1. הקדמה
This manual provides essential information for the installation, operation, and maintenance of your PROFLO PF5114HE Jerrit Toilet Tank. This product is designed as a tank-only configuration, allowing you to pair it with a compatible toilet bowl. Please read these instructions thoroughly before proceeding with installation or use to ensure proper function and longevity of the product.
2. זיכערקייַט אינפֿאָרמאַציע
ביטע אָבסערווירן די פאלגענדע זיכערקייַט פּריקאָשאַנז:
- טראָגט שטענדיק פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט (PPE) ווי הענטשקעס און אויג-שוץ בעת דער אינסטאַלאַציע.
- האַנדלט מיט קעראַמישע קאָמפּאָנענטן מיט וואָרענונג צו פאַרמייַדן טשיפּינג אָדער ברייקידזש.
- זיכער מאַכן אַז אַלע וואַסער צושטעל רערן זענען אויסגעלאָשן איידער איר אָנהייבן די אינסטאַלאַציע.
- אויב איר זענט נישט זיכער וועגן קיין שריט, קאָנסולטירט אַ קוואַליפֿיצירטן פּלאָמבער.
- נישט צו שטארק אנציען די פארבינדונגען, ווייל דאס קען שאדן מאכן.
3. פּעקל אינהאַלט
The PROFLO PF5114HE Jerrit Toilet Tank package includes:
- PROFLO PF5114HE Jerrit Toilet Tank (White)
- Internal tank components (fill valve, flush valve, trip lever)
- Tank-to-bowl hardware (bolts, washers, nuts, gasket)
באַמערקונג: This product is a tank-only configuration. A toilet bowl and toilet seat are נישט אַרייַנגערעכנט און מוזן זיין פּערטשאַסט סעפּעראַטלי.
4. סעטאַפּ און ייַנמאָנטירונג
This section outlines the general steps for installing the PROFLO PF5114HE Jerrit Toilet Tank onto a compatible toilet bowl. Professional installation is recommended.
4.1 צוגרייטונג
- Ensure the water supply to the toilet area is turned off.
- Remove any existing toilet tank and clean the top surface of the toilet bowl where the tank will sit.
- Inspect the new tank for any visible damage.
4.2 Tank-to-Bowl Assembly
- Place the large rubber tank-to-bowl gasket over the flush valve opening on the underside of the tank. Ensure it is seated properly.
- Carefully align the tank with the bolt holes on the back of the toilet bowl.
- Insert the tank-to-bowl bolts through the tank and the bowl holes.
- From underneath the bowl, place washers and nuts onto the bolts. Hand-tighten initially.
- Alternately tighten the nuts with a wrench, ensuring the tank is level and stable. Do not overtighten to avoid cracking the ceramic.
פיגורע 1: פראָנט view of the PROFLO PF5114HE Jerrit Toilet Tank. This image shows the tank with its lid and flush lever, ready for installation onto a toilet bowl.
4.3 וואַסער צושטעלן קאַנעקשאַן
- Connect the flexible water supply line from the wall shut-off valve to the fill valve shank on the underside of the tank. Hand-tighten, then use a wrench for a final quarter-turn. Do not overtighten.
- Slowly turn on the water supply valve. Check for leaks at all connections.
- Allow the tank to fill. The fill valve will automatically shut off when the water level reaches the designated line inside the tank.
Figure 2: The PROFLO PF5114HE Jerrit Toilet Tank shown installed on a compatible toilet bowl. This illustrates the complete assembly of the tank and bowl.
5. אַפּערייטינג ינסטרוקטיאָנס
The PROFLO PF5114HE Jerrit Toilet Tank operates with a standard flush mechanism. To flush the toilet:
- Press down firmly on the flush lever located on the front of the tank.
- Hold the lever down briefly until the water in the tank begins to empty into the bowl.
- Release the lever. The tank will then refill automatically to the proper water level.
This tank is designed for a 1.28 gallons-per-flush (GPF) flow rate, ensuring efficient water usage.
6. וישאַלט
6.1 רייניקונג
- רייניקט די אויסערליכע זייט פון דעם טאנק מיט א ווייכן טוך און א מילד, נישט-אברייסיוו רייניגער.
- Avoid using harsh chemicals, abrasive pads, or strong detergents, as these can damage the finish.
- For internal cleaning, periodically inspect the fill valve and flush valve for mineral buildup. If necessary, turn off the water supply, drain the tank, and gently clean components with a soft brush.
6.2 קאָמפּאָנענט דורכקוק
- Regularly check the tank-to-bowl connection for any signs of leaks.
- Inspect the flapper or flush valve seal for wear. A worn seal can cause continuous running water.
- Ensure the fill valve is functioning correctly and the water level is set appropriately.
7. טראָובלעשאָאָטינג
דאָ זענען לייזונגען צו געוויינטלעכע פּראָבלעמען וואָס איר קענט באַגעגענען:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Tank leaks at base | Loose tank-to-bowl bolts, worn gasket | Gently tighten tank-to-bowl bolts. If leak persists, replace the tank-to-bowl gasket. |
| טואַלעט לויפט כסדר | Worn flapper/flush valve seal, misaligned fill valve, incorrect water level | Inspect and replace flapper/seal if worn. Adjust fill valve to ensure proper water level. Check for obstructions. |
| Weak or incomplete flush | Low water level, clogged siphon jet in bowl (not tank issue), flapper closing too quickly | Adjust water level higher in tank. Ensure flapper stays open long enough. Consult bowl manual for siphon jet cleaning. |
| Tank does not fill | Water supply off, clogged fill valve, faulty fill valve | Check water supply valve. Clean or replace fill valve if necessary. |
If these steps do not resolve the issue, please contact PROFLO customer support or a qualified plumber.
8. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נומער | PF5114HE |
| קאָליר | ווייַס |
| פּראָדוקט דימענשאַנז (ד רענטגענ וו רענטגענ ה) | 19" x 18" x 14" |
| מאַטעריאַל | Plastic (internal components), Ceramic (tank body) |
| פּונקט וואָג | 35.01 פונט |
| ייַנמאָנטירונג טיפּ | Floor Mounted (tank to bowl) |
| לויפן קורס | 1.28 gallons-per-flush (GPF) |
| UPC | 781889237168 |
9. וואָראַנטי און שטיצן
For warranty information, technical assistance, or to purchase replacement parts, please contact PROFLO customer support directly. Refer to the official PROFLO website or your purchase documentation for specific contact details and warranty terms applicable to your region.
When contacting support, please have your model number (PF5114HE) and date of purchase readily available.
