מאַניואַלז+

KERN PCD 6K-4

KERN PCD 6K-4 Precision Laboratory Balance User Manual

Model: PCD 6K-4

1. הקדמה

This manual provides essential instructions for the safe and efficient operation of your KERN PCD 6K-4 Precision Laboratory Balance. This laboratory scale features a separate weighing platform, making it ideal for use in specialized environments such as glove-bags or extractor cabinets, particularly when weighing toxic, volatile, or contaminated substances. It includes a PRE-TARE function for manual extraction of known container weights, useful for precise filling quantity controls.

ביטע ליינט דעם מאַנואַל גרינטלעך איידער איר ניצט עס ערשט און האַלט עס פֿאַר שפּעטערדיקע רעפֿערענץ.

2. זיכערקייַט אינסטרוקציעס

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן און נישט געשעדיגט ביים אויספּאַקן:

KERN PCD 6K-4 Precision Laboratory Balance with separate weighing platform and digital display unit.

Figure 1: KERN PCD 6K-4 Precision Laboratory Balance
This image shows the KERN PCD 6K-4 precision laboratory balance. It consists of a square weighing platform with a stainless steel surface, connected by a cable to a separate digital display unit. The display unit features a large digital readout, along with buttons for ON/OFF, MODE/CAL, SET/M, PRINT, and TARE. The display indicates a maximum capacity of 3500g and a readability of 0.01g, though the model is 6K-4 (6000g max). The separate design is ideal for use in specialized environments like glove-bags.

4. סעטאַפּ

  1. אָרט: Place the weighing platform and display unit on a stable, vibration-free, and level surface. Ensure sufficient space for operation and avoid direct sunlight, drafts, or significant temperature fluctuations.
  2. פֿאַרזאַמלונג: Connect the cable from the weighing platform to the designated port on the digital display unit.
  3. לעוועלינג: Use the adjustable foot bolts located on the underside of the weighing platform to level the balance. Observe the integrated spirit level (if present) to ensure precise horizontal alignment.
  4. ווינט שוץ: If your model includes a wind protection ring (for Ø 105 mm weighing plates), carefully place it around the weighing platform. This helps stabilize readings in environments with air currents.
  5. מאַכט קשר: Connect the power adapter to the display unit and then plug it into a suitable power outlet.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1 מאַכט אויף / אַוועק

5.2 גרונטלעכע וואָג

  1. Ensure the balance is powered on and displays 0.00g.
  2. Carefully place the item to be weighed onto the center of the weighing platform.
  3. Wait for the display to stabilize. The stable weight will be shown.
  4. Remove the item from the platform.

5.3 TARE Function

The TARE function allows you to subtract the weight of a container, so only the net weight of the contents is displayed.

  1. Place the empty container onto the weighing platform. The display will show its weight.
  2. דרוק די TARE button. The display will reset to 0.00g.
  3. Add the substance to be weighed into the container. The display will show the net weight of the substance.

The balance also features a PRE-TARE function for manual entry of a known container weight. Consult the full manual for detailed instructions on using PRE-TARE, typically accessed via the מאָדע / קאַל or SET/M button in specific modes.

5.4 Unit Selection / Mode

דרוק די מאָדע / קאַל button to cycle through available weighing units (e.g., grams, kilograms, pounds, ounces) or to enter different operating modes. Refer to the full manual for a list of supported units and mode functions.

5.5 קאַלאַבריישאַן

Regular calibration ensures the accuracy of your balance. Calibration should be performed using certified calibration weights.

  1. Ensure the balance is stable and free from any load.
  2. דריקן און האַלטן די מאָדע / קאַל button until "CAL" appears on the display.
  3. Follow the on-screen prompts to place the required calibration weight(s) onto the platform.
  4. Once calibration is complete, the balance will return to weighing mode.

Note: Specific calibration procedures may vary. Always consult the detailed instructions provided with your balance for precise steps and recommended calibration weights.

5.6 Print Function

If your balance is connected to a compatible printer or data interface, pressing the דרוקן button will send the current weighing data to the connected device.

6. וישאַלט

7. טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
ווייַז איז נישט קער אויף.קיין מאַכט צושטעל; דעפעקטיווער מאַכט אַדאַפּטער.Check power connection; ensure adapter is functional.
Unstable readings.Vibrations; drafts; uneven surface; electromagnetic interference.Place on stable surface; use wind protection; level the balance; move away from interfering devices.
Incorrect weight displayed.Balance not calibrated; object placed off-center; overload.Perform calibration; place object centrally; ensure weight is within capacity.
"Err" or other error message.איבערלאַסט; אינערלעכע טעות.Remove load; restart balance. If error persists, contact support.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

For warranty information, technical support, or service inquiries, please contact your KERN dealer or visit the official KERN website. Keep your purchase receipt and product serial number available when contacting support.