Rode VideoMic Camera-Mount Shotgun Microphone User Manual

פּראָדוקט איבערview

The RODE VideoMic is a professional-grade shotgun microphone designed specifically for use with high-quality digital video cameras. It delivers broadcast and studio sound quality with low noise and an unusually wide bandwidth for its compact size. The microphone is ultra-lightweight yet rugged due to its ABS construction.

שליסל פֿעיִקייטן אַרייַננעמען:

• Broadcast and studio sound quality
• Rugged reinforced ABS construction
• Two-step high-pass filter (flat or 80 Hz)
• Integrated Rycote Lyre shock mounting system for excellent isolation from external vibrations
• 9V battery operation with low battery LED status indicator
• Condenser transducer and low noise circuitry
• נידעריק האַנדלינג ראַש
• Includes high-density windscreen
• Integrated camera-shoe mount
• 1/8" (3.5mm) stereo mini-jack connector

סעטאַפּ גייד

1. באַטאַרייע ייַנמאָנטירונג

The VideoMic requires a standard 9V battery (not included) for operation. Locate the battery compartment on the microphone unit. Open the compartment and insert the 9V battery, ensuring correct polarity. Close the compartment securely. The low battery LED indicator will illuminate when the battery level is low, signaling it's time for replacement.

2. מאָנטירן דעם מיקראָפאָן

The VideoMic is designed to attach to any camcorder or DSLR with a standard camera-shoe fitting. Slide the microphone's integrated mount onto your camera's hot shoe or cold shoe. Secure the microphone in place by tightening the locking wheel or mechanism on the mount.

Image: The Rode VideoMic with its red Rycote Lyre shock mount attached to the top hot shoe of a DSLR camera. The microphone is positioned forward, ready for use.

3. Connecting to Your Camera

Connect the coiled 1/8" (3.5mm) stereo mini-jack cable from the VideoMic to the microphone input jack on your digital video camera or DSLR. Ensure the connection is secure to prevent audio dropouts.

Image: The Rode VideoMic showing its main body, foam windshield, red Rycote Lyre shock mount, and the coiled 3.5mm audio cable ready for connection.

אַפּערייטינג ינסטראַקשאַנז

1. פּאָווערינג אויף / אויסגעלאשן

Locate the power switch on the microphone unit. Slide it to the 'ON' position to activate the microphone. A green LED indicator will confirm it is powered on. Remember to switch it 'OFF' when not in use to conserve battery life.

2. הויך-פּאַס פילטער (HPF)

The VideoMic features a two-step high-pass filter (HPF) with 'flat' and '80 Hz' settings. The 'flat' setting captures the full frequency range. The '80 Hz' setting reduces low-frequency noise such as rumble from air conditioners, traffic, or wind, which can be beneficial in noisy environments. Select the appropriate setting based on your recording conditions.

3. לעוועל קאָנטראָל

The microphone includes a two-stage level control. Adjust this control to optimize the audio input level for your camera, preventing distortion when recording loud sound sources. Refer to your camera's audio meters to set an appropriate recording level, typically aiming for peaks around -6dB to -3dB.

4. Using the Windscreen

For outdoor recording or in windy conditions, attach the included foam windscreen over the microphone capsule. This significantly reduces wind noise, improving audio clarity and preventing unwanted artifacts in your recordings.

וישאַלט

To ensure the longevity and optimal performance of your Rode VideoMic, keep it clean and free from dust. Use a soft, dry cloth for cleaning. Store the microphone in a protective case or bag when not in use to prevent physical damage. Regularly check the Rycote Lyre shock mount for any signs of wear and tear, as these are crucial for vibration isolation. Replace the 9V battery as soon as the low battery indicator illuminates to avoid interruption during recording sessions.

טראָובלעשאָאָטינג

• קיין אַודיאָ:
  • Ensure the microphone is powered on (green LED should be lit).
  • Check that the 9V battery is not depleted; replace if necessary.
  • Verify that the 3.5mm cable is securely connected to both the microphone and your camera's microphone input.
  • Confirm your camera's audio settings are configured to receive external microphone input.
• פאַרקרימט אַודיאָ:
  • Adjust the microphone's level control and your camera's audio input gain. If recording loud sources, ensure the level control is set appropriately to prevent clipping.
• איבערגעטריבענע ווינט ראַש:
  • Ensure the foam windscreen is properly installed over the microphone.
  • Utilize the 80 Hz high-pass filter setting to reduce low-frequency wind rumble.
• האַנדלינג ראַש:
  • The Rycote Lyre shock mount is designed to minimize handling noise. Ensure the microphone is securely seated in the mount and avoid excessive movement of the camera during recording.

If issues persist, refer to the official user manual PDF or contact Rode support for further assistance.

טעכניש ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

The Rode VideoMic comes with an exceptional 10-year warranty, backed by Rode's international service and support network, ensuring complete peace of mind.

For detailed information, please refer to the official באַניצער מאַנואַל (פּדף) אָדער באַזוכן די Rode Store פֿאַר ווייַטער הילף.

לעגאַל אָפּלייקענונג: Unit in brand new condition with original box.