FOMITO 11-inch Articulating Magic Arm and Super Clamp באַניצער מאַנואַל

1. הקדמה

This manual provides comprehensive instructions for the safe and effective use of your FOMITO 11-inch Articulating Magic Arm and Super Clamp. This versatile accessory combination is designed to securely mount various photographic and videographic equipment, including LCD monitors, LED video lights, and cameras, to a wide range of surfaces and rigs.

Please read this manual thoroughly before initial use to ensure proper setup and operation.

2. פּראָדוקט איבערview

2.1 פּעקל אינהאַלט

• 1 x FOMITO 11-inch Articulating Magic Arm
• 1 x FOMITO Super Clamp

Image: The package includes one 11-inch articulating arm, one super clamp, and a small adapter.

2.2 שליסל פֿעיִקייטן

• 11-inch Articulating Magic Arm: Features a single locking knob for simultaneous release or enlargement of tension across all three articulating joints, allowing for flexible positioning.
• סופּער קלamp: Designed for secure attachment to various surfaces, poles, or rods. Equipped with non-slip pads for enhanced grip and protection.
• וניווערסאַל קאַמפּאַטאַבילאַטי: Both components feature 1/4"-20 and 3/8"-16 screw threads for broad compatibility with cameras, monitors, lights, and other accessories.
• דוראַבאַל קאַנסטראַקשאַן: Constructed from aluminum alloy for strength and longevity.

Image: The FOMITO 11-inch Articulating Magic Arm and Super Clamp shown separately.

Image: Illustration highlighting the upgraded metal knob design for improved durability compared to older plastic versions.

3. סעטאַפּ אינסטרוקציעס

3.1 Attaching the Super Clamp

1. Identify a stable surface, rod, or pole for attachment.
2. Unscrew the T-handle on the Super Clamp to open its jaws.
3. שטעלן די קלamp around the desired object, ensuring the non-slip pads make full contact.
4. Tighten the T-handle until the clamp is securely fastened. Do not overtighten.

Image: The Super Clamp jaw can open up to 1.8 inches (45mm) and features 1/4" and 3/8" screw mounts.

3.2 Attaching the Magic Arm

1. Locate the 1/4"-20 or 3/8"-16 screw mount on the Super Clamp.
2. Screw one end of the Articulating Magic Arm onto the chosen mount until it is finger-tight.
3. Ensure the arm is firmly attached to prevent rotation or loosening during use.

3.3 Mounting Equipment to the Magic Arm

1. Identify the appropriate screw mount (1/4"-20 or 3/8"-16) on your equipment (e.g., monitor, LED light, camera).
2. Screw the equipment onto the free end of the Articulating Magic Arm.
3. פאַרשטייַפן סיקיורלי.
4. וויכטיק: The maximum recommended payload for this arm is 1.5 kg (approximately 3.3 lbs). Exceeding this limit may result in instability or damage.

Image: A monitor mounted on the Magic Arm, which is attached to a camera cage. The image indicates a maximum payload of 1.5 kg.

4. אַפּערייטינג ינסטרוקטיאָנס

4.1 Adjusting the Articulating Magic Arm

1. To adjust the position of the arm, loosen the central locking knob. This will release tension on all three joints simultaneously.
2. Carefully reposition the arm and the attached equipment to the desired angle and height. The arm allows for 360-degree rotation at its ball joints.
3. Once the desired position is achieved, tighten the central locking knob firmly to secure the arm in place. Ensure it is tight enough to prevent sagging, especially with heavier loads within the specified limit.

Image: The Magic Arm's joints allow for full 360-degree rotation, providing extensive positioning flexibility.

Image: Detail of the central locking knob, which controls the tension of all articulating joints.

4.2 Adjusting the Super Clamp

די סופּער קלamp's jaw opening is adjusted by rotating the T-handle. Turn clockwise to tighten and counter-clockwise to loosen. Ensure the clamp is always securely fastened to prevent equipment from falling.

בילד: עקסamples of the Magic Arm and Super Clamp in use, demonstrating versatility for mounting on various objects and camera setups.

5. וישאַלט

• רייניקונג: Wipe the arm and clamp with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• דורכקוק: Regularly inspect all screws, joints, and the locking knob for any signs of wear or damage. Ensure all connections are tight before each use.
• סטאָרידזש: Store the product in a dry, clean environment away from extreme temperatures.

6. טראָובלעשאָאָטינג

6.1 Arm Sagging or Not Holding Position

• Check Payload: Ensure the total weight of the mounted equipment does not exceed the maximum payload of 1.5 kg.
• Tighten Knob: Fully tighten the central locking knob. If it feels loose or stripped, the internal mechanism may be worn.
• צענטער פון גראַוויטי: For optimal stability, try to position the equipment so its center of gravity is as close to the central joint as possible, minimizing leverage.

6.2 סופּער קלamp Not Securing Properly

• ייבערפלאַך קאַמפּאַטאַבילאַטי: Ensure the surface or object being clamped is within the jaw's adjustable range (11mm to 45mm) and provides sufficient friction for the non-slip pads.
• Tighten T-handle: Ensure the T-handle is fully tightened.
• דורכקוקן די פּאַדס: Check the non-slip pads for wear or damage that might reduce grip.

7. ספּעסאַפאַקיישאַנז

Image: Diagram showing the dimensions of the Magic Arm (7.4 inches / 18.8 cm) and Super Clamp (3.5 inches / 9 cm).

8. וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the official FOMITO webזייטל אדער קאָנטאַקט אייער הענדלער. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן.