Weiser Augusta/Troy Single Cylinder Handleset

1. הקדמה

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Weiser Augusta/Troy Single Cylinder Handleset. This handleset is designed for residential and light commercial applications, offering security and durability with an ANSI Grade 2 rating. Please read all instructions carefully before beginning installation to ensure proper function and safety.

2. זיכערקייַט אינפֿאָרמאַציע

• Always wear appropriate safety gear, such as safety glasses, during installation.
• האַלטן קליין טיילן אַוועק פון קינדער צו פאַרמייַדן טשאָוקינג כאַזערדז.
• Use only the tools specified or recommended in this manual.
• Ensure all screws are tightened securely, but do not overtighten, as this may damage components.
• If you are unsure about any part of the installation process, consult a qualified locksmith or professional installer.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:

• Exterior Handleset Assembly (Augusta/Troy Trim)
• Interior Knob Trim
• דעדבאָלט לאַטש
• פרילינג לאַטש
• Strike Plates (Full Lip)
• מאַונטינג סקרוז
• שליסלען
• אינסטאַלאַציע מוסטער (אויב אַרייַנגערעכנט)

4. ינסטאַלירונג

מכשירים פארלאנגט: Phillips head screwdriver, tape measure, pencil, drill (optional for new installations).

פיגורע 1: איבערview of the Weiser Augusta/Troy Single Cylinder Handleset components, including the exterior handle, interior knob, and associated hardware.

1. צוגרייטן די טיר: Ensure your door has the correct bore holes and backset. This handleset is designed for doors with a 2-1/8 inch cross bore and an adjustable backset of 2-3/8 inches or 2-3/4 inches.
2. אינסטאַלירן די דעדבאָלט לאַטש: Insert the deadbolt latch into the edge bore hole, ensuring the bolt faces the correct direction. Secure it with the provided screws.
3. Install the Spring Latch: Insert the spring latch into the lower edge bore hole, ensuring the bevel faces the door frame. Secure it with the provided screws.
4. אינסטאַלירן די אויסערלעכע הענטל-סעט: Place the exterior handleset assembly onto the door, aligning the posts with the bore holes.
5. Install the Interior Knob Trim: Attach the interior knob trim to the exterior handleset, ensuring the spindle engages with the spring latch mechanism. Secure with the long mounting screws, tightening evenly.
6. טעסט אָפּעראַציע: Before closing the door, test the deadbolt and spring latch mechanisms to ensure smooth operation. The deadbolt should extend and retract fully with the key from either side. The lower trim is non-locking.
7. אינסטאַלירן סטרייק פּלאַטעס: Mark and chisel out recesses for the strike plates on the door frame, aligning them with the latches. Secure the strike plates with the provided screws.

5. אָפּעראַציע

• Locking the Deadbolt: Insert the key into the exterior cylinder and turn to extend the deadbolt. From the interior, turn the thumbturn to extend the deadbolt.
• Unlocking the Deadbolt: Insert the key into the exterior cylinder and turn to retract the deadbolt. From the interior, turn the thumbturn to retract the deadbolt.
• Operating the Lower Latch: The lower handle operates a spring latch for entry and exit. This latch does not lock and is always accessible from both sides.

6. וישאַלט

• רייניקונג: Clean the handleset with a soft, damp שטאָף. פֿאַרמײַדט אַברייסיוו רייניגער, סאָלווענטן, אָדער שטרענגע כעמיקאַלן, ווײַל די קענען שאַטן די ענדיקונג.
• שמירן: טראָגט אויף פון צייט צו צייט אַ קליינע מאָס גראַפיט-שמירעכץ אָדער אַ סיליקאָן-באַזירטן שפּריץ אויף די שליסל-לאָך און אינעווייניקסטע מעכאַניזמען צו ענשור אַ גלאַטן אָפּעראַציע. ניצט נישט קיין בוימל-באַזירטע שמירעכץ.
• דורכקוק: Regularly check all screws for tightness and ensure the handleset operates smoothly. Tighten any loose screws as needed.

7. טראָובלעשאָאָטינג

• Handleset is stiff or difficult to operate:
  • Check if mounting screws are overtightened. Loosen slightly if necessary.
  • Apply lubricant to the latch and cylinder mechanisms.
  • Ensure the door is properly aligned and not binding against the frame.
• Deadbolt does not extend or retract fully:
  • Verify the strike plate alignment. Adjust if the deadbolt is hitting the frame or strike plate.
  • Check for obstructions in the door frame.
• Key is difficult to insert or turn:
  • Apply graphite lubricant to the keyway.
  • Ensure the key is not bent or damaged.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

Weiser products are manufactured to the highest standards and are backed by a limited lifetime warranty on mechanical components and finish. For detailed warranty information, technical support, or to purchase replacement parts, please visit the official Weiser webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט. האלט אייער באווייז פון קויפן פאר גאראנטיע טענות.