הקדמה
The Weiser Phoenix Venetian Bronze Passage Door Knob is designed for interior doors that do not require a locking mechanism. This includes applications such as hallway doors and closet doors. Its traditional design and Venetian Bronze finish complement various home décors. The knob is reversible, allowing installation on both left-handed and right-handed doors.
Image: Weiser Phoenix Venetian Bronze Passage Door Knob, showcasing its traditional design and finish.
פּעקל אינהאַלט
באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:
- 1 Set of Door Knobs (Interior and Exterior)
- 1 Latch mechanism
- 1 Strike plate
- מאַונטינג סקרוז
- ייַנמאָנטירונג מאַנואַל
טיר ספּעסאַפאַקיישאַנז
Ensure your door meets the following specifications for proper fit and function:
- טיר גרעב: 1-3/8 inches to 1-3/4 inches (35mm - 44mm)
- Latch Backset: Adjustable for 2-3/8 inches or 2-3/4 inches (60mm or 70mm)
- קראָס באָר: 2-1/8 אינטשעס (54 מם)
סעטאַפּ און ינסטאַלירונג
Installation of the Weiser Phoenix Passage Door Knob is designed to be straightforward and can typically be completed with a screwdriver.
- צוגרייטן די טיר: Ensure the door has the correct bore holes and backset. If replacing an existing knob, remove the old hardware.
- ינסטאַלירן די לאַטש: Insert the latch mechanism into the edge bore hole of the door. Ensure the latch bolt faces the door frame. Secure it with the provided screws. The latch is adjustable to fit either a 2-3/8 inch or 2-3/4 inch backset.
- Install the Exterior Knob: Place the exterior knob assembly through the 2-1/8 inch cross bore hole, ensuring the spindle aligns with the latch mechanism.
- ינסטאַלירן די ינלענדיש קנופּ: Position the interior knob assembly over the spindle and align the mounting posts with the holes on the exterior assembly.
- Secure the Knobs: Fasten the interior and exterior knob assemblies together using the provided screws. Tighten securely, but do not overtighten, to ensure smooth operation.
- אינסטאַלירן די סטרייק פּלאַטע: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
- טעסט אָפּעראַציע: Open and close the door several times, turning the knobs to ensure the latch retracts and extends smoothly without binding.
אַפּערייטינג ינסטראַקשאַנז
The Weiser Phoenix Passage Door Knob is a non-locking mechanism designed for easy access. To open a door equipped with this knob:
- Grasp either the interior or exterior knob.
- Turn the knob in either direction (clockwise or counter-clockwise).
- Push or pull the door open.
The latch will retract when the knob is turned and extend automatically when the door is closed, holding the door in place without locking it.
זאָרגן און וישאַלט
To maintain the appearance and functionality of your Weiser Phoenix Door Knob, follow these guidelines:
- רייניקונג: רייניקט דעם קנעפּל מיט אַ ווייכן, דamp שטאָף. פֿאַרמײַדט אַברייסיוו רייניגער, סאָלווענטן, אָדער שטרענגע כעמיקאַלן, ווײַל די קענען שאַטן די ענדיקונג.
- שמירן: If the latch mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the latch bolt. Do not use oil-based lubricants, as they can attract dust and debris.
- טייטנינג: Periodically check the mounting screws for tightness. If the knobs feel loose, gently tighten the screws to ensure secure attachment.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Knob is loose or wobbly. | מאַונטינג סקרוז זענען פרייַ. | Tighten the mounting screws connecting the interior and exterior knob assemblies. |
| Latch does not retract smoothly. | Debris in the latch mechanism or lack of lubrication. | Clean the latch mechanism. Apply a small amount of silicone-based lubricant to the latch bolt. |
| Door does not close properly or rattles. | Strike plate misalignment. | Adjust the position of the strike plate on the door frame to ensure proper alignment with the latch bolt. |
| Knob is difficult to turn. | Over-tightened mounting screws or misaligned components. | Loosen mounting screws slightly and re-test. Ensure all components are correctly aligned during installation. |
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | ווייזער |
| מאָדעל נומער | 9GA1010-015 |
| סטייל | Hall/Closet (Passage) |
| קאָליר | ווענעטיאַן בראָנדז |
| ענדיקן | בראַשט |
| פאָרעם | קייַלעכיק |
| טיפּ פון שעפּן | קנופּ |
| לאַק טיפּ | קיין לאַק |
| טיר גרעב קאָמפּאַטאַביליטי | 1-3/8" - 1-3/4" |
| לאַטש באַקסעט | Adjustable 2-3/8" - 2-3/4" |
| Cross Bore | 2-1/8" |
| פּונקט וואָג | 480 ג |
| פּראָדוקט דימענשאַנז | 11.58 X 7.59 X 7.59 סענטימעטער |
| ספּעציעלע שטריך | גרינג צו ינסטאַלירן |
וואָראַנטי אינפֿאָרמאַציע
This Weiser product comes with a 30-טאָג וואָראַנטי. For specific details regarding mechanical and finish warranties, please refer to the documentation included with your purchase or visit the official Weiser webפּלאַץ.
קונה שטיצן
For further assistance, technical support, or warranty claims, please contact Weiser customer service. You can find contact information and additional resources on the official Weiser webפּלאַץ:
Visit Weiser's Official Webפּלאַץ
Please have your model number (9GA1010-015) and purchase information ready when contacting support.
