גינקאָ גראַוויטי קוב קליק זייגער GK18TL באַניצער מאַנואַל

הקדמה

The Gingko Gravity Cube Click Clock is an innovative alarm clock designed for ease of use and modern aesthetics. This device features a sound-activated LED display, a gravity-controlled alarm function, and a touch-sensitive snooze. This manual provides detailed instructions for setting up, operating, and maintaining your Gravity Cube Click Clock.

פיגורע 1: פראָנט view of the Gingko Gravity Cube Click Clock.

סעטאַפּ

Before using your Gravity Cube Click Clock, please follow these steps for initial setup.

1. פּאַוערינג די מיטל

The clock can be powered via USB or batteries.

• USB Power: Connect the provided USB cable to the DC5V port on the back of the clock and plug the other end into a USB power adapter (not always included) or a powered USB port.
• באַטאַרייע מאַכט: Open the battery compartment on the back of the clock. Insert 1 Lithium Polymer battery (required, not always included) according to the polarity markings. Ensure the battery is securely placed.

Figure 2: Back panel with controls and power input.

2. Initial Settings (Time, Date, Temperature)

Upon first power-on, the display will activate. You will need to set the current time and date.

1. דרוק די שטעלן button on the back of the clock to enter setting mode.
2. ניצן די + און - buttons to adjust the values (e.g., hour, minute, year, month, day).
3. דרוק שטעלן again to confirm each setting and move to the next parameter.
4. Continue until all settings (time, date, temperature unit if applicable) are configured.

אַפּערייטינג ינסטראַקשאַנז

1. Display Activation

The LED display is sound-activated. It will automatically switch off when the room is quiet to conserve power. To activate the display:

• Make a sound (e.g., clap your hands).
• Gently tap the bedside table or surface the clock is resting on.

The display will show time, date, and temperature alternately.

Figure 3: Clock displaying time.

2. באַשטעטיקן די שרעק

The Gravity Cube features a gravity-controlled alarm.

1. דרוק די שרעק יקאָן button on the back of the clock to enter alarm setting mode.
2. ניצן די + און - קנעפּלעך צו שטעלן די געוואונטשענע שרעק צייט.
3. דרוק די שרעק יקאָן קנעפּל ווידער צו באַשטעטיקן.
4. To activate the alarm, ensure the side of the clock with the alarm icon is facing upwards. The display will show an alarm indicator.
5. To deactivate the alarm, turn the clock over so a different side is facing upwards. The alarm indicator will disappear.

3. שלאָף פונקציע

When the alarm sounds, you can activate the snooze function:

• Gently touch the top surface of the clock (where "SNOOZE" is indicated). The alarm will pause for a short period (typically 5-9 minutes) and then sound again.

4. Voice/Sound Control Sensitivity (V/S)

די V/S button on the back panel may allow adjustment of the sound activation sensitivity for the display. Refer to the specific product packaging or a more detailed manual for precise control over this feature.

וישאַלט

To ensure the longevity and proper functioning of your Gingko Gravity Cube Click Clock, follow these maintenance guidelines:

• רייניקונג: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the rubberized finish.
• באַטערי פאַרבייַט: If using battery power, replace the Lithium Polymer battery when the display dims or functions become erratic. Ensure correct polarity when inserting new batteries.
• סטאָרידזש: אויב איר לייגט אַוועק די זייגער פֿאַר אַ לענגערע צייט, נעמט אַרויס די באַטעריעס כּדי צו פֿאַרמייַדן ליקאַדזש.

טראָובלעשאָאָטינג

If you encounter issues with your Gravity Cube Click Clock, refer to the following common problems and solutions:

• Display Not Activating:
  • Check power source: Ensure USB cable is securely connected or batteries are correctly inserted and not depleted.
  • Make a louder sound or tap the surface more firmly to activate the display.
• שרעק ניט קלאַנג:
  • Verify the alarm is set correctly (refer to "Setting the Alarm" section).
  • Ensure the side with the alarm icon is facing upwards to activate the alarm.
  • Check battery level if operating on batteries.
• Alarm Cannot Be Turned Off:
  • Turn the clock over to a different side to deactivate the alarm.
  • If the issue persists, temporarily remove batteries or disconnect USB power to reset the device.
• אומרעכטע צייט/דאטום:
  • Re-enter the setting mode using the שטעלן button and adjust the time and date.
  • Ensure batteries are not low, as this can sometimes affect timekeeping.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

Specific warranty information for the Gingko Gravity Cube Click Clock GK18TL is typically provided with the product packaging or available on the manufacturer's official website. Please refer to these sources for details regarding warranty coverage and terms.

For technical support or further assistance, please contact Gingko customer service through their official webפּלאַץ אָדער די קאָנטאַקט אינפֿאָרמאַציע צוגעשטעלט מיט דיין קויפן.