Rode NTG-2 Multi-Powered Shotgun Microphone User Manual

הקדמה

The Rode NTG-2 is a versatile, multi-powered condenser shotgun microphone designed for professional audio capture in various environments. It offers exceptional sound quality, low noise, and a full frequency response, making it ideal for film, video, television, and broadcast production. Its highly directional polar pattern ensures focused audio pickup, minimizing unwanted background noise.

שליסל פֿעיִקייטן אַרייַננעמען:

• Premium dual-powered design (P48 phantom power or AA battery).
• Low noise and full frequency response for clear audio.
• Highly directional super-cardioid polar pattern.
• Switchable 80Hz high-pass filter to reduce low-end rumble.
• לייכטע און דוראַבאַל מעטאַל קאַנסטראַקשאַן.

וואָס איז אין די קעסטל

Your Rode NTG-2 package includes the following components:

• ראָוד NTG-2 Multi-Powered שאַטגאַן מיקראָפאָן
• מיקראָפאָן קליפּ
• ווינדסקרעען
• Zip pouch for storage

סעטאַפּ

Setting up your NTG-2 microphone is straightforward. Follow these steps to get started:

1. אנשטעלן דעם מיקראָפאָן

The NTG-2 offers dual power options:

• P48 Phantom Power: Connect the microphone to a device (e.g., camera, audio recorder, mixer) that provides 48V phantom power via an XLR cable. The microphone will automatically draw power from this source.
• אַאַ באַטערי: For situations where phantom power is unavailable, the NTG-2 can be powered by a single AA battery. Unscrew the bottom cap of the microphone, insert a fresh AA battery with the correct polarity, and re-secure the cap.

Figure 1: The Rode NTG-2 Multi-Powered Shotgun Microphone. This image shows the full length of the microphone, highlighting its sleek black design and the perforated body.

2. קאַנעקטינג צו דיין מיטל

Connect the NTG-2 to your recording device using a standard XLR cable. Ensure the connection is secure to prevent signal loss.

3. High-Pass Filter Activation

The NTG-2 features a switchable 80Hz high-pass filter. This filter helps to reduce unwanted low-frequency noise, such as air conditioning hum, traffic rumble, or handling noise. Locate the small switch on the microphone body and slide it to the 'on' position to activate the filter when needed.

פיגור 2: א נאנטע בילד view of the Rode NTG-2 microphone body, clearly showing the switch for the 80Hz high-pass filter. This switch allows users to reduce low-frequency noise.

אפערירן דעם מיקראָפאָן

The Rode NTG-2 is a highly directional shotgun microphone, meaning it primarily picks up sound from directly in front of it. This characteristic is crucial for isolating desired audio sources and rejecting off-axis noise.

אָפּטימאַל פּלייסמאַנט

For best results, aim the microphone directly at your sound source. When used on a boom pole, position the microphone just out of frame, pointing towards the speaker's mouth. When mounted on a camera, ensure the microphone is pointed towards the subject.

Figure 3: The Rode NTG-2 microphone attached to a video camera, demonstrating a typical setup for on-camera audio recording. The microphone is positioned to capture sound from the direction the camera is facing.

ווינט ראַש רעדוקציע

Always use the included foam windscreen when recording outdoors or in windy conditions to minimize wind noise. For more severe wind, consider using an additional "dead cat" or furry wind cover (sold separately).

מאָניטאָרינג אַודיאָ

Always monitor your audio with headphones during recording to ensure optimal levels and to identify any unwanted noise or distortion. Adjust the input gain on your recording device as needed to achieve a strong, clean signal without clipping.

וישאַלט

To ensure the longevity and optimal performance of your Rode NTG-2 microphone, follow these maintenance guidelines:

• רייניקונג: Use a soft, dry cloth to wipe down the microphone body. Avoid using liquid cleaners or solvents, as these can damage the finish or internal components.
• סטאָרידזש: When not in use, store the microphone in its provided zip pouch or a protective case to shield it from dust, moisture, and physical damage.
• באַטערי פאַרבייַט: If using AA battery power, replace the battery when the indicator light (if present) shows low power, or if you notice a decrease in audio quality or output level. Remove the battery if the microphone will not be used for an extended period to prevent leakage.
• האַנדלינג: Handle the microphone with care. Avoid dropping it or subjecting it to strong impacts, as this can damage the sensitive internal capsule.

טראָובלעשאָאָטינג

If you encounter issues with your Rode NTG-2 microphone, consider the following common troubleshooting steps:

• קיין סאָונד רעזולטאַט:
  • Check all cable connections (XLR) to ensure they are secure.
  • Verify that phantom power is enabled on your recording device, or that a fresh AA battery is correctly installed in the microphone.
  • Ensure the input gain on your recording device is set appropriately.
• פארדרייט אדער אומקלאר קלאנג:
  • Check if the input gain on your recording device is too high, causing clipping. Reduce the gain if necessary.
  • Ensure the microphone is pointed directly at the sound source.
  • If recording outdoors, ensure the windscreen is properly installed to reduce wind noise.
• Excessive Low-End Noise/Rumble:
  • Activate the 80Hz high-pass filter switch on the microphone body.
  • Ensure the microphone is isolated from vibrations (e.g., using a shock mount, if available).

If problems persist, consult the official Rode support resources or contact their customer service.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

Rode offers a generous 10-year warranty upon registration of your NTG-2 microphone. For detailed warranty information, product registration, and technical support, please visit the official Rode webפּלאַץ.

You can also refer to the official User Manual (PDF) for additional information: אָפּלאָדירן PDF מאַנואַל