1. פּראָדוקט איבערview
The Lincoln Electric KP510 TIG Accessory Parts Kit is designed to provide essential consumables for maintaining and operating PTW-20 TIG torches. This kit includes a variety of components necessary for TIG welding, ensuring you have the right parts on hand for efficient operation.
The kit contains collets, collet bodies, a back cap, alumina nozzles, and tungsten electrodes in various sizes. All components are organized within a durable, reclosable box for convenient storage and transport.
2. קיט קאַמפּאָונאַנץ
The KP510 kit includes the following parts, designed for compatibility with PTW-20 TIG torches:
- קאַלאַץ: Components that hold the tungsten electrode securely in place.
- Collet Bodies: These hold the collet and direct the shielding gas flow.
- הינטערשטער קאַפּ: Seals the back of the torch head and provides a path for the tungsten electrode.
- Alumina Nozzles: Ceramic cups that direct the shielding gas to the weld puddle. Available in various sizes (e.g., #5, #6, #7) to control gas coverage.
- Tungsten Electrodes: Non-consumable electrodes that conduct the welding current. Provided in different diameters.
פיגורע 2.1: איבערview of the Lincoln Electric KP510 TIG Accessory Parts Kit, showing the clear plastic case containing various collets, collet bodies, alumina nozzles, a back cap, and tungsten electrodes.
פיגורע 2.2: דעטאַילעד view of individual components from the KP510 kit, including different sizes of alumina nozzles, collets, and collet bodies.
3. סעטאַפּ און ייַנמאָנטירונג
This section provides general guidance for installing the accessory parts into a PTW-20 TIG torch. Always refer to your specific TIG torch manual for detailed instructions.
- אויסקלייבן קאָמפּאָנענטן: Choose the appropriate size of collet, collet body, alumina nozzle, and tungsten electrode based on your welding application and current requirements.
- Install Collet Body: Thread the selected collet body into the torch head. Ensure it is finger-tight.
- Insert Collet and Tungsten: Insert the chosen collet into the collet body. Then, slide the tungsten electrode through the collet and collet body from the back of the torch.
- Attach Back Cap: Thread the back cap onto the torch body, tightening it to secure the tungsten electrode. Adjust the tungsten stick-out as needed.
- Attach Alumina Nozzle: Push or thread the selected alumina nozzle onto the front of the torch head, ensuring a snug fit.
- גאַז קשר: Verify that the shielding gas connection to the torch is secure and free from leaks.
באַמערקונג: Proper installation of these components is crucial for effective shielding gas coverage and stable arc performance. Incorrect assembly can lead to poor weld quality.
4. אפעראציע באטראכטונגען
Once the accessory parts are correctly installed, consider the following for optimal TIG welding performance:
- טונגסטאַן צוגרייטונג: Ensure your tungsten electrode is properly ground to the correct taper for your application.
- Shielding Gas Flow: Set the shielding gas flow rate according to the nozzle size and welding current. Insufficient flow can lead to porosity.
- סעלעקציע פון נעזל: Use the appropriate nozzle size for the joint configuration and desired gas coverage. Larger nozzles provide wider gas coverage.
- איצטיקע סעטטינגס: Adjust welding current based on material thickness and tungsten diameter.
5. וישאַלט
Regular maintenance of your TIG torch accessories ensures consistent welding performance and extends the life of your equipment.
- Inspect Alumina Nozzles: Regularly check nozzles for cracks, chips, or excessive spatter buildup. Replace damaged nozzles to maintain proper gas shielding.
- Clean Collets and Collet Bodies: Remove any spatter or debris from collets and collet bodies. Ensure they are clean to allow for proper tungsten seating and gas flow.
- Tungsten Replacement: Replace tungsten electrodes when they become contaminated, blunted, or too short for effective grinding.
- סטאָרידזש: Store unused components in the provided reclosable box to protect them from dust and damage.
6. טראָובלעשאָאָטינג פּראָסט ישוז
This section addresses common issues related to TIG torch consumables. For comprehensive torch troubleshooting, refer to your TIG welding machine's manual.
| אַרויסגעבן | Possible Cause (Consumable Related) | לייזונג |
|---|---|---|
| פּאָראָסיטי אין וועלד | Cracked or dirty alumina nozzle, incorrect gas flow, loose collet body. | Inspect/replace nozzle, check gas flow rate, tighten collet body. |
| אַנסטייבאַל אַרק | Contaminated or improperly ground tungsten, loose collet. | Regrind or replace tungsten, ensure collet is holding tungsten securely. |
| Tungsten Slipping | Worn collet, loose back cap. | Replace collet, tighten back cap. |
7. ספּעסאַפאַקיישאַנז
- סאָרט: לינקאָלן עלעקטריק
- מאָדעל נומער: KP510
- טייל נומער: KP510
- מאַטעריאַל: Alumina (for nozzles)
- נומער וואָג: 0.22 קילאָגראַם (אומגעפער 7.7 אונסעס)
- פּראָדוקט דימענשאַנז: 6 x 1 x 1 אינטשעס (פּאַקאַגינג)
- UPC: 015082165103
- אַרייַנגערעכנט קאַמפּאָונאַנץ: Kit (Collets, Collet Bodies, Back Cap, Alumina Nozzles, Tungsten)
8. זיכערקייַט אינפֿאָרמאַציע
ווארענונג: דער פּראָדוקט קענען ויסשטעלן איר צו קעמיקאַלז אַרייַנגערעכנט בלייַ, וואָס איז באַוווסט צו די שטאַט פון קאַליפאָרניאַ צו פאַרשאַפן ראַק און געבורט חסרונות אָדער אנדערע רעפּראָדוקטיווע שאָדן. פֿאַר מער אינפֿאָרמאַציע גיין צו www.P65Warnings.ca.gov.
Always follow general welding safety practices, including wearing appropriate personal protective equipment (PPE) such as welding helmets, gloves, and protective clothing.
9. וואָראַנטי און שטיצן
This product is sold without an explicit warranty. For product support or inquiries regarding Lincoln Electric products, please visit the official Lincoln Electric webפּלאַץ אָדער קאָנטאַקט זייער קונה סערוויס אָפּטיילונג.
