WFLY X9 RC Car Radio Instruction Manual

1. הקדמה

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your WFLY X9 RC Car Radio system. The WFLY X9 is a high-performance 2.4GHz 9-channel radio transmitter designed for precise control of various RC vehicles, including cars, boats, tanks, and robots. It features advanced technology such as a capacitive touch screen, GPS support, and extensive model memory.

2. פּראָדוקט איבערview

2.1 שליסל פֿעיִקייטן

• 3.5-inch capacitive touch color screen for intuitive control.
• 9-channel RC radio with a compact RG206S receiver.
• External foldable antenna and LED RGB strip light.
• Supports GPS and external Gyro functions, ideal for racing cars and stunt cars.
• 40 models memory storage and MOA (Motor On Axle) function for crawlers.
• Voice broadcast support.
• USB online upgrade capability.
• Type-C charging for 1S LiPo battery.

2.2 וואָס איז אין דער קעסטל

• WFLY X9 Transmitter
• RG206S Receiver

2.3 פּראָדוקט קאַמפּאָונאַנץ

Figure 1: The WFLY X9 RC Transmitter and its accompanying RG206S Receiver. The transmitter features a pistol-grip design with a steering wheel and a screen on top, while the receiver is a small, rectangular unit with multiple ports.

פיגור 2: א דעטאלירטע view of the RG206S Receiver, showing its channel ports (1-6), external voltage detection port (Ext. Volt), GPS port, and W.BUS port. A 'SET' button is also visible for binding and configuration.

Figure 3: The 3.5-inch capacitive touch screen interface of the WFLY X9 transmitter. The screen displays various parameters such as timer, RX voltagE, פונדרויסנדיק וואָלtage, speed, and channel outputs (CH1, CH2, CH3). Menu, Lock, and User menu buttons are visible on the screen.

Figure 4: Illustration of the servo channel limit function. This feature allows setting the servo angle to prevent mechanical damage by ensuring servo output remains within the mechanical travel limits of the connected component.

3. סעטאַפּ

3.1 טראַנסמיטער באַטערי ינסטאַלירונג

1. Locate the battery compartment on the bottom of the WFLY X9 transmitter.
2. עפענען די באַטאַרייע אָפּטייל דעקן.
3. Insert either a 1S LiPo battery or four AA dry batteries, ensuring correct polarity.
4. פאַרמאַכן די באַטאַרייע אָפּטייל דעקן סיקיורלי.

Note: The transmitter supports a working voltagדי קייט פון 3.5 וו צו 6.0 וו.

3.2 ופנעמער קאַנעקשאַן

1. Connect the RG206S receiver to your RC vehicle's electronic speed controller (ESC) and servos.
2. Ensure that the channels (CH1-CH6) on the receiver correspond to the correct functions (e.g., steering, throttle) on your vehicle.
3. If using GPS or external voltage detection, connect the respective modules to the 'GPS' and 'Ext. Volt' ports on the receiver.

Note: The receiver supports a working voltagדי קייט פון 3.5 וו צו 9.0 וו.

3.3 ביינדינג פּראָצעדור

To establish communication between the transmitter and receiver, a binding process is required:

1. קער אַוועק ביידע די טראַנסמיטער און ופנעמער.
2. Press and hold the 'SET' button on the RG206S receiver while powering it on. The receiver's LED indicator will flash rapidly, indicating it is in binding mode.
3. Turn on the WFLY X9 transmitter.
4. Navigate to the binding menu on the transmitter's touch screen (refer to the on-screen interface for specific steps).
5. Initiate the binding process from the transmitter.
6. Once binding is successful, the receiver's LED indicator will turn solid, and the transmitter will display a successful connection message.
7. Turn off both devices and then power them on normally to confirm the connection.

4. אָפּעראַציע

4.1 יקערדיק קאָנטראָלס

• סטירינג ראָד: Controls the left/right direction of your RC vehicle.
• גערגל טריגער: ציען צו באַשנעלערן פאָרווערטס, דריקן צו ברעמזן אָדער צוריקגיין.
• טרימז: Adjust the neutral position of steering and throttle channels for fine-tuning.
• D/R (Dual Rate): Adjusts the maximum throw of steering or other channels.

4.2 טאָוטש סקרין נאַוויגאַציע

The WFLY X9 features a 3.5-inch capacitive touch screen for easy navigation and configuration. Tap icons and menus to access various settings:

• הויפּט פאַרשטעלן: Displays real-time telemetry data such as battery voltage (transmitter and external), signal strength, and timer.
• מעניו קנעפּל: גייט אריין אין הויפּט סעטטינגס מעניו.
• באַניצער מעניו: Customizable shortcuts for frequently used functions.
• מאָדעל סעלעקציע: Select from up to 40 stored models, each with its own unique settings.

