APEX אַוואַנסירטע סינטעטיש דיאַמאָנט טעסטער ינסטרוקציע מאַנואַל
APEX אַוואַנסירטע סינטעטיש דיאַמאָנט טעסטער ינסטרוקציע מאַנואַל

Thank you for your purchase of the GemTrue APEX DK10300 Developed for excellence in synthetic diamond testing.
It is important that you read this user guide to gain a good understanding of this device and how it should be used to obtain accurate test results.

  1. Press and hold the power button until it beeps, then release.
    ינסטאַללאַטיאָן גייד
  2. Wait for calibration to complete.
    ינסטאַללאַטיאָן גייד
  3. Please remove the cap and wait.
    ינסטאַללאַטיאָן גייד
  4. Choose the test option.
    ינסטאַללאַטיאָן גייד
  5. Always make sure to hold the metal touch areas during testing for accurate results.
    ינסטאַללאַטיאָן גייד
  6. Hold tester and Jewellery at 90 degrees to one another.
    ינסטאַללאַטיאָן גייד
  7. Press the probe firmly at 90 degrees onto the stone’s table facet to start the test.
    ינסטאַללאַטיאָן גייד
  8. Do not move or release. Wait for result.
    ינסטאַללאַטיאָן גייד
  9. Test result will appear on the screen.
    ינסטאַללאַטיאָן גייד
  10. Place loose stone on the plate. Press the probe firmly at a 90-degree onto the stone’s table facet
    ינסטאַללאַטיאָן גייד
  11. Select test again or return to main menu.
    ינסטאַללאַטיאָן גייד
  12. To turn off the device, press the shut down option.
    ינסטאַללאַטיאָן גייד
  13. Always replace the cap when you are not using the device
    ינסטאַללאַטיאָן גייד
  14. Insert the Type-C cable with a 5V / minimum 0.5A charger to recharge the device.
    ינסטאַללאַטיאָן גייד
  15. When plugged in, the power light is red, it turns green when fully charged.
    ינסטאַללאַטיאָן גייד

וויכטיק הערות

A. Battery Usage
Charge the tester fully before use. Low battery may affect accuracy. Recharge when the battery icon reaches the last red bar. Avoid using the tester while charging to prevent reducing battery life.
בי טשאַרדזשינג
Use the provided USB-C cable for optimal charging.
The front power light turns red when charging and green when fully charged.
Required charger: DC 5V/ Minimum 0.5A (does not support PD fast charging).
C. Retesting
Wait for the result to clear before retesting.
Allow stones to cool between tests to prevent heat buildup, which may affect results.
D. Testing Stones
This tester is designed for testing CVD/HPHT/Type Ila, Moissanite, Natural Diamond, Simulant, and Cubic Zirconia (CZ).
E. Stone Colour Range
Optimized for polished stones with D to M color range. Stones outside this range or unpolished stones may yield inaccurate results.
F. Stone Cut and Size
Designed for round brilliant-cut stones.
Minimum testing size: 0.2ct.
Fancy-shaped stones may cause inaccurate results.
G. Care Instructions
Clean the tester’s tip gently with the included polishing cloth if unused for several days.
Clean stones with a dry tissue before testing to remove dust or oils.
H. Professional Consultation
If the tester provides unexpected results, consult a qualified gemologist or gemological association for further assessment.

This Tester is Fully Patented
יו. עס. פּאַטענץ: 12,235,212 / 12,130,238/11,243,170/11,073,482 / 10,539,010/8,947
111/10,203,317/10,203,288/9,453,808
China Patents: קסנומקסקס / קסנומקס
האָנג קאָנג: HK40076121 EU: EP3032242B1

IMPORTANT SAFETY AND OPERATING GUIDELINES

UV Safety Warning
This device emits UV light briefly during testing. Avoid direct eye exposure to the probe sensor. When used as instructed, the UV light is safe and poses no harm to eyes or skin. Always follow safety guidelines for proper use.

קריקאָנלאָדלעך באַטערי ווארענונג
Charge the device only with the specified charger (DC 5V/Minimum 0.5A).
Do not overcharge or leave it plugged in after it is fully charged.
ויסמיידן יקספּאָוזינג די באַטאַרייע צו עקסטרעם טעמפּעראַטורעס אָדער דירעקט זונשייַן.
For safe disposal, follow local recycling guidelines for rechargeable batteries.

אַפּערייטינג טנאָים
אַפּערייטינג טעמפּעראַטור: 10°C צו 35°C (50°F צו 95°F)
סטאָרידזש טעמפּעראַטור: 20°C צו 25°C (68°F צו 77°F)
Air Humidity: 15% to 70%

GEMTRUE WARRANTY TERMS AND CONDITIONS
The Gem True” APEX comes with a 24-month warranty from the date of purchase, provided the device is used as instructed in this user guide.
The warranty covers only manufacturing defects. Battery warranty is valid for 6 months due to its consumable nature.

וואָראַנטי עקסקלוסיאָנס:
The warranty is void if the device has been disassembled, tampered with, or subjected to misuse.

באַגרענעצונג פון אַכרייַעס:

  • GemTrue® is not liable for any direct or indirect damages resulting from the use of this tester.
  • The device is sold “as is” with no additional warranties, except as required by applicable law.
  • GemTrue® reserves the right to modify these terms at any time.

GEMTRUE Logo

דאָקומענטן / רעסאָורסעס

APEX APEX אַוואַנסירטע סינטעטיש דיאַמאָנט טעסטער [pdf] אינסטרוקציע מאַנואַל
קוויקסטעסט, APEX פארגעשריטענער סינטעטישער דיאמאנט טעסטער, APEX, פארגעשריטענער סינטעטישער דיאמאנט טעסטער, סינטעטישער דיאמאנט טעסטער, דיאמאנט טעסטער

רעפערענצן

לאָזן אַ באַמערקונג

דיין בליצפּאָסט אַדרעס וועט נישט זיין ארויס. פארלאנגט פעלדער זענען אנגעצייכנט *