1. הקדמה
This manual provides essential information for the safe and proper assembly, operation, and maintenance of your JAMARA 161208 Mustang P-51 Chassis. Please read these instructions thoroughly before use to ensure optimal performance and longevity of your product.
The JAMARA 161208 is a chassis designed for the Mustang P-51 model, featuring a wingspan of 1815 mm. This product is intended for hobbyists aged 14 years and older.
2. זיכערקייַט אינפֿאָרמאַציע
- השגחה פֿאַר אַדאַלץ: This product is recommended for users 14 years and older. Younger users require direct adult supervision.
- לייענען אינסטרוקציעס: Always read and understand the entire manual before assembly and operation.
- געהעריק מכשירים: Use appropriate tools for assembly. Incorrect tools can cause damage or injury.
- קליין טיילן: האַלטן קליין טיילן אויס פון דערגרייכן פון קינדער צו פאַרמייַדן טשאָוקינג כאַזערדז.
- אַפּערייטינג סוויווע: Operate the model in open, clear areas, away from people, animals, and obstacles.
- וישאַלט: קאָנטראָלירט רעגולער אַלע קאָמפּאָנענטן אויף טראָגן אָדער שעדיקן. פאַרבייטן געשעדיגטע טיילן גלייך.
3. פּעקל אינהאַלט
Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact your retailer immediately.
- JAMARA 161208 Mustang P-51 Chassis components
- Assembly hardware (screws, nuts, etc.)
- ינסטרוקטיאָן מאַנואַל (דעם דאָקומענט)
- Note: Additional components for the complete RC model (e.g., fuselage, wings, electronics, motor) are sold separately.
בילד 1: עקס.ample of JAMARA 161208 Mustang P-51 Chassis components. Actual contents may vary slightly.
4. סעטאַפּ און אַסעמבלי
Follow these steps for the correct assembly of your Mustang P-51 Chassis. Refer to the diagrams provided with your specific model kit for detailed visual guidance.
- ידענטיפיצירן קאַמפּאָונאַנץ: Lay out all chassis components and hardware. Familiarize yourself with each part.
- Main Landing Gear Installation: Securely attach the main landing gear struts to the designated mounting points on the fuselage structure. Ensure all screws are tightened firmly but do not overtighten.
- Retract Mechanism (if applicable): If your model includes a retractable landing gear system, install the retract units according to the model's specific instructions. Connect the pushrods to the control horns.
- Nose Gear Installation: Install the nose gear assembly, ensuring it can pivot freely and is properly aligned. Connect the steering mechanism if present.
- ראָד אַטאַטשמענט: Mount the wheels onto the axles. Use wheel collars or retaining clips to secure them, allowing for smooth rotation.
- פאַנגקשאַנאַל טשעק: Once assembled, manually check the movement of all landing gear components. Ensure there is no binding and that the gear extends and retracts smoothly.
- Integration with Aircraft: Carefully integrate the assembled chassis into your Mustang P-51 aircraft model, following the aircraft's specific assembly instructions.
וויכטיק: Ensure all connections are secure before proceeding to flight preparation. Loose components can lead to loss of control or damage.
5. אַפּערייטינג ינסטרוקטיאָנס
The JAMARA 161208 chassis is a component of an RC aircraft. Its operation is integrated with the overall aircraft control system.
- פאַר-פלי טשעק: Before each flight, verify that the landing gear extends and retracts correctly. Check for any loose screws or damaged parts.
- נעמען אַוועק: Ensure the landing gear is fully extended and locked before take-off.
- In-Flight: Retract the landing gear after take-off to reduce drag, if your model supports this feature.
- לאַנדינג: Extend the landing gear well in advance of landing. Confirm it is fully deployed and locked before touchdown.
- Control Surface Interaction: Ensure that the landing gear operation does not interfere with other control surfaces (ailerons, elevator, rudder).
6. וישאַלט
Regular maintenance will prolong the life of your chassis and ensure reliable operation.
- רייניקונג: After each use, clean the chassis components to remove dirt, grass, or debris. Use a soft brush or cloth. Avoid harsh chemicals.
- שמירן: Periodically apply a small amount of silicone-based lubricant to moving parts (e.g., pivot points, retract mechanisms) to ensure smooth operation. Avoid over-lubrication.
- דורכקוק: Regularly inspect for:
- Bent or damaged struts.
- Loose or missing screws/fasteners.
- Worn wheels or tires.
- Damage to retract mechanisms or linkages.
- סטאָרידזש: Store the chassis (and the complete model) in a dry, cool place, away from direct sunlight and extreme temperatures.
7. טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Landing gear does not extend/retract smoothly. | Dirt/debris in mechanism, lack of lubrication, bent component, loose linkage. | Clean mechanism, apply lubricant, inspect for bent parts and replace if necessary, check and secure linkages. |
| Wheels do not spin freely. | Axle bent, debris in wheel hub, wheel collar too tight. | Inspect and straighten/replace axle, clean wheel hub, adjust wheel collar. |
| Landing gear feels wobbly or loose. | Loose mounting screws, worn pivot points, damaged strut. | Tighten all mounting screws, inspect pivot points for wear and replace if needed, replace damaged strut. |
8. ספּעסאַפאַקיישאַנז
- מאָדעל נומער: 161208
- פּראָדוקט טיפּ: Mustang P-51 Chassis
- רעקאַמענדיד עלטער: 14 יאר און העכער
- פּעקל דימענשאַנז: 11.6 X 9 X 2.8 סענטימעטער (4.57 X 3.54 X 1.1 אינטשעס)
- פּעקל וואָג: 81.65 גראַמז (2.88 אונסעס)
- באַטעריז פארלאנגט: ניין
- באַטעריז אַרייַנגערעכנט: ניין
- ASIN: B003CJTM2I
- ערשטער דאַטע בנימצא: 12 אויגוסט 2022
- ספּער פּאַרץ אַוויילאַביליטי: אינפֿאָרמאַציע נישט פֿאַראַן
9. וואָראַנטי און שטיצן
For warranty information or technical support, please refer to the documentation provided with your complete JAMARA product or visit the official JAMARA webזייטל. האַלט דיין קויפן באַווייַז פֿאַר קיין וואָראַנטי קליימז.
באַמערקונג: ספּעציפֿישע וואָראַנטי טערמינען קענען זיין אַנדערש לויט געגנט און הענדלער.
