הקדמה
This manual provides detailed instructions for the installation, operation, and maintenance of the Shimano Tiagra BR-4700 Front Brake Caliper. Designed for road bicycles, this component offers precise and reliable braking performance. Adhering to these guidelines will ensure optimal function and longevity of your brake caliper.
פּראָדוקט איבערview
The Shimano Tiagra BR-4700 Front Brake Caliper is engineered for road cycling, featuring a robust and lightweight design. Key characteristics include:
- קאַנסטראַקשאַן: Advanced lightweight aluminum with a durable anodized finish for corrosion resistance.
- Braking Technology: Super SLR dual pivot mechanism minimizes friction for smooth and efficient braking.
- קאַמפּאַטאַבילאַטי: Features a 49 mm drop and mid-reach caliper mounting (47mm-57mm), suitable for various road bike frames and fork setups.
- Lever Actuation: Optimized for short pull brake levers, providing enhanced braking power and control.
- פּלאַן: Sleek gray finish with refined proportions, integrating modern aesthetics with technical functionality.
Figure 1: Shimano Tiagra BR-4700 Front Brake Caliper. This image displays the gray aluminum construction, dual-pivot design, and integrated R50T5 brake pads.
סעטאַפּ און ינסטאַלירונג
Proper installation is crucial for safe and effective braking. If you are unsure about any step, consult a professional bicycle mechanic.
- Prepare the Fork: Ensure the front fork's brake mounting hole is clean and free of debris.
- Mount the Caliper: Insert the caliper's mounting bolt through the fork crown. Secure it with the appropriate nut and washer from the backside of the fork. Ensure the caliper is centered over the wheel rim. The BR-4700 uses a mid-reach mount with a 49mm drop.
- Attach Brake Cable: Route the brake cable from your short-pull brake lever through the caliper's cable guide and secure it with the cable fixing bolt. Ensure there is no slack in the cable when the brake is disengaged.
- Adjust Brake Pads: Position the R50T5 brake pads so they are parallel to the rim surface and make full contact when the brake is applied. Ensure the pads do not touch the tire. Tighten the pad fixing bolts securely.
- לעצט אַדזשאַסטמאַנץ: Squeeze the brake lever several times to seat the cable and pads. Check for proper lever feel and ensure both pads engage the rim simultaneously and evenly. Adjust cable tension as needed using the barrel adjuster on the caliper or lever.
אָפּעראַציע
The Shimano Tiagra BR-4700 brake caliper is designed for responsive and controlled stopping. To operate:
- Brake Application: Gently squeeze the brake lever on your handlebars. The Super SLR dual pivot mechanism will engage the brake pads against the wheel rim, initiating deceleration.
- מאָדולאַטיאָן: Apply pressure gradually to control braking force. Avoid sudden, hard braking, especially in wet conditions, to prevent skidding.
- Braking Power: This caliper provides increased braking power. Familiarize yourself with its response in a safe environment before riding in traffic or at high speeds.
וישאַלט
Regular maintenance ensures consistent performance and extends the lifespan of your brake caliper.
- רייניקונג: Periodically clean the caliper body, brake pads, and rim braking surfaces with a mild detergent and water. Remove any grit or road grime.
- Brake Pad Inspection: Inspect brake pads for wear indicators. Replace pads when they are worn down to the wear line or if they become hardened or contaminated. The one-piece pad design simplifies replacement.
- קאַבלע דורכקוק: Check the brake cable for fraying, corrosion, or kinks. Replace damaged cables promptly. Ensure the cable moves freely within its housing.
- Pivot Points: Apply a small amount of light grease to the caliper's pivot points to ensure smooth operation. Avoid getting grease on brake pads or rim surfaces.
- באָלט דריימאָמענט: Periodically check all mounting and fixing bolts for proper torque. Refer to Shimano's official technical documents for specific torque values.
טראָובלעשאָאָטינג
Address common issues with your brake caliper using the following guide:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Weak braking power | Worn pads, loose cable, contaminated pads/rim, incorrect pad alignment. | Replace pads, adjust cable tension, clean pads/rim, realign pads. |
| Brake squealing | Contaminated pads/rim, incorrect pad angle, loose caliper. | Clean pads/rim, adjust pad toe-in, tighten caliper mounting bolt. |
| Uneven pad wear | Misaligned caliper, bent rim, uneven pad contact. | Realign caliper, check rim trueness, adjust pad position. |
| Brake lever feels spongy | Stretched cable, worn housing, insufficient cable tension. | Replace cable/housing, increase cable tension. |
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נאָמען | Tiagra BR-4700 |
| טייל נומער | EBR4700AF87X |
| מאַטעריאַל | אַלומינום |
| קאָליר | גרוי |
| פּראָדוקט דימענסיעס (L x B) | 6.5" x 4.75" |
| פּונקט וואָג | 0.68 פונט (אומגעפער 0.31 ק"ג) |
| Projection Distance (Reach) | 49 Millimeters (mid-reach) |
| שעפּן אַטאַטשמענט מעקאַניזאַם | קורץ ציען |
| אַרייַנגערעכנט קאַמפּאָונאַנץ | Road Caliper Brakes (Front) |
וואָראַנטי אינפֿאָרמאַציע
The Shimano Tiagra BR-4700 Front Brake Caliper comes with a Limited Warranty. For specific details regarding coverage, duration, and claims procedures, please refer to the official warranty documentation provided with your purchase or visit the official SHIMANO webפּלאַץ.
שטיצן
For technical assistance, replacement parts, or further inquiries, please contact SHIMANO customer support. You can typically find contact information on the official SHIMANO website or through your authorized SHIMANO dealer.
אָנליין רעסורסן: Visit the official SHIMANO website for product manuals, technical specifications, and frequently asked questions.
פאַכמאַן הילף: If you are uncomfortable performing any installation or maintenance procedures, it is recommended to seek assistance from a certified bicycle mechanic.