4.3 אַוואַנסירטע פאַנגקשאַנז

• Program Mix: Configure up to 5 custom mixes for complex control scenarios (e.g., 4-wheel steering).
• קול בראָדקאַסט: Enable voice prompts for telemetry data or system alerts.
• GPS שטיצע: When connected to a compatible GPS module, the system can display real-time speed detection.
• External Gyro Function: Enhance stability and control for racing or stunt applications.
• Channel Limit: Protect your servos and mechanical components by setting maximum travel limits for each channel.

5. וישאַלט

5.1 אויפלאָדן דעם טראַנסמיטער

If using a 1S LiPo battery, charge the transmitter via the Type-C USB port. Connect a standard USB charger (not included) to the Type-C port on the transmitter. The screen will indicate charging status.

5.2 רייניקונג און סטאָרידזש

• Wipe the transmitter and receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Store the system in a cool, dry place, away from direct sunlight and extreme temperatures (-10℃ to +60℃ operating temperature).
• Remove batteries from the transmitter if storing for extended periods to prevent leakage.

5.3 Firmware אַפּגרייד

The WFLY X9 supports USB online firmware upgrades. Visit the official WFLY website for the latest firmware versions and instructions. Connect the transmitter to your computer via a USB cable to perform the upgrade.

6. טראָובלעשאָאָטינג

6.1 פּראָסט ישוז

7. ספּעסאַפאַקיישאַנז

7.1 Transmitter (WFLY X9)

• ארבעטן חלקtage: 3.5V~6.0V (1S LiPo battery / 4×AA dry battery)
• אַרבעט קראַנט: 260~400מאַ
• Frequency Hopping: פהסס
• מאָדולאַטיאָן: לאָראַ
• אַפּפּליקאַטיאָן: RC cars, boats, tanks, robots, etc.
• רעזאלוציע: 4096
• אָפטקייַט באַנד: 2.4 גהז (צוויי-וועג)
• טראַנסמיסיע מאַכט: ≤100mw
• קייט: >600m (ideal conditions)
• אַפּערייטינג טעמפּעראַטור: -10 ℃ צו +60 ℃
• Simulator Interface: 3.5mm (PPM)
• סטאָרידזש: 40 מאָדעלס זכּרון
• Program Mix: 5 מאָדעלס
• קול בראָדקאַסט: שטיצן
• טשאַרדזשינג: Support 1S LiPo battery (Type C)
• שפּראַך: ענגליש
• אַפּגרייד: USB online upgrade
• סערוואָ: שטיצן
• ווייַז: 3.5” 480*320 capacitive touch screen
• דימענסיעס: Approximately 33.5 x 22.0 x 12.5 mm (Transmitter body, not including wheel/handle)
• וואָג: 318ג

7.2 Receiver (RG206S)

• מאָדעל נאָמען: RG206S
• טשאַנאַלז: 6 channels (PWM)
• אַרבעט קראַנט: 95מאַ
• אָפטקייַט באַנד: 2.4GHz (two-way transmission)
• ארבעטן חלקtage: 3.5 וו ~ 9.0 וו
• מאָדולאַטיאָן: לאָראַ
• גפּס: Support speed detection
• אַפּפּליקאַטיאָן: RC cars, boats, tanks, robots, etc.
• רעזאלוציע: Full channel 4096
• אַפּערייטינג טעמפּעראַטור: -10 ℃ צו +60 ℃
• פונדרויסנדיק וולtage דיטעקשאַן: דק 1 ~ 36 וו
• PPM: Support 180/270°
• W.BUS: Support S.BUS
• אַפּגרייד: USB online upgrade
• דימענסיעס: 33.6 X 22.3 X 12.3 מם
• וואָג: 7.6ג

7.3 גשמיות דימענשאַנז

• Product Dimensions (Transmitter): 8 x 6.5 x 4.7 inches (approximate, from product specifications)
• Item Weight (Total): 1.54 פונט

8. וואָראַנטי און שטיצן

Specific warranty information for the WFLY X9 RC Car Radio is not provided in this manual. Please refer to the product packaging or the retailer's webפּלאַץ פֿאַר וואָראַנטי דעטאַילס.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact the seller or the official WFLY customer support channels. Keep your purchase receipt as proof of purchase for any warranty claims.