Ensure the detector is at an appropriate height (typically 2-2.2 meters) for optimal coverage.
   • Pair the detector with the alarm host via the "Easy security" app or directly through the control panel's menu.
2. טיר/פֿענצטער סענסאָרן:
   • Mount the two parts of the door/window sensor (magnet and main unit) on the door/window frame and the moving part, ensuring they are aligned and within 1 cm of each other when closed.
   • Pair the sensors with the alarm host using the same method as the PIR detector.
3. ווייַט קאָנטראָללער:
   • The remote controllers are typically pre-paired. If not, follow the pairing instructions in the app or manual.

Figure 3.2: Individual components: Wireless PIR Motion Detector (left) and Wireless Door/Window Sensor (right), essential for comprehensive home security coverage.

4. אַפּערייטינג ינסטרוקטיאָנס

4.1 ניצן די קאָנטראָל פּאַנעל

The main control panel features a touchscreen display and a numeric keypad for direct interaction.

• אַרמינג: Press the "ARM" button or enter your passcode followed by "ARM" to activate the alarm system.
• דיסאַרמינג: Press the "DISARM" button or enter your passcode followed by "DISARM" to deactivate the alarm system.
• סאָס פונקציע: In an emergency, press the "SOS" button on the panel or remote controller to trigger an immediate alarm and send alerts to pre-programmed contacts.
• סעטטינגס: Navigate through the menu using the touchscreen to adjust system settings, add/remove sensors, set up alarm zones, and configure network preferences.

פיגורע 4.1: פראָנט view of the Digoo DG-HOSA control panel, displaying the touchscreen interface, numeric keypad, and function buttons for system control.

4.2 Mobile App Control ("Easy security")

The "Easy security" app provides full remote control and monitoring capabilities for your alarm system.

• ווייטער ארעם/דיסארם: Activate or deactivate the system from anywhere with an internet connection.
• פאַקטיש-צייט נאָוטאַפאַקיישאַנז: Receive instant push notifications for alarm events, low battery alerts, and system status changes.
• סענסאָר פאַרוואַלטונג: Add, remove, or configure individual sensors and their respective defense zones.
• Call and Message Settings: Set up emergency contacts to receive calls and SMS alerts during an alarm.
• סיסטעם סטאַטוס: View the current status of your alarm system and connected sensors.

5. וישאַלט

• באַטערי פאַרבייַט: Replace batteries in wireless sensors and remote controllers as indicated by low battery alerts on the control panel or app.
• רייניקונג: ווישט אָפּ דעם קאָנטראָל פּאַנעל און סענסאָרן מיט אַ ווייכן, טרוקענעם שטאָף. פֿאַרמייַדט ניצן אַברייסיוו רייניגער אָדער סאָלווענטן.
• Firmware דערהייַנטיקונגען: Periodically check for firmware updates via the "Easy security" app to ensure optimal performance and security.
• נעץ פעסטקייַט: Ensure a stable Wi-Fi and cellular network connection for reliable operation and remote access.

6. טראָובלעשאָאָטינג

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

For warranty information and technical support, please refer to the official DIGOO webזייטל אדער קאנטאקט זייער קאסטומער סערוויס. האלט אייער קויף קוויטל אלס באווייז פון קויפן פאר גאראנטיע פארלאנגען.

אָנליין רעסורסן:

• Official DIGOO Webפּלאַץ: www.digoo.cc (באַמערקונג: דאָס איז אַ פּלאַץ האָלדער URL, please refer to actual product documentation for correct support links.)
• "Easy security" App Support: Check the app's 'Help' or 'About' section for in-app support options.