FAAC 400 115V CBAC Standard Swing Gate Opener

הקדמה

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your FAAC 400 115V CBAC Standard Swing Gate Opener. Please read this manual thoroughly before beginning any installation or operation procedures. Retain this manual for future reference.

The FAAC 400 is a hydraulic gate operator designed for swing gates, suitable for various applications from residential to heavy industrial use. It features quiet operation, a key-protected manual release, and self-lubrication for extended life.

זיכערקייַט אינפֿאָרמאַציע

ווארענונג: Improper installation or use can lead to serious injury or property damage. Always follow local safety codes and regulations.

• ייַנמאָנטירונג מוזן זיין דורכגעקאָכט דורך קוואַלאַפייד פּערסאַנעל.
• Ensure all power is disconnected before performing any maintenance or installation.
• Keep hands and clothing clear of the gate and operator during operation.
• Do not allow children to play near the gate or operate the controls.
• Regularly inspect the gate and operator for signs of wear or damage.

סעטאַפּ און ינסטאַלירונג

The FAAC 400 operator is designed for swing gates up to 16 feet long and weighing up to 1,300 lbs. Proper gate preparation and mounting are crucial for optimal performance.

1. פאַר-ינסטאַלירונג טשעקס

• Verify the gate structure is sound and moves freely without obstruction.
• Ensure adequate space for the operator and its full range of motion.
• Confirm 115V AC power supply is available at the installation site.

2. Mounting the Operator

Mount the FAAC 400 operator securely to the gate post and gate leaf using appropriate hardware (not included). The exact mounting position will depend on the gate geometry and desired opening angle. Refer to the detailed mounting diagrams in the full installation guide (available from FAAC) for precise measurements.

Figure 1: The FAAC 400 115V CBAC Standard Swing Gate Opener. This image shows the elongated, silver-colored hydraulic arm of the gate opener with a black manual release mechanism visible on its side. The unit is designed to push and pull a gate open and closed.

3. עלעקטריקאַל קאַנעקשאַנז

Connect the operator to the control board (sold separately) and the 115V AC power supply. All electrical wiring must comply with local electrical codes and be performed by a licensed electrician. Ensure proper grounding.

• Connect power leads to the control board's designated terminals.
• Connect motor wires from the operator to the control board.
• Install safety devices such as photocells and safety edges as required.

4. Initial Programming and Calibration

After physical installation and electrical connections, the control board will need to be programmed to recognize the gate's travel limits and operating parameters. Refer to the control board's specific instruction manual for detailed programming steps. This typically involves:

• Learning the open and close positions.
• Setting force and speed parameters.
• Configuring remote controls and other accessories.

אַפּערייטינג ינסטראַקשאַנז

1. נאָרמאַל אָפּעראַציע

Once installed and programmed, the gate opener can be operated via a remote control, keypad, or other access control devices connected to the control board. Pressing the designated button will initiate the gate's opening or closing cycle.

• A single press typically opens a closed gate or closes an open gate.
• During operation, a second press may stop the gate, and a third press may reverse its direction, depending on the control board's programming.

2. Manual Release Procedure

In case of power failure or malfunction, the gate can be operated manually using the key-protected release mechanism on the operator.

1. Locate the manual release mechanism on the operator (refer to Figure 1).
2. Insert the provided key into the lock and turn it to unlock the mechanism.
3. Engage the release lever or knob as instructed by the specific model's design (e.g., pull, twist).
4. The gate can now be moved by hand.
5. To re-engage automatic operation, reverse the steps, ensuring the mechanism is fully locked.

וויכטיק: Always ensure the gate is secure when in manual mode to prevent unintended movement.

וישאַלט

Regular maintenance ensures the longevity and reliable operation of your FAAC 400 gate opener. The unit features self-lubrication, reducing the need for frequent manual lubrication.

• כוידעשלעך: Visually inspect the operator and gate for any signs of wear, damage, or loose connections. Check that the gate moves freely and smoothly.
• פערטל: Test all safety devices (photocells, safety edges) to ensure they are functioning correctly. Clean any debris from the gate's path and around the operator.
• יערלעך: Have a qualified technician inspect the hydraulic fluid levels and overall system performance.

באַמערקונג: Always disconnect power to the gate opener before performing any maintenance or inspection.

טראָובלעשאָאָטינג

די סעקציע באהאנדלט אלגעמיינע פראבלעמען וואס איר קענט באגעגענען. פאר קאמפליצירטע פראבלעמען, קאנטאקטירט א קוואליפיצירטן טעכניקער.

ספּעסאַפאַקיישאַנז

• מאָדעל: FAAC 400 115V CBAC Standard
• טייל נומער: 104201125
• טויער טיפ: סווינג גייט
• מאַקסימום טויער לענג: 16 פֿיס
• מאַקס טויער וואָג: 1,300 לבס
• מאַכט מקור: 115V AC, Corded Electric
• אָפּעראַציע: הידראַוליק
• שליסל פֿעיִקייטן: Hydraulic lock (open/closed), quiet operation, self-lubricating, key-protected manual release.
• ASIN: B074CHR3JJ

וואָראַנטי און שטיצן

FAAC products are manufactured to high standards and typically come with a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official FAAC webזייטל פֿאַר ספּעציפֿישע וואָראַנטי טערמינען און באַדינגונגען.

For technical support, spare parts, or service, please contact your authorized FAAC dealer or visit the official FAAC support portal. Ensure you have your model number (FAAC 400) and serial number (if applicable) ready when contacting support.

Note: This manual provides general guidance. Always consult the full, detailed installation and user manual provided by FAAC for comprehensive instructions and safety warnings.