1. הקדמה
Welcome to the user manual for your new Gingko Design Cube Alarm Clock. This innovative and stylish alarm clock is designed to provide time, date, and temperature information in a sleek, wood-effect block with an intelligent LED display. Its unique sound-activated feature allows the display to appear with a simple click of your fingers or a gentle tap, ensuring a dark room at night while providing instant access to information when needed.
שליסל פֿעיִקייטן אַרייַננעמען:
- Sound-activated LED display (time, date, temperature)
- Alarm setting with clever snooze function
- Weekday or weekend alarm setting options
- Compact and minimalist design
2. סעטאַפּ
2.1 Powering Your Clock
The Gingko Cube Alarm Clock can be powered by batteries or via a constant power source using the included USB cable.
- ייַנמאָנטירונג פון באַטאַרייע: The clock requires 1 Lithium Polymer battery (not included). Open the battery compartment cover located on the back of the clock. Insert the battery, ensuring correct polarity. Close the cover securely.
- USB Power: For continuous display and to avoid frequent battery changes, connect the provided USB cable to the DC5V port on the back of the clock and plug the other end into a compatible USB power adapter (not included) or a powered USB port.
בילד: הינטערשטע view of the Gingko Cube Alarm Clock, illustrating the battery compartment with AAA batteries inserted and the control buttons above it. The battery cover is shown detached to the right.
2.2 Initial Settings (Time, Date, Alarm)
The control buttons (SET, UP, DOWN, V/S, RESET) are located on the back of the clock. Specific button functions may vary slightly by firmware version, but the general process is as follows:
- אַקסעס סעטטינגס: דריקן און האַלטן די שטעלן קנעפּל צו אַרייַן די באַשטעטיקן מאָדע.
- Navigating Options: ניצן די UP און אַראָפּ buttons to adjust values or cycle through options (e.g., 12/24-hour format, time, date, temperature unit).
- באַשטעטיקן סעטטינגס: דרוק די שטעלן button again to confirm a setting and move to the next option.
- אַלאַרם סעטאַפּ: Within the setting mode, you will find options to set up to three alarms (A1, A2, A3). You can enable/disable alarms and set specific times. Some models allow setting alarms for weekdays only or all days.
- סנוז פונקציע: When an alarm sounds, pressing any button (often the אַראָפּ or V/S button) will activate the snooze function, delaying the alarm for a short period.
3. Operating Your Clock
3.1 אַרויסווייַזן מאָדעס
The clock can cycle through different display modes: time, date, and temperature. By default, it often alternates between these. You can typically set it to display time only if preferred.
Image: The Gingko Cube Alarm Clock in white, showcasing its LED display showing the current time (15:19). The minimalist design highlights the digital numbers appearing to float on the wood-effect surface.
Image: The Gingko Cube Alarm Clock displaying the temperature (19°C). This view emphasizes the clean lines and compact size of the clock, suitable for a desk or bedside table.
3.2 קלאַנג אַקטיוואַציע
When the room is quiet, the display automatically switches off to conserve power and avoid light disturbance. To activate the display, simply:
- Click your fingers
- Clap your hands
- Gently tap the clock or the surface it rests on
The display will light up, showing the current information, and then turn off again after a few seconds of silence.
3.3 Alarm Functionality
The alarm can be set for specific times and offers a clever snooze function. You can configure the alarm to sound on weekdays or across all days, depending on your preference. When the alarm sounds, press any button to activate snooze or press and hold a specific button (refer to your clock's specific instructions) to turn off the alarm for the day.
4. וישאַלט
4.1 רייניקונג
To maintain the appearance of your Gingko Cube Alarm Clock, wipe it gently with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the wood-effect finish or internal components.
4.2 באַטערי פאַרבייַט
If using batteries, replace them when the display becomes dim or the clock stops responding. Refer to section 2.1 for battery installation instructions. Always dispose of used batteries responsibly according to local regulations.
5. טראָובלעשאָאָטינג
If you encounter issues with your Gingko Cube Alarm Clock, please refer to the following common problems and solutions:
| פּראָבלעם | מעגלעך סיבה / לייזונג |
|---|---|
| דער עקראַן איז אויסגעלאָשן אָדער טונקל. |
|
| Time/Date resets when power is lost. | This is expected behavior if the clock loses power (e.g., batteries removed or USB power disconnected). You will need to reset the time and date after power is restored. |
| Cannot change alarm sound or volume. | The Gingko Cube Alarm Clock typically has a fixed alarm sound and volume. These settings are generally not user-adjustable. |
| קנעפּלעך טאָן ניט ריספּאַנד. | Ensure the clock has sufficient power. Try a soft reset by briefly disconnecting and reconnecting power. If issues persist, contact customer support. |
6. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | גינקאָ |
| מאָדעל נומער | GK08W13 |
| קאָליר | ווייַס |
| מאַטעריאַל | Wood (Others Wood) |
| פּראָדוקט דימענשאַנז | 2.5"ברייט x 2.5"היך |
| פּונקט וואָג | 0.007 אונס (בעערעך 0.2 גראַמז) |
| מאַכט מקור | Battery Powered (1 Lithium Polymer battery required) or USB DC5V |
| ווייַז טיפּ | דיגיטאַל געפירט |
| ספּעציעלע פֿעיִקייטן | Alarm, Snooze, Sound Activation, Temperature Display |
| אָפּעראַציע מאָדע | עלעקטריקאַל |
7. וואָראַנטי און שטיצן
For information regarding product warranty, please refer to the documentation provided at the time of purchase or contact your retailer. Gingko products typically come with a manufacturer's warranty covering defects in materials and workmanship.
If you require further assistance or have questions not covered in this manual, please contact Gingko customer support through their official website or the retailer from whom you purchased the product. Please have your model number (GK08W13) and purchase details ready when contacting support.
