AEG 2193351018 Vacuum Cleaner Hose Instruction Manual

1. הקדמה

This manual provides essential information for the safe and effective use of your new AEG 2193351018 Vacuum Cleaner Hose. Please read these instructions carefully before installation and operation. Proper installation and maintenance will ensure optimal performance and extend the life of your product.

2. זיכערקייַט אינפֿאָרמאַציע

• Always disconnect the vacuum cleaner from the power supply before installing, removing, or cleaning the hose.
• Do not use the hose if it is damaged, kinked, or has visible wear. Replace immediately if damage is observed.
• Ensure the hose is securely attached to both the vacuum cleaner and any accessories to prevent loss of suction or accidental detachment.
• Keep the hose away from sharp objects, excessive heat, and open flames.
• This hose is designed for dry vacuuming only. Do not use with liquids or wet materials.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן און נישט געשעדיגט ביים אויספּאַקן.

• 1 x AEG 2193351018 Vacuum Cleaner Hose

4. סעטאַפּ און ייַנמאָנטירונג

Follow these steps to properly install the vacuum cleaner hose:

1. דיסקאַנעקט מאַכט: Ensure your vacuum cleaner is unplugged from the electrical outlet.
2. אַראָפּנעמען אַלטע שלאַנג (אויב אָנווענדלעך): If replacing an existing hose, carefully detach it from the vacuum cleaner's suction inlet and any attached accessories. Refer to your vacuum cleaner's manual for specific removal instructions.
3. Attach New Hose to Vacuum: Align the end of the AEG 2193351018 hose with the suction inlet on your vacuum cleaner. Push firmly until it clicks into place or feels securely seated. Some models may require a twisting motion.
4. צוטשעפּען אַקסעסעריז: Connect your desired vacuum cleaner attachments (e.g., floor nozzle, crevice tool) to the other end of the hose. Ensure a snug fit to maintain optimal suction.

Image showing the AEG 2193351018 vacuum cleaner hose, illustrating its flexible design and connection points for installation.

5. אַפּערייטינג ינסטרוקטיאָנס

Once the hose is securely installed and accessories are attached:

1. Plug your vacuum cleaner into a suitable electrical outlet.
2. Turn on the vacuum cleaner according to its operating instructions.
3. Begin vacuuming, guiding the hose and attached accessory over the surfaces to be cleaned.
4. Avoid excessive pulling or stretching of the hose to prevent damage.
5. After use, turn off and unplug the vacuum cleaner before detaching the hose or accessories.

6. וישאַלט

Regular maintenance helps maintain the hose's performance and longevity.

• רייניקונג: Periodically inspect the hose for any blockages. If a blockage is suspected, disconnect the hose from the vacuum and carefully remove any debris. You can use a long, blunt object to gently push through the hose.
• עקסטעריאָר רייניקונג: Wipe the exterior of the hose with a damp שטאָף. דו זאלסט נישט נוצן האַרב קעמיקאַלז אָדער אַברייסיוו קלינערז.
• סטאָרידזש: Store the hose in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly coiling the hose during storage.

7. טראָובלעשאָאָטינג

If you experience issues with your vacuum cleaner hose, consider the following:

• פארלוסט פון זויגונג:
  • Check for blockages within the hose.
  • Ensure the hose is securely attached to both the vacuum cleaner and the accessory.
  • Inspect the hose for any cracks, holes, or damage that could cause air leaks.
• Hose Detaches:
  • Verify that the hose is fully inserted and locked into the vacuum cleaner's inlet.
  • Ensure accessories are firmly attached to the hose end.

If problems persist, consult your vacuum cleaner's instruction manual or contact AEG customer support.

8. ספּעסאַפאַקיישאַנז

9. קאַמפּאַטאַבילאַטי

The AEG 2193351018 Vacuum Cleaner Hose is compatible with a range of vacuum cleaner models. It replaces original part numbers 1130043019, 1130047036, און 2192096010.

Compatible AEG-Electrolux Models:

• AV1121, AV1131, AV1160, AVC1110, AVC1120, AVC1130, AVC1131, AVC1170, AVC1171
• AVQ210, AVQ2101, AVQ2102, AVQ2103, AVQ2104, AVQ2107, AVQ2108, AVQ2112, AVQ2113, AVQ2125
• AVQ2126, AVQ2127, AVQ2128, AVQ2131, AVQ2134, AVQ2135, AVQ2136, AVQ2138, AVQ2139, AVQ2140, AVQ2141

Compatible Electrolux Models:

• ZV 1020, ZV 1030, ZV1020, ZV1030, ZVQ2100, ZVQ2101

Compatible Tornado Models:

• TO4605N, TO4610N, TO6510, TO6510N, TO6520, TO6520N, TO6530, TO6530N

Compatible Volta Models:

• ו4420, ו4430, ו4441, ו4630

10. וואָראַנטי און שטיצן

For information regarding warranty coverage or technical support, please refer to the documentation provided with your original vacuum cleaner or visit the official AEG website. For specific inquiries about this replacement hose, contact AEG customer service directly.