Blum B970.1002-5

Blum Blumotion Soft Close Damper

מאָדעל: ב970.1002-5

1. הקדמה

Thank you for choosing the Blum Blumotion Soft Close Damper. This product is designed to provide a quiet and gentle closing action for cabinet doors, preventing slamming and reducing wear. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Blumotion dampערס.

2. זיכערקייַט אינפֿאָרמאַציע

3. פּעקל אינהאַלט

דיין פּעקל זאָל אַנטהאַלטן די פאלגענדע זאכן:

4. ינסטאַלירונג

The Blumotion damper is designed for easy installation into a 10mm bullet hole. Follow these steps for optimal performance:

  1. אידענטיפיצירן די אינסטאַלאַציע אָרט: Determine the best location on your cabinet frame or door to install the damper. It should be positioned so that the cabinet door makes contact with the damper when closing. Typically, this is on the cabinet frame near the hinge side.
  2. בויערט דאָס לאָך: Using a 10mm drill bit, carefully drill a hole approximately 50mm (2 inches) deep into the chosen location. Ensure the hole is straight and clean.
  3. אַרייַנלייגן די דampער: Gently push the Blumotion damper into the drilled hole. The damper should fit snugly. If it is too loose, the hole may be too large. If it is too tight, do not force it, as this may damage the dampער.
  4. טעסט פאַנגקשאַנאַליטי: Close the cabinet door slowly to ensure it makes contact with the damper and closes softly. Adjust the position if necessary. For optimal soft-closing, multiple dampers may be required for larger or heavier doors.
Blum Blumotion Soft Close Damper, angled view

פיגור 1: ווינקלדיק view of the Blum Blumotion Soft Close Damper. This image shows the cylindrical body and the grey soft-close tip.

Blum Blumotion Soft Close Damper, straight view

פיגור 2: גלייך-אויף view of the Blum Blumotion Soft Close Damper. This image highlights the full length of the damper and its grey tip.

5. אָפּעראַציע

Once installed, the Blumotion damper operates automatically. As the cabinet door closes, it will make contact with the damper's tip. The internal mechanism of the damper will then slow down the door's movement, ensuring a gentle and silent close. No manual adjustment is typically required after proper installation.

6. וישאַלט

The Blumotion Soft Close Damper requires minimal maintenance:

7. טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
Door does not close softly.Damper not making proper contact with the door, or door is too heavy for a single dampער.פאַרזיכערן די דamper is positioned correctly. For heavier doors, consider installing an additional dampער.
Damper falls out of the hole.Hole is too large, or damper was not fully inserted.Re-insert the damper firmly. If the hole is too large, a small amount of wood glue or a similar adhesive can be used to secure it.
Door still slams.Damper is faulty or not installed correctly.Verify installation steps. If the issue persists, the damper may need replacement.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

For specific warranty information, please refer to the documentation provided with your purchase or contact Blum directly. For technical support or further assistance, please visit the official Blum webפּלאַץ אָדער קאָנטאַקט זייער קונה סערוויס אָפּטיילונג.

Blum Official Webפּלאַץ: www.blum.com