1. הקדמה
This manual provides essential information for the proper installation, function, and maintenance of the DeVilbiss 803303 Fluid Needle. This component is a replacement part specifically designed for use with DeVilbiss SRiPro Spot Repair Guns, ensuring optimal performance and fluid delivery for precise paint applications.
2. ינסטאַלירונג
Proper installation of the fluid needle is crucial for the correct operation of your SRiPro spray gun. Always ensure the spray gun is disconnected from its air supply and depressurized before beginning any maintenance or part replacement.
- זיכערקייַט ערשטער: Disconnect the spray gun from the air supply and empty any remaining fluid from the cup. Wear appropriate personal protective equipment (PPE), including gloves and eye protection.
- דיסאַססעמבלי: Carefully remove the air cap, fluid tip, and existing fluid needle from the spray gun body. Refer to your SRiPro spray gun's primary manual for detailed disassembly instructions.
- דורכקוק: Inspect the spray gun body and associated components for any damage or wear. Clean any residue from the fluid passages.
- Install New Needle: Insert the DeVilbiss 803303 Fluid Needle into the rear of the spray gun body, ensuring it slides smoothly into place.
- ריאַסעמבאַלינג: Reattach the fluid tip and air cap. Ensure all components are securely tightened, but do not overtighten, as this can cause damage.
- טעסט: Reconnect the spray gun to the air supply and perform a test spray with a suitable cleaning solution or paint to verify proper function and check for leaks.
Image 1: The DeVilbiss 803303 Fluid Needle. This component is made of stainless steel and is designed to fit 1.2 fluid tips in SRiPro Spot Repair Guns.
3. פֿונקציע
The DeVilbiss 803303 Fluid Needle is a critical component in the fluid delivery system of the SRiPro Spot Repair Gun. It controls the flow of paint or other coatings from the fluid cup to the fluid tip. When the trigger of the spray gun is pulled, the needle retracts, allowing fluid to pass through the tip and atomize with the air stream, creating the spray pattern. This specific needle is designed to work with 1.2 fluid tips, ensuring precise material delivery for spot repair applications.
4. וישאַלט
Regular maintenance of the fluid needle extends its lifespan and ensures consistent spray gun performance.
- רייניקונג: After each use, thoroughly clean the fluid needle along with the rest of the spray gun components. Use appropriate cleaning solvents recommended for your paint type. Remove the needle and wipe it clean, ensuring no paint residue remains, especially around the tip.
- דורכקוק: Periodically inspect the fluid needle for signs of wear, bending, or damage. A worn or bent needle can lead to poor spray patterns, drips, or leaks.
- שמירן: Apply a small amount of spray gun lubricant to the needle packing area as recommended by the SRiPro spray gun manual to ensure smooth operation and prevent premature wear.
- סטאָרידזש: Store the fluid needle and spray gun in a clean, dry environment when not in use.
5. טראָובלעשאָאָטינג
If you experience issues with your SRiPro spray gun, the fluid needle may be a contributing factor. Here are some common problems and potential solutions:
| פּראָבלעם | Possible Cause (Fluid Needle Related) | לייזונג |
|---|---|---|
| Poor Spray Pattern / Spitting | Bent or damaged fluid needle tip; paint residue on needle. | Inspect needle for damage; clean thoroughly. Replace if damaged. |
| Fluid Leakage from Tip | Fluid needle not seating properly; worn needle packing; damaged needle. | Ensure needle is fully seated; check and replace needle packing; replace needle if damaged. |
| קיין פליסיק לויפן | Fluid needle stuck or obstructed by dried paint. | Disassemble and thoroughly clean the needle and fluid passages. |
For comprehensive troubleshooting, refer to the complete instruction manual for your DeVilbiss SRiPro Spot Repair Gun.
6. ספּעסאַפאַקיישאַנז
Key specifications for the DeVilbiss 803303 Fluid Needle:
- מאָדעל נומער: 803303
- קאַמפּאַטאַבילאַטי: DeVilbiss SRiPro Spot Repair Guns
- Fluid Tip Compatibility: Designed for 1.2 fluid tips
- מאַטעריאַל: ומבאַפלעקט שטאָל
- פאַבריקאַנט: דעווילביס
- נומער וואָג: Approximately 4.84 pounds (Note: This weight may refer to shipping weight or packaging, as the needle itself is much lighter.)
- פּראָדוקט דימענשאַנז: Approximately 5 x 5 x 5 inches (Note: This dimension may refer to packaging, as the needle itself is much smaller.)
- ASIN: B00GRVFOZW
- ערשטער דאַטע בנימצא: 19 נאוועמבער 2013
7. וואָראַנטי & שטיצן
For specific warranty information regarding the DeVilbiss 803303 Fluid Needle, please refer to the documentation provided with your original purchase or contact DeVilbiss directly. Warranty terms typically cover manufacturing defects.
For technical support, replacement parts, or further assistance, please contact DeVilbiss customer service or an authorized DeVilbiss dealer. You can often find contact information on the official DeVilbiss webזייטל אדער דורך אייער פּראָדוקט'ס אָריגינעלער פּאַקאַדזשינג.
Note: This fluid needle is a consumable part and its lifespan is dependent on usage, maintenance, and the types of materials sprayed.
