1. פּראָדוקט איבערview
The Nice Mindy TT1N is a control logic unit designed for the precise control of 230V motors used in applications such as blinds and roller shutters. This unit features an integrated radio receiver, simplifying installation and programming, and offers compatibility with various Nice remote controls and external sensors.
שליסל פֿעיִקייטן:
- Controls motors up to 500 W.
- Stores up to 30 stations (remote controls).
- Adjustable operating time from 4 seconds to 4 minutes.
- סאָליד דימענשאַנז: 98 X 26 X 20 מם.
- פאַבריצירט אין איטאליע.
Figure 1: Nice Mindy TT1N Control Logic Unit. This image shows the compact white control unit with two white cables extending from one end. The unit has clear labeling for electrical connections and product specifications, including "Nice TT1N", "230V 50Hz", "Imax = 2,2A", "Pmax = 500W/400VA", and "IP55". A wiring diagram is also visible on the unit's surface.
2. סעטאַפּ און ייַנמאָנטירונג
The Nice Mindy TT1N is designed for simple installation and programming. Ensure all power is disconnected before proceeding with any wiring.
2.1. וויירינג דיאַגראַמע
Refer to the diagram printed on the unit for correct electrical connections. The unit is designed for 230V 50Hz power supply.
פיגורע 2: דעטאַילעד view of the Nice Mindy TT1N wiring diagram. The diagram shows terminals for motor connection (M, COM, Ground) and power supply (L, N). Numbered terminals (1-7) are also visible, indicating connections for control inputs and accessories. This diagram is crucial for proper installation.
- ל (ליניע) און N (נייטראַל): Connect to the 230V AC power supply.
- M (Motor) און קאַם (פּראָסט): Connect to the motor's power input.
- ערד סימבאָל: Connect to the electrical ground.
- טערמינאַלס 1-7: These terminals are used for various control inputs and accessories, such as remote control programming and external sensor connections. Consult the full product manual for specific functions of each terminal.
2.2. פּראָגראַמירן ווײַטקאָנטראָלן
The unit features an integrated 433 MHz radio receiver. It is compatible with Nice Way, Nice Ergo, Nice Plano, and Nice Flor-S remote controls. Refer to your remote control's manual for specific pairing instructions. Generally, programming involves pressing a button on the control unit and then a button on the remote control to establish communication.
2.3. Sensor Association
The TT1N can be associated with external sun, wind, and rain sensors (not supplied). These sensors allow for automated operation of the motor based on environmental conditions. Consult the sensor's manual and the TT1N's detailed programming guide for integration steps.
3. אַפּערייטינג ינסטרוקטיאָנס
Once installed and programmed, the Nice Mindy TT1N allows for convenient control of your motor.
3.1. יקערדיק אָפּעראַציע
Use your paired Nice remote control to operate the connected motor. Typically, there are buttons for 'Up', 'Down', and 'Stop'.
- דרוק די 'Up' button to raise the blind/shutter.
- דרוק די 'Down' button to lower the blind/shutter.
- דרוק די 'Stop' button to halt movement at any point.
3.2. Automatic Operation (with Sensors)
If external sensors are connected and configured, the system can operate automatically:
- Sun Sensor: May automatically lower blinds/shutters when intense sunlight is detected.
- ווינט סענסאָר: May automatically raise blinds/shutters to protect them during high winds.
- רעגן סענסאָר: May automatically close windows or retract awnings during rain.
4. וישאַלט
The Nice Mindy TT1N is designed for long-term reliability and requires minimal maintenance.
- רייניקונג: ווישט אָפּ דעם אויסערן טייל פונעם אַפּאַראַט מיט אַ ווייכן, טרוקענעם שטאָף פון צייט צו צייט. ניצט נישט קיין שרײַבנדיקע רייניגערס אדער סאָלווענטן.
- דורכקוק: Annually inspect wiring connections to ensure they are secure and free from damage.
- ענוויראָנמענטאַל שוץ: Ensure the unit remains within its specified IP55 rating environment, protected from excessive dust and water jets.
5. טראָובלעשאָאָטינג
If you encounter issues with your Nice Mindy TT1N, consider the following common solutions:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Motor does not respond to remote. | Remote control not paired or battery low. Power supply issue. | Re-pair the remote control. Check remote battery. Verify power to the TT1N unit. |
| דער מאָטאָר שטעלט זיך אָפּ אומגעריכט. | Overload protection activated. Sensor input. | Check motor for obstructions. Verify sensor readings (e.g., high wind). Allow unit to cool if overloaded. |
| די איינהייט גייט נישט אן. | No power supply. Incorrect wiring. | Check main power supply. Inspect L and N connections. |
If problems persist, contact qualified technical support.
6. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | NICE |
| מאָדעל | TT1N |
| מאַכט צושטעלן | 230 וו 50 הז |
| Max Current (Imax) | 2.2 א |
| מאַקסימום מאַכט (פּמאַקס) | 500 וו / 400 וואַ |
| שוץ רייטינג | IP55 |
| דימענסיעס (L X W X H) | 98 x 26 x 20 mm (approx. from package dimensions) |
| ראַדיאָ פרעקווענסי | 433 מהז |
| Remote Control Memory | ביז 30 סטאַנציעס |
| Operating Time Programming | 4 seconds minimum to 4 minutes maximum |
7. וואָראַנטי און שטיצן
For warranty information, please refer to the documentation provided with your purchase or contact your local Nice distributor. Technical support can be obtained through the official Nice webפּלאַץ אָדער אָטערייזד סערוויס סענטערס.
פֿאַר ווייטערדיקע הילף, ביטע באַזוכט די Nice official webפּלאַץ.
