הקדמה
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BeA 14/32-613 Pneumatic Stapler, Model 12000215. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
Image: The BeA 14/32-613 Pneumatic Stapler, a compact and lightweight tool, shown in its typical blue and black finish. It features a comfortable grip and a durable magazine for staples.
זיכערקייַט אינסטרוקציעס
Always follow basic safety precautions when using pneumatic tools to reduce the risk of injury. Keep this manual for future reference.
- טראָגט פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט (PPE), אַרייַנגערעכנט זיכערהייטס-ברילן און געהער-שוץ.
- זיכער מאַכן אַז די אַרבעטס־געגנט איז ריין, גוט באַלויכטן, און פֿרײַ פֿון שטערונגען.
- Disconnect the air supply before making adjustments, clearing jams, or performing maintenance.
- קיינמאָל ווענדן די געצייַג צו זיך אָדער אנדערע.
- Use only fasteners specified for this tool.
- ניצט נישט דעם געצייג אויב עס איז געשעדיגט אדער פונקציאנירט נישט גוט.
- Keep hands and body parts away from the discharge area.
פּראָדוקט ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נומער | 12000215 |
| טיפּ טיפּ | 14 type staples |
| Staple Length Range | 5/8" to 1 1/4" |
| Crown Size | 7/16" |
| מאָס | 16/17 מאָס |
| אַרבעט דרוק | 75-120 פּסי |
| לופט קאַנסאַמשאַן | 0.031 cu. Ft./Cycle @ 90PSI |
| פּונקט וואָג | 3.3 פונט |
| פּראָדוקט דימענשאַנז | 7.8 X 2.2 X 10 אינטשעס |
| אָפּעראַציע מאָדע | אָטאַמאַטיק |
| קאַפּאַציטעט באַשרייַבונג | גאַנץ סטריפּ |
קאָמפּאַטיבלע פאַסטנערס: 14/15 NK HZ, 14/18 NK HZ, 14/21 NK HZ, 14/25 NK HZ, 14/30 NK HZ, 14/32 NK HZ, 14/32 NRHZ DP.
Setup and Loading
1. פֿאַרבינדן זיך צו דער לופֿט־צושטעל
- Ensure the air compressor is off and the air hose is depressurized.
- Connect a suitable air hose (minimum 3/8" I.D.) to the tool's air inlet fitting.
- Set the air compressor pressure regulator to the recommended working pressure of 75-120 PSI. Do not exceed 120 PSI.
- קאָנטראָלירן אַלע קאַנעקשאַנז פֿאַר ליקס איידער אָפּעראַציע.
2. לאָודינג סטייפּאַלז
- Disconnect the tool from the air supply for safety.
- Locate the magazine latch or release mechanism.
- Open the magazine and insert a strip of compatible 14 type staples, ensuring the staple legs face downwards.
- פֿאַרמאַכט דעם זשורנאַל זיכער ביז עס פֿאַרשפּאַרט זיך.
- פֿאַרבינדט ווידער די לופט צושטעל.
אַפּערייטינג ינסטראַקשאַנז
The BeA 14/32-613 Pneumatic Stapler is designed for applications such as furniture industry, caravans, general carpentry, pallets and boxes, and paneling.
- Ensure the tool is properly loaded with staples and connected to the air supply.
- Position the nose of the stapler firmly against the workpiece where the staple is to be driven.
- Depress the safety mechanism (if applicable) and then pull the trigger to drive a staple.
- For continuous operation, maintain pressure on the nose and trigger, moving the tool along the workpiece.
- שטענדיק האַלטן אַ פעסט גריפּ אויף די געצייַג בעשאַס אָפּעראַציע.
אַדזשאַסטינג די טיף פון דרייוו
This model may feature an adjustable depth of drive. Refer to the tool's specific design for the adjustment mechanism, typically a knob or lever near the nosepiece. Test on scrap material to achieve the desired staple depth.
וישאַלט און זאָרג
Regular maintenance ensures the longevity and optimal performance of your stapler. The tool is designed to be easy to service.
- טעגלעך: Add a few drops of pneumatic tool oil into the air inlet before each use. This lubricates internal components.
- וועכנטלעך/מאנאטלעך:
- Clean the tool exterior with a damp שטאָף. דו זאלסט נישט נוצן האַרב סאָלוואַנץ.
- Inspect the nosepiece and magazine for debris or staple residue and clean as necessary.
- Check all screws and fasteners for tightness and tighten if loose.
- Inspect the air hose and fittings for wear or damage. Replace if necessary.
- סטאָרידזש: Store the tool in a clean, dry place when not in use. Disconnect from air supply.
Service Instructions and Spare Parts
For detailed service instructions and a complete list of spare parts, please refer to the documentation included with your purchase or contact BeA customer support. Regular servicing by qualified personnel is recommended for complex repairs.
טראָובלעשאָאָטינג
This section addresses common issues you might encounter with your pneumatic stapler.
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Staples not driving fully | Low air pressure; incorrect staple length; worn driver blade. | Increase air pressure (within limits); use correct staple length; contact service for blade replacement. |
| Tool misfires or skips staples | Magazine empty; incorrect staples; debris in magazine; worn feeder. | Reload staples; ensure correct staple type; clean magazine; contact service. |
| Air leaks from tool | Loose fittings; damaged O-rings or seals. | פֿעסטשטעלן די פֿיטינגז; קאָנטאַקטירן סערוויס פֿאַר אַ פֿאַרבײַט פֿון די פֿאַרזיגלונגען. |
| Staples jam frequently | Bent staples; debris in nosepiece/magazine; worn driver. | Use unbent staples; clear debris (disconnect air first); contact service. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact BeA customer support.
וואָראַנטי און שטיצן
BeA products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official BeA webפּלאַץ.
For technical support, spare parts, or service inquiries, please contact BeA customer service through their official channels. When contacting support, please have your model number (12000215) and serial number (if applicable) ready.
BeA Official Webפּלאַץ: www.bea-group.com
