Wayne SWS75 Well Jet Pump 0.75 HP Instruction Manual

הקדמה

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Wayne SWS75 0.75 HP Shallow Well Jet Pump. Please read these instructions thoroughly before use to ensure proper function and longevity of the pump.

Image: Wayne Shallow Well Jet Pump branding banner.

זיכערקייַט אינפֿאָרמאַציע

Always observe safety precautions to reduce the risk of injury, electric shock, or property damage. This pump operates with electricity and water, which can be hazardous if not handled correctly.

• עלעקטריקאַל זיכערקייַט: Ensure all electrical connections comply with local codes. The motor is thermally protected to prevent overheating; however, proper wiring is crucial.
• וואַסער זיכערקייַט: Do not operate the pump dry. Ensure the pump is properly primed before starting.
• ייַנמאָנטירונג: Follow all installation instructions carefully. Improper installation can lead to pump failure or safety hazards.
• וישאַלט: אָפּשטעקן די מאַכט איידער איר דורכפירן קיין וישאַלט אָדער סערוויס.

פּראָדוקט איבערview

The Wayne SWS75 is a 0.75 horsepower shallow well jet pump designed for wells up to 25 feet deep. It features a durable cast iron volute and an efficient square flange motor that is thermally protected to prevent overheating.

בילד: פראָנט view of the Wayne SWS75 0.75 HP Shallow Well Jet Pump.

שליסל פֿעיִקייטן:

• Horsepower: 0.75 הפּ
• מאַקס לויפן קורס: 510 gallons per hour (GPH) at 50 PSI
• Well Depth: Suitable for wells 0 ft. to 25 ft. in depth
• אָפּזאָגן: 3/4 אינטש נפּט
• סאַקשאַן: 1-1/4 אינטש נפּט
• דרוק סוויטש: Pre-set at 30-50 PSI for automatic operation
• קאַנסטראַקשאַן: Durable cast iron volute with a dedicated priming port
• מאָטאָר: Efficient square flange motor, thermally protected
• פֿאַרזאַמלונג: Assembled in the USA with foreign and domestic parts.

Image: Diagram highlighting key features of the Wayne SWS75 pump, including USA assembly, self-priming, dual voltage, and intake/discharge sizes.

סעטאַפּ און ינסטאַלירונג

Proper installation is critical for the performance and safety of your pump. Consult a qualified professional if you are unsure about any steps.

1. Location and Mounting:

• Install the pump on a solid, level surface to minimize vibration.
• Ensure the pump is protected from freezing temperatures and direct weather exposure.
• The pump is designed for shallow wells up to 25 feet deep.

2. פּלאַמבינג קאַנעקשאַנז:

• Connect the suction line to the 1-1/4 inch NPT intake port.
• Connect the discharge line to the 3/4 inch NPT discharge port.
• Use appropriate pipe sealant on all threaded connections to prevent leaks.
• Ensure all piping is adequately supported to avoid strain on the pump.

3. פּרימינג די פּאָמפּע:

Before initial operation, the pump must be properly primed.

1. Remove the priming plug located on the pump volute.
2. Fill the pump volute completely with water through the dedicated priming port until water overflows.
3. שטעלט זיכער צוריק דעם פּריימינג פּלאָג.
4. Ensure the suction line is also filled with water to the well.

4. עלעקטריקאַל קאַנעקשאַן:

• The pump operates on 120 Volts and is dual voltage 120V/240V capable. Ensure your power supply matches the pump's configuration.
• Connect the pump to a dedicated, properly grounded electrical circuit.
• Consult a licensed electrician for wiring if you are not familiar with electrical installations.

אַפּערייטינג ינסטראַקשאַנז

Once installed and primed, the pump is ready for operation.

1. ערשט אָנהייב: Turn on the power supply to the pump. The pump should start and begin to build pressure.
2. אָטאַמאַטיק אָפּעראַציע: The integrated pressure switch is pre-set to turn the pump on at 30 PSI and off at 50 PSI, maintaining consistent water pressure.
3. מאָניטאָרינג: Observe the pressure gauge (if installed) to ensure the pump is operating within the expected pressure range.
4. קעסיידערדיק אָפּעראַציע: The pump is designed for intermittent use as demand requires. Avoid prolonged dry running.

וישאַלט

רעגולערע אויפהאלטונג גאראנטירט אפטימאלע פאָרשטעלונג און פארלענגערט די לעבן פון אייער פּאָמפּע.

• דיסקאַנעקט מאַכט: שטענדיק אָפּשטעקן די מאַכט צושטעל איידער איר דורכפירן קיין וישאַלט.
• דורכקוקן קאַנעקשאַנז: Periodically check all plumbing and electrical connections for leaks or corrosion. Tighten as necessary.
• ריינע ווענטילאַציעס: Ensure motor cooling vents are clear of debris to prevent overheating.
• ווינטעריזאַטיאָן: In areas subject to freezing temperatures, drain the pump and piping completely to prevent damage.

טראָובלעשאָאָטינג

די סעקציע באהאנדלט אלגעמיינע פראבלעמען וואס איר קענט באגעגענען מיט אייער פאמפ.

ספּעסאַפאַקיישאַנז

Detailed technical specifications for the Wayne SWS75 0.75 HP Shallow Well Jet Pump.

Performance Data (Gallons Per Hour - GPH):

Image: Performance table showing GPH at various depths (0', 5', 10', 15', 20', 25') for 30, 40, and 50 PSI.

וואָראַנטי אינפֿאָרמאַציע

The Wayne SWS75 Well Jet Pump comes with a 3-יאָר לימיטעד וואָראַנטי covering parts only. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the manufacturer's webפּלאַץ.

קונה שטיצן

For technical assistance, replacement parts, or further inquiries, please contact Wayne customer support. Contact details can typically be found on the manufacturer's official webזייטל אדער אין די פּאַקקאַגינג מאַטעריאַלן.

Note: Always provide your pump's model number (SWS75) and serial number when contacting support.