APS CL6360H Main Upper Stainless Steel Black Mesh Rivet Grille Insert Instruction Manual

1. פּראָדוקט איבערview

This document provides installation and maintenance instructions for the APS CL6360H Main Upper Stainless Steel Black Mesh Rivet Grille Insert. This product is designed to enhance the front appearance of your vehicle by adding a custom grille overlay.

Image 1.1: Two APS CL6360H black mesh rivet grille inserts, showing their design and construction.

2. קאַמפּאַטאַבילאַטי

This grille insert is compatible with the following vehicle models:

• Chevy Silverado 1500 (Model Years: 2016, 2017, 2018)
• Chevy Silverado 1500 LD (Model Year: 2019)

וויכטיק באַמערקונג:

• Not compatible with Z71 and High Country models.
• This product is a grille insert only; the original equipment (OE) grille shell remains on the vehicle after installation. Logo, emblem, frame, or shell are not included.

3. פּעקל אינהאַלט

ביים עפענען דעם פּעקל, זאָל מען זיכער מאַכן אַז אַלע קאָמפּאָנענטן זענען פאַראַן און נישט געשעדיגט:

• Main Upper Grille Insert (1.8mm Wire Mesh Rivet Style, Black, Quantity: 2 pieces)
• Mounting Hardware (screws, clampז, וכו')
• Installation Paper (detailed instructions)

אויב קיין זאכן זענען פעלנדיק אָדער דאַמידזשד, ביטע קאָנטאַקט קונה שטיצן מיד.

4. סעטאַפּ (אינסטאַלאַציע)

This grille insert utilizes a Bolt Over/Overlay/Bolton installation method, which requires drilling. The original grille shell must remain on the vehicle. Professional installation is recommended.

פארלאנגט מכשירים (ניט אַרייַנגערעכנט):

• בויער
• Drill bits (appropriate size for mounting hardware)
• מעסטן טייפּ אָדער ווירע
• מאַרקער אָדער בלייַער
• Protective eyewear and gloves

ינסטאַלירונג סטעפּס:

1. צוגרייטונג: Ensure the vehicle's front end, particularly the existing grille area, is clean and free of debris.
2. פּאַזישאַנינג: Carefully place the new grille insert over the existing OE grille shell. Align it to ensure proper fitment and desired aesthetic.
3. מאַרקינג בויער ווייזט: Once aligned, use a marker or pencil to accurately mark the drilling locations through the tabs on the new grille insert onto the OE grille shell.
4. דרילינג: Remove the new grille insert. Using the marked points, carefully drill pilot holes into the OE grille shell. Ensure drill bit size matches the provided mounting hardware to avoid damage.
5. Securing the Insert: Reposition the new grille insert. Align the tabs with the drilled holes. Use the provided mounting hardware (screws, clamps) to secure the insert firmly to the OE grille shell. Ensure all connections are tight and secure.
6. לעצט טשעק: Verify that the grille insert is securely mounted and does not obstruct any vehicle functions or lighting.

בילד 4.1: עקס.ample of the APS CL6360H grille insert installed on a compatible Chevy Silverado 1500. Note that the original grille shell remains.

5. אַפּערייטינג ינסטרוקטיאָנס

The APS CL6360H grille insert is a static cosmetic and protective component. It does not require any operational procedures after installation. Once properly installed, it functions passively to enhance vehicle aesthetics and provide a layer of protection to the radiator area.

6. וישאַלט

To ensure the longevity and appearance of your grille insert, follow these maintenance guidelines:

• רעגולער רייניקונג: Clean the grille insert regularly with mild automotive soap and water. Use a soft cloth or sponge to avoid scratching the powder-coated finish.
• ויסמיידן האַרב קעמיקאַלז: ניצט נישט קיין שאַרפע רייניקונגס־מיטלען, סאָלווענטן אדער שטרענגע כעמיקאַלן, ווייל די קענען שאַטן די ענדיקונג.
• דורכקוקן פאַסטנערס: Periodically check all mounting hardware to ensure they remain tight and secure. Re-tighten if necessary.
• שעדיקן דורכקוק: Inspect the grille for any signs of damage (e.g., bent mesh, loose rivets) after impacts or off-road driving. Address any issues promptly.

7. טראָובלעשאָאָטינג

This section addresses common concerns that may arise during or after installation.

Issue: Grille insert does not align properly or fit flush.

מעגלעך סיבות:

• Incorrect vehicle model or year.
• Tabs on the insert are bent or misaligned.
• Drill holes on the OE grille shell are not accurately placed.

לייזונג:

• Double-check vehicle compatibility against the product specifications.
• Carefully inspect the grille insert for any manufacturing defects or shipping damage. Gently adjust tabs if slightly bent, but avoid excessive force.
• Ensure precise marking and drilling of holes. If holes are significantly off, professional assistance may be required.

Issue: Mounting hardware feels loose after installation.

מעגלעך סיבות:

• Hardware not tightened sufficiently.
• Incorrect drill bit size used, resulting in oversized holes.

לייזונג:

• Re-tighten all mounting hardware. Do not overtighten to avoid stripping threads or damaging components.
• If holes are oversized, consider using larger washers or alternative fastening methods (e.g., rivet nuts) with professional guidance.

For issues not covered here, please refer to the "Warranty and Support" section.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

APS is committed to customer satisfaction. If you encounter any quality problems with your grille insert, please do not hesitate to contact our customer service team.

While specific warranty details are not provided in this manual, APS offers professional and sincere service to resolve product-related issues.

For assistance, please contact APS customer support through the retailer's platform or the official APS webפּלאַץ.