1. הקדמה
This manual provides comprehensive instructions for the safe and effective use of your Aidapt VM844B Weather Resistant Combination Wall Mount Key Safe. This device is designed to provide secure storage for keys, allowing controlled access for authorized individuals such as caregivers, emergency personnel, or guests in holiday lets. Please read these instructions thoroughly before installation and operation to ensure proper functionality and security.
2. זיכערקייַט אינפֿאָרמאַציע
- Always keep your combination confidential and do not share it with unauthorized persons.
- Ensure the key safe is securely mounted to a solid surface to prevent unauthorized removal.
- After closing the safe, always scramble the combination dials to secure the contents.
- Do not store the combination inside the key safe.
- קאָנטראָלירט רעגולער די מאַונטינג פֿאַר יעדע סימן פון לאָזנקייט אָדער שעדיקן.
3. פּעקל אינהאַלט
באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:
- Aidapt VM844B Key Safe Unit
- Fixing Kit (screws and wall plugs)
- ינסטרוקטיאָן מאַנואַל (דעם דאָקומענט)
4. סעטאַפּ און ייַנמאָנטירונג
4.1 Initial Opening and Combination Setting
The key safe is factory set to open with the combination 0-0-0-0.
- Slide the black shutter cover downwards to reveal the dials.
- Rotate the dials to the factory default combination 0-0-0-0.
- Pull the door release lever (located below the dials) downwards. The door will spring open.
- Inside the safe, locate the reset lever on the back of the door. Slide this lever from position A to position B (usually left to right or up to down).
- With the lever in position B, set your desired 4-digit combination by rotating the dials. Choose a memorable but secure combination.
- Slide the reset lever back to position A. Your new combination is now set.
- Close the door, scramble the dials, and test your new combination to ensure it opens correctly before mounting.
פיגורע 1: ינלענדיש view of the Aidapt VM844B Key Safe with the door open, illustrating the key storage compartment and the combination reset lever located on the inside of the door.
4.2 Mounting the Key Safe
Choose a discreet, solid, and weather-protected location for mounting. The key safe is weather-resistant, but direct exposure to extreme elements may reduce its lifespan.
- Open the key safe door (using your new combination).
- Hold the key safe against the desired mounting surface and mark the positions of the four mounting holes on the back panel.
- Using an appropriate drill bit for your wall type, drill pilot holes at the marked positions.
- Insert the provided wall plugs (if applicable for your wall type) into the drilled holes.
- Align the key safe with the holes and secure it firmly using the provided screws. Ensure it is tightly fastened and does not wobble.
5. Operating the Key Safe
5.1 Opening the Key Safe
- Slide the black shutter cover downwards.
- Rotate the combination dials to your secret 4-digit code.
- Pull the door release lever downwards. The door will open.
5.2 Storing and Retrieving Keys
Place your keys inside the designated compartment. Ensure the door can close freely without obstruction.
5.3 Closing and Securing the Key Safe
- מאַכט פעסט צו די טיר ביז זי קליקט זיך צו.
- קריטיש וויכטיק, scramble the combination dials to random numbers. This prevents unauthorized access.
- Slide the black shutter cover upwards to protect the dials from weather and conceal the combination.
פיגורע 2: פראָנט view of the Aidapt VM844B Key Safe in its closed position, showing the combination dials and the protective shutter cover.
6. וישאַלט
- רייניקונג: ווישן די יקסטיריער מיט אַדamp שטאָף. פֿאַרמײַדט אַברייסיוו רייניגער אָדער סאָלווענטן.
- וועטער שוץ: While weather-resistant, periodically check the shutter cover for proper sealing and ensure no debris is obstructing the dials.
- מאָונטינג טשעק: Periodically inspect the mounting screws to ensure they remain tight and secure.
7. טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Safe will not open with combination. | Incorrect combination entered; dials not aligned; reset lever not fully in position A. | Double-check your combination. Ensure each dial clicks into place. Verify the reset lever is fully in position A. |
| Door will not close properly. | Keys or other items obstructing the door mechanism. | Ensure all contents are fully inside the safe and not interfering with the door. |
| Forgot the combination. | Combination lost. | וויכטיק: If the safe is closed and the combination is forgotten, there is no master key or override. The safe will need to be opened by force, which will damage the unit. Always keep a record of your combination in a secure, separate location. |
8. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | אַידאַפּט |
| מאָדעל | VM844B |
| ספּעציעלע שטריך | וועטער קעגנשטעליק |
| לאַק טיפּ | 4-Digit Combination Lock |
| מאַטעריאַל | מעטאַל |
| נומער דימענשאַנז (L X W X H) | 1.57 x 3.46 x 4.8 inches (40 x 88 x 122 mm approx.) |
9. וואָראַנטי און שטיצן
Aidapt products are manufactured to high standards and are subject to rigorous quality control. In the unlikely event of a problem, please contact your retailer or Aidapt customer support for assistance. Please retain your proof of purchase.
For further support or inquiries, please refer to the contact information provided with your purchase or visit the official Aidapt webפּלאַץ.
